Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.
Filter
Showing 1393–1416 of 1863 results
As a floor standing equipment, Magnus 22 offers the maximum perShapence for your processes.
As a floor standing equipment, Magnus 22 offers the maximum perShapence for your processes.
The Biocen 22 centrifuge is our offer for users requiring a microcentrifuge with possible applications for microhematocrit and microtubes.
The Biocen 22 centrifuge is our offer for users requiring a microcentrifuge with possible applications for microhematocrit and microtubes.
Your personal centrifuge for the most demanding laboratory. Compact, quick, reliable and with precise control of operating parameters. Indispensable in separation processes for microvolumes, in which the relative centrifugal force must be high.
Your personal centrifuge for the most demanding laboratory. Compact, quick, reliable and with precise control of operating parameters. Indispensable in separation processes for microvolumes, in which the relative centrifugal force must be high.
The smallest in the family, offering the performance of biggest ones.
The new Microcen 24 emerges as the solution for all those laboratories which are looking for high performance and versatility in a small centrifuge. Allows work with up to 8 conical tubes of 15 ml. as well as other configurations, as its available…
The new Microcen 24 emerges as the solution for all those laboratories which are looking for high performance and versatility in a small centrifuge. Allows work with up to 8 conical tubes of 15 ml. as well as other configurations, as its available rotors can be exchanged easily.
This is an automated surface disinfection solution, offering an exclusive diffusion system that saturates the room atmosphere with hydrogen peroxide in gaseous form. It enables every cm² of surface to be treated uniformly, even in inaccessible ar…
This is an automated surface disinfection solution, offering an exclusive diffusion system that saturates the room atmosphere with hydrogen peroxide in gaseous form. It enables every cm² of surface to be treated uniformly, even in inaccessible areas.
Everything you need for PacBio sequencing.
Browse our collection of sample preparation kits, application kits, library prep and barcoding, and sequencing kits.
Everything you need for PacBio sequencing.
Browse our collection of sample preparation kits, application kits, library prep and barcoding, and sequencing kits.
The Long-read Sequencing – Revio System adds affordability, high throughput, and ease of use to a foundation of long reads, exceptional accuracy, and direct methylation detection.
The Long-read Sequen…
The Long-read Sequencing – Revio System adds affordability, high throughput, and ease of use to a foundation of long reads, exceptional accuracy, and direct methylation detection.
The Long-read Sequencing – Revio System empowers HiFi sequencing. It adds affordability, high throughput, and ease of use to a foundation of long reads, exceptional accuracy, and direct methylation detection.
With SPRQ™ chemistry, the Revio system helps you achieve more with less DNA, increasing efficiency, maximizing output, and reducing costs—empowering you to make more discoveries faster and affordably
The award-winning Pacbio – Long-read Sequencing – Sequel Systems are powered by HiFi sequencing technology and deliver highly accurate long reads.
The PacBio Sequel II and IIe systems provide all sc…
The award-winning Pacbio – Long-read Sequencing – Sequel Systems are powered by HiFi sequencing technology and deliver highly accurate long reads.
The PacBio Sequel II and IIe systems provide all scientists with access to high throughput, cost effective, highly accurate long-read sequencing.
The Pacbio – Short-read Sequencing – Onso System is an innovative benchtop short-read DNA sequencing platform with an extraordinary level of accuracy using PacBio sequencing by binding (SBB) technology. Ultra-high Q40+ data …
The Pacbio – Short-read Sequencing – Onso System is an innovative benchtop short-read DNA sequencing platform with an extraordinary level of accuracy using PacBio sequencing by binding (SBB) technology. Ultra-high Q40+ data quality allows you to break through limits of detection.
HiFi sequencing is the only long-read technology to provide 99.9% or better accuracy in every run. HiFi reads eliminate the tradeoff between read length and accuracy, allowing you to address your most complex biological question…
HiFi sequencing is the only long-read technology to provide 99.9% or better accuracy in every run. HiFi reads eliminate the tradeoff between read length and accuracy, allowing you to address your most complex biological questions. With over 1,000 peer-reviewed publications in 2023 alone and over 1,200 HiFi sequencers globally, Vega™ joins the PacBio® portfolio of reliable and established sequencing systems.
The milling center to portal and fixed bed for high speed machinings ESAGON, currently represents the more advanced generation of tools machines. Entirely characterized by a projected structure resorting…
The milling center to portal and fixed bed for high speed machinings ESAGON, currently represents the more advanced generation of tools machines. Entirely characterized by a projected structure resorting to the systems of optimization through calculation to finished elements, FEM, with the objective to get an extremely rigid and very dynamic configuration, has been conceived for answering to the widest and diversify applications of various customers and therefore can satisfy demands of machinings to 3, 4 and 5 axes.
SHARK is a high speed machining centre line with a fixed bed and a movable column. Being designed by means of the calculation of finite elements for machine structures (FEM), the machine represents an opt…
SHARK is a high speed machining centre line with a fixed bed and a movable column. Being designed by means of the calculation of finite elements for machine structures (FEM), the machine represents an optimised development assuring rigidity and vibration dumping during movements. In addition to that low friction rates and high axes acceleration values are important features which allow high dynamical performances in finishing and at the same time in roughing: a big advantage in reducing production costs during machining process.
The model HS-HSL-LINEAR is a high speed milling machine characterized for its fixed bed configuration and mobile uppercut. Projected with the aid of the modern methodologies of optimization through the calculation to finite elements, FEM, introduc…
The model HS-HSL-LINEAR is a high speed milling machine characterized for its fixed bed configuration and mobile uppercut. Projected with the aid of the modern methodologies of optimization through the calculation to finite elements, FEM, introduces a good point of meeting between rigidity in the movements and damping of the vibrations.
The model HSC-LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the cal…
The model HSC-LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.
The model ACTIVE FIVE is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The machine is equipped with a head to two continuous working axes. The planning with the aid of t…
The model ACTIVE FIVE is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The machine is equipped with a head to two continuous working axes. The planning with the aid of the system FEM has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling. If to this are added the low attritions and the elevated accelerations of the axes, are gotten so all the characteristics that allow to get particularly bright dynamic performances is in finish, that in roughing, to advantage of the economy of the whole cycle of milling.
The model BLADER LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the …
The model BLADER LINEAR is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration. Projected with the aid of the modern methodologies of optimization through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.
The model PHS is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The planning with the aid of the FEM system has allowed to optimize the calculation to finished elements m…
The model PHS is a high speed working center with fixed portal and mobile table solution characterized by a very compact and ergonomic line. The planning with the aid of the FEM system has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling.
TWIN CONCEPT is a line of high speed milling machines characterized by fixed and mobile bench, which varies from the double working area (patented) for independent machinings with 3-4-5 axes to the machinings of pieces with 3-4 independent axes or…
TWIN CONCEPT is a line of high speed milling machines characterized by fixed and mobile bench, which varies from the double working area (patented) for independent machinings with 3-4-5 axes to the machinings of pieces with 3-4 independent axes or with 5 axes at the same time time (patented) to complete the machinings of “twin” pieces with machinings to 3-4-5 axes. Having been projected through the calculation to ended elements, FEM, TWIN CONCEPT introduces all the good characteristics that countersign the OMV products.
The model ROLLER is a high speed working center with fixed portal and mobile table solution characterized by a head with continuous axis of positioning and from a rotary table as continuous working axis. The planning with the aid of the system FEM…
The model ROLLER is a high speed working center with fixed portal and mobile table solution characterized by a head with continuous axis of positioning and from a rotary table as continuous working axis. The planning with the aid of the system FEM has allowed to optimize the calculation to finished elements making the particularly rigid structures of this model with the total elimination of the vibrations in phase of milling.
In designing the DIAMOND machine the choice has fallen on the gantry structure concept design due to the main importance of WORKPIECE HELD IN A STEADY POSITION
This…
In designing the DIAMOND machine the choice has fallen on the gantry structure concept design due to the main importance of WORKPIECE HELD IN A STEADY POSITION
This allows maximum speed and accuracy as moving masses are always constant and known
WORKPIECE WEIGHT = VARIABLE MASS
MOVING AXES = CONSTANT MASS
Over ten years experience in thermal stabilization of the machine structures, see XS, FORMULA, INVAR etc., in ensuring the consistency of the machine accuracy in presence of ambient temperature changes, the gantry of the DIAMOND is completely insulated and thermo stabilized thanks to a patented thermal conditioning system, avoiding structural distortions caused by variations in the ambient temperature.
This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design to al…
This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design to allow large dimensional capacity in machining and the application in various industries
This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design …
This is the line of machining centre with “traditional technology”, duly designed for heavy duty machining on hard materials (steel, inconel, titanium, etc.). The concept of the ML line is a modular design to allow large dimensional capacity in machining and the application in various industries
The XS is the line of medium/large size gantry machines. It is dedicated to 3 – 5 axis high speed machining as well as heavy duty machining on hard materials (steel, inconel, titanium, etc). The possibility to have aut…
The XS is the line of medium/large size gantry machines. It is dedicated to 3 – 5 axis high speed machining as well as heavy duty machining on hard materials (steel, inconel, titanium, etc). The possibility to have automatic head changing system or as alternative, the automatic spindle cartridge change, allows the machines to be much flexible and suitable for complex machining both in moulds/dies industry and in aerospace industry.
The BF line features a full 5 axis milling head duly designed for profiling jobs in hard materials (steel, inconel, titanium, etc).
The BF line features a full 5 axis milling head duly designed for profiling jobs in hard materials (steel, inconel, titanium, etc).
© DKSH International Ltd. All Rights Reserved.
test block for Laos
Contact us
Please enter your details here:
test
