All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filtered (586)
Filters
Search
Show (586)
Cancel

Showing 193–216 of 586 results

  • Idex – Column Hardware – Sample Trap Columns

    Our Sample Trap Columns are optimized for protein and peptide separation/purification. We offer these columns in conductive and nonconductive, packed and unpacked versions. They are ideal for separating and concentrating and/or purifying biologica…

    Our Sample Trap Columns are optimized for protein and peptide separation/purification. We offer these columns in conductive and nonconductive, packed and unpacked versions. They are ideal for separating and concentrating and/or purifying biological samples for mass spectrometer. The heart of the Sample Trap is a fused silica capillary column. Available phases for our capillary columns include a Reversed-Phase, High Carbon Load C18 5µm/300Å Spherical Silica material and a SCX (Strong Cation Exchange) 5µm/85Å material.

    Learn MoreDone

  • Idex – Coned Fittings – LiteTouch® Fittings

    Our LiteTouch Fittings are specifically designed to effectively grip tubing at two compression points, holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard F…

    Our LiteTouch Fittings are specifically designed to effectively grip tubing at two compression points, holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard Fingertight fittings. LiteTouch Fittings are available for use with 1/32 inches, 1/16 inches, or 1/8 inches outer diameter tubing sizes, and for 10-32 or 1/4-28 coned ports. To avoid collapsing the inner diameter of your tubing, the LiteTouch system can be used on hard tubing only, such as stainless steel and PEEK polymer tubing. The LiteTouch Ferrule System is not recommended for repeated use in plastic ports.

    Learn MoreDone

  • Idex – Coned Fittings – MicroTight® Fittings

    MicroTight One-Piece Fittings are uniquely designed for use with the NanoPort™ and MicroTight Unions, Adapters and Inline MicroFilters. Specifically made for 360 μm outer diameter tubing, 1/32 inches outer diameter tubing, or our MicroTight Tub…

    MicroTight One-Piece Fittings are uniquely designed for use with the NanoPort™ and MicroTight Unions, Adapters and Inline MicroFilters. Specifically made for 360 μm outer diameter tubing, 1/32 inches outer diameter tubing, or our MicroTight Tubing Sleeves these fittings ensure superior fingertight connections with capillary tubing. MicroTight Fittings withstand temperatures up to 125 °C. The MicroTight family also includes a female nut matched with one of five dedicated ferrules for connecting specific tubing outer diameters.

    Learn MoreDone

  • Idex – Coned Fittings – NanoTight™ Fittings

    NanoTight Fittings are specifically designed to connect 70 μm–1 mm OD capillary tubing to any standard 10-32 coned port normally intended for 1/16 inches outer diameter tubing using the NanoTight Tubing Sleeves. The fittings can also be used to…

    NanoTight Fittings are specifically designed to connect 70 μm–1 mm OD capillary tubing to any standard 10-32 coned port normally intended for 1/16 inches outer diameter tubing using the NanoTight Tubing Sleeves. The fittings can also be used to connect any 1/16 inches outer diameter tubing.

    Learn MoreDone

  • Idex – Coned Fittings – One-Piece Fingertight Fittings

    Our original One-Piece Fingertight Fittings offer the convenience of making a tubing connection without the need for wrenches or specialized tools when tightening the fitting into place. It is ideal for HPLC applications. 

    Our original One-Piece Fingertight Fittings offer the convenience of making a tubing connection without the need for wrenches or specialized tools when tightening the fitting into place. It is ideal for HPLC applications. 

    Learn MoreDone

  • Idex – Coned Fittings – PEEK Fittings

    Our PEEK Fittings are biocompatible and offers excellent chemical resistance. They are simple to use and an economical choice.

    Our PEEK Fittings are biocompatible and offers excellent chemical resistance. They are simple to use and an economical choice.

    Learn MoreDone

  • Idex – Coned Fittings – PEEK Fittings with Knobs

    Our PEEK Fittings with Knobs are biocompatible and offers excellent chemical resistance. We designed these fitting to be simple, economic, and easy-to-use. It comes in one and two piece options. The multi-colored knob is designed to allow for easy…

    Our PEEK Fittings with Knobs are biocompatible and offers excellent chemical resistance. We designed these fitting to be simple, economic, and easy-to-use. It comes in one and two piece options. The multi-colored knob is designed to allow for easy identification.

    Learn MoreDone

  • Idex – Coned Fittings – Stainless Steel Fittings

    Stainless steel fittings remain the most popular fitting used on standard HPLC systems today, due to their high temperature resistance and high-pressure holding abilities.

    Stainless steel fittings remain the most popular fitting used on standard HPLC systems today, due to their high temperature resistance and high-pressure holding abilities.

    Learn MoreDone

  • Idex – Coned Fittings – Sure-Fit™ Connectors

    Our Sure-Fit™ connector gives you a perfect fit in nearly every 10-32 coned receiving port consistently for every connection. The Sure-Fit connector has a unique internal spring-tensioned mechanism that automatically self-adjusts to virtually an…

    Our Sure-Fit™ connector gives you a perfect fit in nearly every 10-32 coned receiving port consistently for every connection. The Sure-Fit connector has a unique internal spring-tensioned mechanism that automatically self-adjusts to virtually any port depth while maintaining constant pressure on the 1/16 inches outer diameter tubing.

    Learn MoreDone

  • Idex – Coned Fittings – Two-Piece Fingertight Fittings

    Our unique Two-Piece Fingertight Fittings feature a separate ferrule. With a two-piece design, you can replace just the ferrule instead of the entire unit, making these Fingertights more economical than the one-piece version. Use a standard knurle…

    Our unique Two-Piece Fingertight Fittings feature a separate ferrule. With a two-piece design, you can replace just the ferrule instead of the entire unit, making these Fingertights more economical than the one-piece version. Use a standard knurled head fitting for traditional fingertight applications, or use a fitting with wings built into the head for extra tightening leverage. 

    Learn MoreDone

  • Idex – Coned Fittings – Two-Piece SealTight™ Fingertight Fittings

    The dual compression created by the specially designed nut and ferrule enables the SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SealTight Ferrule provides gripping power and a leak-free seal v…

    The dual compression created by the specially designed nut and ferrule enables the SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SealTight Ferrule provides gripping power and a leak-free seal via conventional compression by the receiving port.

    Learn MoreDone

  • Idex – Connectors – NanoPort Assemblies

    NanoPort Assemblies provide consistent fluid connections for chip-based analyses. Our unique design prevents adhesive contamination of the fluid path. Once attached, NanoPort connections can withstand pressures to 1,000 psi (69 bar).

    NanoPort Assemblies provide consistent fluid connections for chip-based analyses. Our unique design prevents adhesive contamination of the fluid path. Once attached, NanoPort connections can withstand pressures to 1,000 psi (69 bar).

    Learn MoreDone

  • Idex – Degassers – Aqueous Degassing

    The Aqueous degassing chambers offer the highest flow rates and efficiencies available. The silicone based degassing membrane is completely non-porous providing long life that will not clog over time with excessive amounts of water coming through …

    The Aqueous degassing chambers offer the highest flow rates and efficiencies available. The silicone based degassing membrane is completely non-porous providing long life that will not clog over time with excessive amounts of water coming through the vacuum side like with porous based high flow products. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

    Learn MoreDone

  • Idex – Degassers – Debubblers

    Debubblers utilize a porous Poridex membrane to rapidly clear bubblers from locations where bubble introduction cannot be avoided. When Poridex is used as a degassing transfer line tail it can also remove dissolved gases in locations where a stand…

    Debubblers utilize a porous Poridex membrane to rapidly clear bubblers from locations where bubble introduction cannot be avoided. When Poridex is used as a degassing transfer line tail it can also remove dissolved gases in locations where a standard degassing chamber won’t fit. Due to the porous nature of Poridex it can only be used with water based solutions without detergents or emulsifiers.

    Learn MoreDone

  • Idex – Degassers – Full Stand Alone Degassing System

    The Stand Alone Degassers are designed for use alongside your fluidic system. Simply plug in the unit and route your fluids through the degasser for consistent gas free fluids.

    The Stand Alone Degassers are designed for use alongside your fluidic system. Simply plug in the unit and route your fluids through the degasser for consistent gas free fluids.

    Learn MoreDone

  • Idex – Degassers – Mini Degassing Chambers

    The Mini Degassing Chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Systec AF. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degas…

    The Mini Degassing Chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Systec AF. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

    Learn MoreDone

  • Idex – Degassers – OEM Degassing System

    The OEM line of degassing system products provide a complete open fame degasser ready to be integrated into your fluidic instrumentation.

    The OEM line of degassing system products provide a complete open fame degasser ready to be integrated into your fluidic instrumentation.

    Learn MoreDone

  • Idex – Degassers – Prep Chamber

    The Preparative degassing chambers are designed for solvent HPLC based reagent compatibility and flow rates between 20-40ml/min. These chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Sys…

    The Preparative degassing chambers are designed for solvent HPLC based reagent compatibility and flow rates between 20-40ml/min. These chambers provide degassing with long life and the widest range of chemical compatibility by using non-porous Systec AF. Couple the degassing chamber with a vacuum control system to maintain stable vacuum levels for optimal degassing efficiency.

    Learn MoreDone

  • Idex – Degassers – Vacuum Control System

    The Vacuum Control Systems are designed for use with any IDEX degassing chamber. The electronics are integrated and maintain precise vacuum levels for consistent error free degassing. 

    The Vacuum Control Systems are designed for use with any IDEX degassing chamber. The electronics are integrated and maintain precise vacuum levels for consistent error free degassing. 

    Learn MoreDone

  • Idex – Filters – Bottom-of-the-Bottle™ Filters

    Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out particulate matter that my otherwise damage expensive hardware. Our durable stainless steel specifically designed to allow solvents to be drawn fro…

    Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out particulate matter that my otherwise damage expensive hardware. Our durable stainless steel specifically designed to allow solvents to be drawn from within 1/8 inches of the bottom of your bottle. Our UHMWPE version allows tubing to pass through to the bottom of the filter cup, enabling the filter to draw solvent from within 0.10 inches (2.5 mm) of the bottom of your solvent bottle. This widely known and durable polymer is an economical choice. Our PEEK version is biocompatible and includes two built-in PEEK frits. Our PEEK frit (2 μm or 10 μm) will draw solvents from within 0.080 inches (2.0 mm) of the bottom of the solvent bottle. The 2μm frit on the side may be used for a 1/8 inches outer diameter helium sparging line.

    Learn MoreDone

  • Idex – Filters – Filter Cups

    Our economical, replacement Filter Cups are made of durable stainless steel and are for use with Bottom-of-the-Bottle™ filter assemblies. Our easy to use cups have come with a porosity of 10µm and 2µm and are designed for use with the A-550 an…

    Our economical, replacement Filter Cups are made of durable stainless steel and are for use with Bottom-of-the-Bottle™ filter assemblies. Our easy to use cups have come with a porosity of 10µm and 2µm and are designed for use with the A-550 and A-522 Filter assemblies.

    Learn MoreDone

  • Idex – Filters – Filter Fittings

    Our Filter Fittings are designed to be used for different applications. Our Inline MicroFilter End-Fitting comes with a PEEK Frit. Our fitting helps to protect your column from particles produced in the sample phase or from pump seal and sample in…

    Our Filter Fittings are designed to be used for different applications. Our Inline MicroFilter End-Fitting comes with a PEEK Frit. Our fitting helps to protect your column from particles produced in the sample phase or from pump seal and sample injection valve wear. Filter End Fittings are made of biocompatible PEEK giving it excellent chemical resistance.

    Learn MoreDone

  • Idex – Filters – Inlet Solvent Filters

    We offer general use, preparative and specialized versions of Inlet Solvent Filters for many applications. Our filters come in stainless steel and polymer versions for excellent chemical compatibility. We provide a wide selection of porosities and…

    We offer general use, preparative and specialized versions of Inlet Solvent Filters for many applications. Our filters come in stainless steel and polymer versions for excellent chemical compatibility. We provide a wide selection of porosities and materials to meet your system requirements.

    Learn MoreDone

  • Idex – Filters – Inline Filters

    Our Inline Filters are specially engineered for inline filtration. It is specifically designed to help prevent particulate contamination from clogging sensitive equipment. It is ideally suited for placement along the flow path line between the pum…

    Our Inline Filters are specially engineered for inline filtration. It is specifically designed to help prevent particulate contamination from clogging sensitive equipment. It is ideally suited for placement along the flow path line between the pump and injection valve/autosampler. We offer a variety of porosities for your application.

    Learn MoreDone
About DKSH

Who We Are

Lab Solutions

Services

Business Lines

Commercial and Industrial Applications

Precision Machinery

Scientific Solutions

Semiconductor & Electronics

Order Online

LabShop

Delivering Growth – in Asia and Beyond

Follow Us

© DKSH International Ltd.  All Rights Reserved.

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test