All Products

Showing 1609–1632 of 1866 results

Skalar – Automated Wet Chemistry Analyzer – San Series
The San Series of Automated Wet Chemistry Analyzers also known as Continuous Flow Analyzers have been designed as modular systems to meet the needs of laboratories that process a few samples or large volumes of samples. Based on the Continuous Flo…

The San Series of Automated Wet Chemistry Analyzers also known as Continuous Flow Analyzers have been designed as modular systems to meet the needs of laboratories that process a few samples or large volumes of samples. Based on the Continuous Flow Analysis (CFA) or also called Segmented Flow Analysis (SFA) technique, up to 16 analytical measurements (depending on the model) can be made on a single sample simultaneously. With the addition of rinsing valves and software the San Series of analyzers can automate; start-up, shut-down, dilutions, re-runs, clean-up, and raw data storage

Learn More
Skalar – BluVision Discrete Analyzer
The BluVisionTM is specially designed for environmental labs that have a wide variety of sample types and matrices for analysis. The Skalar discrete analyzer automates the sample & reagent pipetting into the cuvettes, mixing, heating and measu…

The BluVisionTM is specially designed for environmental labs that have a wide variety of sample types and matrices for analysis. The Skalar discrete analyzer automates the sample & reagent pipetting into the cuvettes, mixing, heating and measuring of the reaction product.

Learn More
Skalar – Robotic Analyzer – SP2000
The SP2000 analyzers automate all manual handling steps in the procedure of an application such as sample dilution, capping / de-capping, liquid handling, mixing, addition of reagents etc. Skalar has automated the following appl…
The SP2000 analyzers automate all manual handling steps in the procedure of an application such as sample dilution, capping / de-capping, liquid handling, mixing, addition of reagents etc. Skalar has automated the following applications:
- Biochemical Oxygen Demand (BOD)
- Chemical Oxygen Demand (COD) according to ISO 6060
- Test kit applications including ST-COD according to ISO 15705, pH, Conductivity (EC), Alkalinity, Acidity, Hardness, Carbonate / Bicarbonate and other titrations, Turbidity and Color, Ion Selective Electrode (ISE) measurements
- Particle size distribution analysis in soil
- Bitterness and other parameters in beer/wort
- Sample preparation techniques (filtration, distribution, pipetting etc.)
Learn More
Skalar – TOC & TN Analyzer for Liquid Sample – Formacs Series
The Formacs SERIES Total Organic Carbon (TOC) and Total Nitrogen (TN) analyzers have been designed to measure TOC and TN separately or simultaneously in liquid samples.

The flexible design ensures optimal performance and is operational with…

The Formacs SERIES Total Organic Carbon (TOC) and Total Nitrogen (TN) analyzers have been designed to measure TOC and TN separately or simultaneously in liquid samples.

The flexible design ensures optimal performance and is operational within minutes, providing accurate analyses for Total Carbon (TC), Total Inorganic Carbon (TIC), TOC, Non-Purgeable Organic Carbon (NPOC), and TN. As an additional option, the concentration of Nitrate and Nitrite (NN) can be measured which results in a true alternative to the Total Kjeldahl Nitrogen (TKN) method (TKN = TN – NN). This eliminates the need for hazardous reagents, which are required for the conventional TKN analysis. In this way, valuable operator time is saved and better precision is achieved.

The user-friendly analyzers allow quick and easy access to all components and include a versatile software package for complete instrument control, data acquisition, calculations, and report generation.

Learn More
Skalar – TOC & TN Analyzer for Solid & Liquid Sample – Primacs Series
The PrimacsSERIES provides fast, reliable, accurate, and low-level analysis of Total Nitrogen / Protein, Total Carbon, Total Organic Carbon, Total Elemental Carbon, and Total Inorganic Carbon all in one unit.

The PrimacsSERIES provides fast, reliable, accurate, and low-level analysis of Total Nitrogen / Protein, Total Carbon, Total Organic Carbon, Total Elemental Carbon, and Total Inorganic Carbon all in one unit.

The measurement of TC, TOC, TEC, and TIC is based on high-temperature catalytic combustion with Non-Dispersive Infrared detection (NDIR). The temperature settings are variable and a special temperature ramping program allows the analysis of TEC, according to DIN 19539. The TN/Protein analysis is based upon DUMAS methodology and detection with Thermal Conductivity (TCD). TIC can also be determined separately using automatic acidification and purging. All systems come with a practical and flexible software package, with pre-installed method files, user-definable sample table set up, integrated QC features, etc.

The analyzer contains a large integrated 100 position autosampler with a unique vertical sample introduction system. The sample ashes remain in the crucible after the analysis and are taken out to the instrument with the removal of the crucible. This avoids sample ash build-up in the combustion zone and therefore reduces maintenance.

Learn More
SMT – Full Convection Reflow Soldering Systems
The reflow soldering systems from SMT Wertheim stand for maximum efficiency and high product throughput with stable soldering quality.

The reflow soldering systems from SMT Wertheim stand for maximum efficiency and high product throughput with stable soldering quality.

Learn More
Solarius – AOP
The AOP platform is the most flexible and modular Solarius solution for all kinds of customized measurement tasks. Depending on the indivisual task, it can be equipped with different 3D measuring sensors out the entire available…

The AOP platform is the most flexible and modular Solarius solution for all kinds of customized measurement tasks. Depending on the indivisual task, it can be equipped with different 3D measuring sensors out the entire available technology portfolio, many sizes of motion systems and customized software. Its flexibility supports a wide variety of applications and working environments and can be tailored to meet each customer’s requirements.

Learn More
Solarius – Atlas

The new Polaris Desktop 3D surface measuring system from Solarius enables highly accurate and precise 3D imaging of surfaces. While th…

The new Polaris Desktop 3D surface measuring system from Solarius enables highly accurate and precise 3D imaging of surfaces. While the Polaris and the Polaris Plus are equal in accuracy and precision, the Polaris offers a cost effective variant for many applications. The Polaris Plus expands the scope of application due to its extensive equipment, which supports in particular simple automation of the measurement tasks.

Learn More
Solarius – Polaris
The new Polaris Desktop 3D surface measuring system from Solarius enables highly accurate and precise 3D imaging of surfaces. While the Polaris and the Polaris Plus are equal in accuracy and precision, the Polaris offers a cost …

The new Polaris Desktop 3D surface measuring system from Solarius enables highly accurate and precise 3D imaging of surfaces. While the Polaris and the Polaris Plus are equal in accuracy and precision, the Polaris offers a cost effective variant for many applications. The Polaris Plus expands the scope of application due to its extensive equipment, which supports in particular simple automation of the measurement tasks.

Learn More
Solarius – Viking
The Viking is an optical non-contact profilometer for affordable 3D surface and roughness measurements. Its small footprint and light weight design makes it ideal as a desktop 3D measurement tool. It is designed to meet mid-rang…

The Viking is an optical non-contact profilometer for affordable 3D surface and roughness measurements. Its small footprint and light weight design makes it ideal as a desktop 3D measurement tool. It is designed to meet mid-range accuracy and quality control needs using state-of-the-art sensor technology to generate 3D surface topography maps and ISO compliant roughness information.

Learn More
Solida – Laboratory Bioreators
Solida Biotech manufacture a wide range of bioreactors, fermenters, at-line analysers, CIP/SIP systems and process vessels for research, development, and production, suitable for fermentation, cell culture, stem cells, enewable technologies, algae…

Solida Biotech manufacture a wide range of bioreactors, fermenters, at-line analysers, CIP/SIP systems and process vessels for research, development, and production, suitable for fermentation, cell culture, stem cells, enewable technologies, algae, biomass, biofuel, hydrolysis and more.

Learn More
Solida Biotech Bioprocess Analysers
Laboratory and industrial production process control requires a fast and accurate analysis of sample to allow optimum operating conditions to be set and maintained. This can apply equally to food and beverage production, pharmaceutical products or…

Laboratory and industrial production process control requires a fast and accurate analysis of sample to allow optimum operating conditions to be set and maintained. This can apply equally to food and beverage production, pharmaceutical products or biopharmaceutical manufacturing systems for both cell culture and microbial applications.

Learn More
Solidfog – Disinfection – DosyMist XL
The DosyMist XL® is a stand-alone VH2O2 generator designed for the bio-decontamination of large areas. These units can be remotely controlled and synchronised with other equal units via facility management systems.

The DosyMist XL® is a stand-alone VH2O2 generator designed for the bio-decontamination of large areas. These units can be remotely controlled and synchronised with other equal units via facility management systems.

Learn More
SOMA – Laminators – Lamiflex E
A wide range of flexible packaging laminates can be produced on the LAMIFLEX series laminators using solvent free adhesives. It avoids solvent emission and eliminates the need for a heated drying tunnel and offers cost effective…
A wide range of flexible packaging laminates can be produced on the LAMIFLEX series laminators using solvent free adhesives. It avoids solvent emission and eliminates the need for a heated drying tunnel and offers cost effective and cost saving solution, which also benefits the environment.

High level duplex solventless laminator for widest range of substrates
- Cantilevered sleeved transfer roller
- Cooling cylinder for ALU foil laminates
- Shaft-less unwinders and rewinder
- Precise tension control through dancer roller
- Micrometric setting of glue application gap
Learn More
SOMA – Die Cutters – Bulldog
The Bulldog machine is a roll-fed die cutter mainly designed for the production of foil lids for yogurt containers. The die cutting technique is of very high precision to ensure perfect edge quality. The long life die cutting tool consists of mult…

The Bulldog machine is a roll-fed die cutter mainly designed for the production of foil lids for yogurt containers. The die cutting technique is of very high precision to ensure perfect edge quality. The long life die cutting tool consists of multiple dies that enable several lids to be punched per stroke. Various lid shapes, formats and embossing patterns are possible.

Learn More
SOMA – Flexographic Printing Presses – Optima Series
When designing Optima, we focused on bouncing and registration accuracy issues and developed Advanced Bounce Control System to raise your confidence in high speed printing of problematic designs. We implemented IRIS to address short run issues. We…

When designing Optima, we focused on bouncing and registration accuracy issues and developed Advanced Bounce Control System to raise your confidence in high speed printing of problematic designs. We implemented IRIS to address short run issues. We also made OPTIMA ready for Expanded Gamut, Environmental (WB) Printing or UV LED.

Learn More
SOMA – Plate Mounters – Flexmont & S-Mount

The FLEXMONT series of …

The FLEXMONT series of plate mounting machines are designed for fast and accurate plate mounting to ensure the superior print quality of OPTIMA flexo printing presses.

Flexmont

An entry level machine designed for maximum precision and high repeatable accuracy achieved by manual mounting of the plates.

S-Mount

Sophisticated plate mounter designed for full automation of either of the two processes 1) plate mounting, 2) register and impression setting later during the printing process.

Learn More
SOMA – Slitter Rewinders – Pluto III, Venus III & Venus III-T
When designing our slitter rewinders, we added various features that allow slitting of difficult materials such as diaper membrane, thin filtration non woven or rigging PET up to 700 microns. Our slitter offer different levels of automation as wel…

When designing our slitter rewinders, we added various features that allow slitting of difficult materials such as diaper membrane, thin filtration non woven or rigging PET up to 700 microns. Our slitter offer different levels of automation as well as customization, for example laser perforation.

Learn More
Sonics – Ultrasonic Processor – VCX 130
VCX 130 130 Watts Processing Volume: 200µl – 150mL* This model offers the same programmability as larger VCX versions.

VCX 130 130 Watts Processing Volume: 200µl – 150mL* This model offers the same programmability as larger VCX versions.

Learn More
Sonics – Ultrasonic Processor – VCX 500
VCX 500 500 Watts Processing Volume: 0.2mL – 1L* The VCX 500 offers 500 watts of power to handle a range of liquid processing applications. This model shares the same microprocessor based operating system and programming screens as the VCX750 sy…

VCX 500 500 Watts Processing Volume: 0.2mL – 1L* The VCX 500 offers 500 watts of power to handle a range of liquid processing applications. This model shares the same microprocessor based operating system and programming screens as the VCX750 system.

Learn More
Sonics – Ultrasonic Processor – VCX 750
The VCX 750 is a powerful and versatile ultrasonic liquid processor. Using a variety of accessories, the system can process a wide range of sample types and volumes for many different applications. The VCX 750 is microprocessor based and programma…

The VCX 750 is a powerful and versatile ultrasonic liquid processor. Using a variety of accessories, the system can process a wide range of sample types and volumes for many different applications. The VCX 750 is microprocessor based and programmable. Intuitive screens are user friendly and easy to navigate. The 750 watt power supply has the capability of operating our largest assortment of horns and accessories.

Learn More
Sopat – Microscope Probe – MM-Probe
The SOPAT MM-Probe is a microscope probe with high magnification. It is characterized by its high resolution and is especially suited to characterizing biological systems (Yeast cells, bacteria, algae, water purification, etc.) …

The SOPAT MM-Probe is a microscope probe with high magnification. It is characterized by its high resolution and is especially suited to characterizing biological systems (Yeast cells, bacteria, algae, water purification, etc.) as well as fine emulsions with drop sizes of 1 µm and larger.

Learn More
Sopat – Probe – Macroscopic Probes
The protection tube that comes into contact with the medium is variably adjustable in terms of length, as well as temperature and pressure durability. This flexibility allows the fabrication of a SOPAT particle measurement system optimally tuned t…

The protection tube that comes into contact with the medium is variably adjustable in terms of length, as well as temperature and pressure durability. This flexibility allows the fabrication of a SOPAT particle measurement system optimally tuned to your production process. With the help of the SOPAT probes, inline measurement of particle sizes is possible between 0,5 and 9.300 µm. The SOPAT InView allows atline measurements to the size of 50.000 µm. SOPAT relies on the technical know-how of the company, innovative developments of the system, and high-quality materials in production.

Learn More
Sopat – Probe – Mesoscopic Probes
Ideal for the range of 1.5 to 2,600 µm. They are autoclavable and therefore suited for CIP (cleaning in place) and SIP (sterilization in place).

Ideal for the range of 1.5 to 2,600 µm. They are autoclavable and therefore suited for CIP (cleaning in place) and SIP (sterilization in place).

Learn More