All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filtered (141)
Filters
Search
  • Select Business Lines first
  • Select Business Lines first
Show (141)
Cancel

Showing 121–141 of 141 results

  • Idex – Valve Spare Parts – RheBuild® Kits

    RheBuild® Kits offer an easy and cost effective way to maintain most of our valve products. Included in each individualized RheBuild Kit are all the parts, tools, and instructions to maintain the precision performance of our valve platforms. RheB…

    RheBuild® Kits offer an easy and cost effective way to maintain most of our valve products. Included in each individualized RheBuild Kit are all the parts, tools, and instructions to maintain the precision performance of our valve platforms. RheBuild Kits are convenient and eliminate the need to order individual parts separately.

    Learn MoreDone

  • Idex – Valve Spare Parts – Rotor Seals

    Our Rotor Seals are polymeric discs that ensure a high pressure seal against our stators.

    Our Rotor Seals are polymeric discs that ensure a high pressure seal against our stators.

    Learn MoreDone

  • Idex – Valve Spare Parts – Stators

    Our Stators are manufactured from material that has been researched and selected for their physical and mechanical strengths. Stators need replacement only if the threaded ports or sealing surfaces become damaged.

    Our Stators are manufactured from material that has been researched and selected for their physical and mechanical strengths. Stators need replacement only if the threaded ports or sealing surfaces become damaged.

    Learn MoreDone

  • Idex – Valves – Back Pressure Regulators

    Back Pressure Regulators are designed to enhance system performance through outgassing prevention and improved pump check valve efficiency. It includes 5 and 20psi assemblies (replacement cartridges not available), a variety of pressure rated cart…

    Back Pressure Regulators are designed to enhance system performance through outgassing prevention and improved pump check valve efficiency. It includes 5 and 20psi assemblies (replacement cartridges not available), a variety of pressure rated cartridges and assemblies, PEEK and stainless steel BPR holders, high pressure adjustable BPR for pressure between 2000 and 5000psi and ultra-low volume BPRs set to 100 and 500psi.

    Learn MoreDone

  • Idex – Valves – Manual Valves

    Manual Valves are ideal if your application involves low frequency of use, demands operator control, or involves injection of varying sample volumes. We offer a wide selection of easy to use manual valves that include switching, injection, and sel…

    Manual Valves are ideal if your application involves low frequency of use, demands operator control, or involves injection of varying sample volumes. We offer a wide selection of easy to use manual valves that include switching, injection, and selection valves. Note: For Valves please allow an additional 8 days lead time.

    Learn MoreDone

  • Idex – Valves – Rotary Shear Valves

    We developed our Rotary Shear Valves in tandem with the evolution of HPLC offering solutions to the ever changing fluidics landscape. With the introduction of elevated system pressures, aggressive chemicals, and decreasing fluid volumes the need f…

    We developed our Rotary Shear Valves in tandem with the evolution of HPLC offering solutions to the ever changing fluidics landscape. With the introduction of elevated system pressures, aggressive chemicals, and decreasing fluid volumes the need for highly precise fluid control and delivery is imperative. Today, many other disciplines use Rotary Shear Valves for their versatility, reliability, repeatability, and easy maintenance.

    Learn MoreDone

  • Idex – Valves – Stand Alone Valves

    Our Stand Alone Valve Products offer more sophisticated functionality. Versatile, they can be added to your existing instrument or in stand-alone lab configurations. Choose an automated valve if the application requires fast, consistent sample inj…

    Our Stand Alone Valve Products offer more sophisticated functionality. Versatile, they can be added to your existing instrument or in stand-alone lab configurations. Choose an automated valve if the application requires fast, consistent sample injection or flow-stream switching. Some other advantages of automated valves include control options (PC- or instrument-triggered), higher pressure operation, valve-position feedback, or very small flow paths. Note: For Valves please allow an additional 8 days lead time.

    Learn MoreDone

  • Idex – Valves – Valve Accessories

    Our valve accessories include a variety of products that work with and are specific to our valve mechanics. From Sample Loops, driver boards, or to mounting brackets we offer a wide array of accessories to meet your system requirements. We also in…

    Our valve accessories include a variety of products that work with and are specific to our valve mechanics. From Sample Loops, driver boards, or to mounting brackets we offer a wide array of accessories to meet your system requirements. We also include tools that work specifically with our valve and valve components.

    Learn MoreDone

  • Idex – VHP Fittings – Micro Fittings

    Micro Fittings are specifically designed for use with microferrules. They are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200° C) and higher pressures ideal for UHPLC applications.

    …

    Micro Fittings are specifically designed for use with microferrules. They are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200° C) and higher pressures ideal for UHPLC applications.

    Learn MoreDone

  • Idex – VHP Fittings – Reusable VHP Fittings

    Our reusable VHP Fittings are capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over. They are pressure rated up to 25000psi making them ideal for UHPLC applications. They are designed for the most com…

    Our reusable VHP Fittings are capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over. They are pressure rated up to 25000psi making them ideal for UHPLC applications. They are designed for the most commonly used ports in UHPLC that being 10-32 threads for 1/16 inches outer diameter tubing and M4 threads for 1/32 inches outer diameter. They are manufactured from stainless steel and proprietary PEEK polymer blend (PK) ensuring strength and chemical compatibility.

    Learn MoreDone

  • Idex – VHP Fittings – Stainless Steel VHP Fittings

    These fittings are ideal for UHPLC applications. Our all Stainless-Steel VHP Fittings include a unique ferrule system with two compression points to provide twice the grip of a standard ferrule allowing pressure up to 30000psi. This design also al…

    These fittings are ideal for UHPLC applications. Our all Stainless-Steel VHP Fittings include a unique ferrule system with two compression points to provide twice the grip of a standard ferrule allowing pressure up to 30000psi. This design also allows the bite on the tubing to be less concentrated and does not restrict the inner diameter. The ferrules for 1/16 inches outer diameter tubing and 10-32 coned ports are two pieces, while the grooved ferrule for 1/32 inches outer diameter tubing and M4 coned ports is a one-piece design for easier handling, but it will act as two pieces with double compression on the tubing as it is tightened down.

    Learn MoreDone

  • Idex – VHP Fittings – VHP PK Fittings

    Our UHPLC fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures. The VHP PK One-Piece fittings are available for 10-32 coned, 6-32 coned, or M4 coned po…

    Our UHPLC fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures. The VHP PK One-Piece fittings are available for 10-32 coned, 6-32 coned, or M4 coned ports, and Two-Piece fittings are available to connect either 1/16 inches or 1/32 inches outer diameter tubing into 10-32 coned ports in multiple styles. VHP MicroFerrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments. The new high pressure MicroFerrules are available for use with 1/32 inches or 360 μm outer diameter tubing, and they are incorporated into several of our VHP products for capillary tubing.

    Learn MoreDone

  • Idex – Fluidic Tubing Sleeves – 1/16 Inches Outer Diameter PEEK Tubing Sleeves

    Like the NanoTight™ FEP Sleeves, these PEEK Tubing Sleeves are designed to be used with 1/16 inches outer diameter, 10-32 threaded fittings to adapt capillary tubing to standard coned ports. They are designed to withstand higher pressure than th…

    Like the NanoTight™ FEP Sleeves, these PEEK Tubing Sleeves are designed to be used with 1/16 inches outer diameter, 10-32 threaded fittings to adapt capillary tubing to standard coned ports. They are designed to withstand higher pressure than the FEP sleeves. Made of PEEK polymer, these 1.3 inches long sleeves can be used up to 125 °C. These sleeves require a wrench tightened nut to achieve proper sealing. We recommend the F-140 Two-Piece Fingertight Fitting, which includes a PEEK ferrule or the hex-head SealTight™ fittings. Many researchers also use a stainless steel nut and ferrule with these sleeves, such as our U-400 and U-401.

    Learn MoreDone

  • Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter FEP Tubing Sleeves

    Our FEP tubing sleeves are an excellent choice for lower pressure applications. These 1.6 inches long sleeves facilitate connecting capillary tubing into ports designed for 1/32 inches outer diameter tubing. We offer a wide selection of appropriat…

    Our FEP tubing sleeves are an excellent choice for lower pressure applications. These 1.6 inches long sleeves facilitate connecting capillary tubing into ports designed for 1/32 inches outer diameter tubing. We offer a wide selection of appropriate sleeve for your capillary outer diameter size. These sleeves can be used at up to 50 ºC and have a pressure rating of 1,750 psi (121 bar).

    Learn MoreDone

  • Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter PEEK Tubing Sleeves

    Our 1/32 inches outer diameter PEEK Tubing Sleeves is designed to be used with any fitting made for 1/32 inches outer diameter tubing when smaller tubing must be connected. It is 1.6 inches in length. Select the appropriate sleeve from the product…

    Our 1/32 inches outer diameter PEEK Tubing Sleeves is designed to be used with any fitting made for 1/32 inches outer diameter tubing when smaller tubing must be connected. It is 1.6 inches in length. Select the appropriate sleeve from the product listing for your capillary tubing OD size. The 1/32 inches outer diameter PEEK Tubing Sleeves have a maximum recommended temperature of 125 ºC and have a pressure rating of 5,000 psi (345 bar).

    Learn MoreDone

  • Kinesis Scientific Experts – Flow Paths

    Kinesis provides innovative solutions to the most demanding low and high pressure fluid path applications, HPLC and UHPLC as well as low pressure chromatography within the laboratory and the OEM environment.

    Kinesis provides innovative solutions to the most demanding low and high pressure fluid path applications, HPLC and UHPLC as well as low pressure chromatography within the laboratory and the OEM environment.

    Learn MoreDone

  • Kinesis Scientific Experts – Lamps & Spares

    Kinesis manufacture and distribute chromatography instrument spares and lamps under stringent ISO quality procedures, supplying to end-users, independent instrument service companies and through a worldwide network of distributors. 

    Kinesis manufacture and distribute chromatography instrument spares and lamps under stringent ISO quality procedures, supplying to end-users, independent instrument service companies and through a worldwide network of distributors. 

    Learn MoreDone

  • Malvern Panalytical Consumables for Zetasizer Series

    We offer original Malvern Zetasizer range of consumables to maintain your instrument and operations. By supplying consumables obtained directly from Malvern, we ensure that your instruments continue to run at optimum performance by minimizing down…

    We offer original Malvern Zetasizer range of consumables to maintain your instrument and operations. By supplying consumables obtained directly from Malvern, we ensure that your instruments continue to run at optimum performance by minimizing downtime. We supply an array of consumables for the Zetasizer range such as Nano, µV, Helix, and APS.

    Learn MoreDone

  • NEST – Cell Biology – Colored Inserts

    6 colored cap inserts for easy identification

    6 colored cap inserts for easy identification

    Learn MoreDone

  • Proveris Scientific – Accessories

    With the industry’s most complete selection of standard accessories, chances are we already have a holder that will fit your product. If not, we can build one for you, exactly tailored to your requirements.

    With the industry’s most complete selection of standard accessories, chances are we already have a holder that will fit your product. If not, we can build one for you, exactly tailored to your requirements.

    Learn MoreDone

  • SARTORIUS – Quickseal® Aseptic Disconnections

    Quickseal® — Reliable Aseptic Disconnection

    Quickseal® aseptic disconnectors simplify critical fluid management by making aseptic disconnection fast and secure. Quickseal

    Quickseal® — Reliable Aseptic Disconnection

    Quickseal® aseptic disconnectors simplify critical fluid management by making aseptic disconnection fast and secure. Quickseal® collars are available for an array of tubing materials covering the range of tube internal diameters from 1/8″ (3.2 mm) to 3/4″ (19.0 mm). Extensively tested, Quickseal® is ideally suited for most applications in biopharmaceutical, vaccine and cell and gene therapy production.

    Key Features

    1. Fast Disconnection Time Seal and disconnect in less than 5 seconds on a wide range of tube sizes and materials

    2. Intuitive Operation Disconnect in one step — just cut the collar. Simple operation reduces risk of error.

    3. Secure and Trusted Seal Testing validates that the aseptic seal is stronger than the tube, ensuring reliability.

    Learn MoreDone
About DKSH

Who We Are

Lab Solutions

Services

Business Lines

Commercial and Industrial Applications

Precision Machinery

Scientific Solutions

Semiconductor & Electronics

Order Online

LabShop

Delivering Growth – in Asia and Beyond

Follow Us

© DKSH International Ltd.  All Rights Reserved.

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test