Binder

The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this growth chamber to create constant lighting and temperature conditions.

Key Features

• Patented lighting system ensures homogeneous light distribution
• Flexible positioning of illumination cassettes, three different light spectra, individually selectable
• Integrated weekly program in real-time

Climate Chambers with Light for Ideal Growth Conditions

Climate chambers with light from BINDER provide the ideal growth conditions for plants and other organisms. Homogeneous light distribution encourages growth, as does the constant temperature inside the climate chambers. Natural growth conditions are replicated perfectly in the climate chambers in the KBW series from BINDER.

Alongside light in combination with a constant temperature, BINDER climate chambers with light also offer a state-of-the-art humidity control system. Air can flow uniformly within the units, even when they are fully loaded.

 

The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

Key Features

• Patented lighting system ensures homogeneous light distribution
• Flexible positioning of illumination cassettes, three different light spectra, individually selectable
• Pressure humidification with fast response times

Climate Chambers with Light and Humidity for Perfect Climate Simulation

Climate chambers with light and humidity from BINDER provide ideal growth conditions for plants and other organisms. The growth chambers in the KBWF series have been designed to allow light, humidity, and temperature to be set so as to simulate natural conditions. The temperature can be adjusted with the accuracy of a tenth of a degree between the range of 0 °C to 70 °C, while the humidity can be displayed accurately at increments of a tenth of a percent. The humidification and dehumidification system is controlled by a reliable microprocessor and humidity is regulated with a capacitive humidity sensor and steam humidification. Extensive program controls allow climate conditions to be simulated constantly and very accurately, even over extended periods of time.

 

The BINDER FDL 115 with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents and thus this safety drying oven meets all EN 1539 requirements.

Benefits

• Safety concept meets the DIN EN 1539-2010-08 standard
• Short drying time with high temperature accuracy and defined ventilation
• Silicone free and dust-free inner chamber
• Replaceable fresh air cartridges are easy to change and ensure constant fresh air quality

Drying Chambers for Limited Quantities of Solvent

BINDER safety drying chambers are extremely accurate and ensure that drying is quick and even. With the option of operation at temperatures ranging up to 350 °C, these drying chambers can meet different requirements and are suitable for a wide range of applications. In its FDL series, BINDER has developed drying chambers for limited quantities of solvent, which provide the ideal environment for all samples containing solvents.

The FDL series includes drying chambers with a highly efficient filter cartridge and symmetrical air flow with defined flow rates. The cartridge can be replaced, guaranteeing high levels of operational safety along with the electronic fresh air monitoring system. The drying chambers operate with absolute temperature accuracy, even with high ventilation, thereby providing the basis for high-quality results and reproducible tests. The patented APT.line™ preheating chamber technology ensures that temperature distribution is homogeneous inside the drying chambers and test conditions are consistent across the entire usable space, regardless of the amount or size of the sample.

 

With the B series incubator, you get a reliable and powerful unit in a solid configuration at a very attractive price.

Benefits

• Safe and reproducible results even under high batch throughputs in long-term operation
• Inner glass door for a stable atmosphere

Incubator with Mechanical Adjustment for Optimum Incubation

The BINDER B series features incubators with mechanical adjustment. The high quality standards and technical equipment make these incubators a fantastic solution for stable incubation processes, allowing optimum incubation of microbiological cultures and delivering reproducible results even under high batch throughputs in long-term operation.

The BINDER incubator with mechanical adjustment operates within a temperature range that can be set between 30 °C and 70 °C, and the chamber is fitted with a hydraulic/mechanical thermostat and two chrome-plated racks. The incubator inner door is made from tempered safety glass, guaranteeing a stable atmosphere.

 

The BD Avantgarde.Line series is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media. The new design of the units and the homogeneous temperature distribution ensure the very best results.

Benefits

• Excellent temporal and spatial temperature accuracy
• High process reliability
• 100 °C disinfection routine

Incubator with Natural Convection from BINDER

If you are looking for stable incubation processes guaranteed, you need look no further than incubators from BINDER. Series BD incubators function with natural convection and, thanks to their state-of-the-art technical equipment, are a reliable choice for the incubation of microbiological cultures.

This BINDER incubator with natural convection comes in a range of versions and sizes. Operating within a temperature range of between 5 °C and 100 °C, they are equipped with the proven APT.line™ preheating chamber technology and an adjustable exhaust air flap. The inner door is made from tempered safety glass, guaranteeing a stable atmosphere.

 

The BINDER incubator of the BD series with natural convection is the specialist in long-term and stable continuous operation. This incubator is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media or microbiological heating.

Benefits

• Safe and reproducible incubation even under high batch throughputs in long-term operation
• Disinfection routine at 100 °C
• Stable atmosphere by inner glass door

Incubator with Natural Convection from BINDER

If you are looking for stable incubation processes guaranteed, you need look no further than incubators from BINDER. Series BD incubators function with natural convection and, thanks to their state-of-the-art technical equipment, are a reliable choice for the incubation of microbiological cultures.

This BINDER incubator with natural convection comes in a range of versions and sizes. Operating within a temperature range of between 5 °C and 100 °C, they are equipped with the proven APT.line™ preheating chamber technology and an adjustable exhaust air flap. The inner door is made from tempered safety glass, guaranteeing a stable atmosphere.

 

The BINDER incubator of the BF Avantgarde.Line series with forced convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times.

Benefits

• Excellent temporal and spatial temperature accuracy
• High process reliability
• 100 °C disinfection routine

Incubators with Forced Convection for Challenging Incubation Tasks

BINDER offers incubators to suit different laboratory requirements. Alongside incubators with mechanical adjustment, the Classic.Line also includes incubators with natural convection and, in the BF series, incubators with forced convection, which guarantee quick temperature equalization through forced convection after the chamber door has been opened.

Operating within a temperature range of between 5 °C and 100 °C, these incubators with forced convection all have an adjustable exhaust air flap and the fan speed can be adjusted on an individual basis. The proven APT.line™ preheating chamber technology and the cooling system guarantee maximum precision and results that are reproducible in every laboratory test.

 

The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times.

Incubators with Forced Convection for Challenging Incubation Tasks

BINDER offers incubators to suit different laboratory requirements. Alongside incubators with mechanical adjustment, the Classic.Line also includes incubators with natural convection and, in the BF series, incubators with forced convection, which guarantee quick temperature equalization through forced convection after the chamber door has been opened.

Operating within a temperature range of between 5 °C and 100 °C, these incubators with forced convection all have an adjustable exhaust air flap and the fan speed can be adjusted on an individual basis. The proven APT.line™ preheating chamber technology and the cooling system guarantee maximum precision and results that are reproducible in every laboratory test.