All Products

Showing all 13 results

AMADA – Advanced Data Analysis Monitor – WM-100A
With an ever-increasing emphasis on accountability, AMADA WELD TECH’s WM-100A is the most advanced resistance welding monitoring system available from any manufacturer. Built in the USA, the WM-100A offers more of the information you need for re…

With an ever-increasing emphasis on accountability, AMADA WELD TECH’s WM-100A is the most advanced resistance welding monitoring system available from any manufacturer. Built in the USA, the WM-100A offers more of the information you need for resistance welding process development, production monitoring and data to support your ISO, and GMP and TQM requirements. Not only will it monitor what happens during the weld, but also before it is triggered, giving you a true 360-degree view of your welding process.

Learn More
AMADA – Capacitor Discharge – CD Series
The unit offers consistent welding output for repeatable process results, with ultrafast rise time for conductive material welding. Built in the USA, featuring fully controllable dual pulse output, the CD-A1000A provides pulse shaping with 4 discr…

The unit offers consistent welding output for repeatable process results, with ultrafast rise time for conductive material welding. Built in the USA, featuring fully controllable dual pulse output, the CD-A1000A provides pulse shaping with 4 discrete pulse lengths, programmable squeeze and hold times and adjustable pulse separation. Furthermore, the units offer the ability to set limits around a schedule to prevent bad welds and a built-in peak current indicator which indicates the last weld peak current.

Learn More
AMADA – DC Inverter Welding Power Supply, IPB-5000B-MU
The IPB-5000B-MU inverter spot welder delivers superior welding control for a wide range of microjoining applications. When paired with the ITB-780A6 transformer this unit is capable of a maximum output of 6000 Amps, making it ideal for most resis…

The IPB-5000B-MU inverter spot welder delivers superior welding control for a wide range of microjoining applications. When paired with the ITB-780A6 transformer this unit is capable of a maximum output of 6000 Amps, making it ideal for most resistive and conductive welding applications. It operates in constant current, voltage or power feedback modes and is also capable of welding in a combo mode (current and voltage) to address even the most challenging application or process conditions.

Key Features

• Control Modes – Optimum control modes for obtaining ideal weld quality and consistency can be chosen from; constant current control, constant voltage control, combination of constant current and constant voltage control, and constant power control.

• GOOD/NO GOOD determination – The comparator feature allows to set upper and lower limits around the measured value of up to four parameters; which are current, voltage, power and resistance. When those values reach out of the limits, an error signal or a caution signal alarms.

• Diplacement Measurement – Measures how much an electrode moves down because of material collapse during weld. Weld to displacement – stops welding when displacement value reaches the set value. Requires displacement sensor sold separately.

• Envelope – The envelope feature allows dynamic limits to be set around a monitored waveform to ensure the same resistance change occurs at the same rate for every weld.

Learn More
AMADA – DC Inverter Welding Power Supply, IS-300A
Formerly known as IS-300CR. Small enough to fit on a bench, the IS-300CA 300 amp MFDC welder is ideal for customers and integrators who require high output, but have limited production space.

The IS-300…
Formerly known as IS-300CR. Small enough to fit on a bench, the IS-300CA 300 amp MFDC welder is ideal for customers and integrators who require high output, but have limited production space.

The IS-300CA inverter spot welder offers a range of new and improved features including six control modes (primary limit, primary and secondary root mean square (RMS), secondary constant power, secondary voltage control, and fixed pulse) and .050-20 kA of power in 3 ranges. The low current ranges are ideal for small or fine applications.
- 300 amp primary output
- Built-in current, voltage, power, time and pulse monitor
- Primary short circuit protection
- Triple pulse weld profile: W1, W2, W3, up to 19 pulsations per weld segment
- I/O check screen
- 5-way cascade option using MA-650A
- Pre-weld check process tool
- RS232 or RS485 communications
- Compact design
Learn More
AMADA – DC Inverter Welding Power Supply, IS-800A/1400A
Precision waveform control ensures high quality welding!

Precision waveform control ensures high quality welding!

Learn More
AMADA – High Frequency Inverter – HF2
HF2 is a 2kHz, state-of-the-art high frequency inverter welding power supply used to join small parts at high speed. Built in the USA, the HF2 High Frequency Inverter Spot Welder, is a high speed digital adaptive feedback contro…
HF2 is a 2kHz, state-of-the-art high frequency inverter welding power supply used to join small parts at high speed. Built in the USA, the HF2 High Frequency Inverter Spot Welder, is a high speed digital adaptive feedback controls weld current, voltage, or power, providing better weld consistency as compared to traditional AC or CD technologies.

HF2 may be used in conjunction with one of our many weld heads as a single operator benchtop unit and is also well-suited for integration into semi or fully automated resistance welding systems.

Key Features
- High Frequency Inverter Welder DC Technology
- High Speed Feedback Control System for Weld Current, Voltage, or Power
- Graphical and Alpha-numeric User Interface
- Input/Output Communication Ports for Automation Integration
Learn More
AMADA – High Frequency Welding Control – HF-2500A/ HF-2700A
The HF-2500A high frequency inverter spot welder addresses the challenges of micro welding for a wide range of applications. Precise control of weld energy with high speed closed loop feedback and weld quality tools ensure high yields for the most…
The HF-2500A high frequency inverter spot welder addresses the challenges of micro welding for a wide range of applications. Precise control of weld energy with high speed closed loop feedback and weld quality tools ensure high yields for the most demanding welding applications. Built in the USA, the HF-2500A high frequency inverter spot welder may be used in conjunction with one of our many weld heads as a single operator benchtop resistance welder and is also well-suited for integration into semi or fully automated resistance welding systems.
- Constant current, voltage, and power modes
- Monitors energy and resistance
- 2400 A maximum
- 25 kHz feedback
- Active Part Conditioning (APC)
- Pre-Weld Check
- Weld to Limits
Learn More
AMADA – Linear DC Welding Controls – UB Series
Transistor direct current power supplies (also called “Linear DC”) produce much the same results as the high frequency inverter by using a high number of power transistors as the direct energy source. This technology provides clean, square wav…

Transistor direct current power supplies (also called “Linear DC”) produce much the same results as the high frequency inverter by using a high number of power transistors as the direct energy source. This technology provides clean, square wave forms with extremely fast rise time. Used primarily in constant voltage feedback control, transistor DC power supplies are effective in thin foils and fine wire welding applications and for extremely short welds.

The UB-4000A Linear DC welding control is ideal for applications which require exceptional control, fast rise times, and high quality throughput. UB-4000A requires only single phase input power and can output up to 4000 amps. Ultra-fast rise times permit short overall weld times, resulting in less part deformation and stronger welds. This is extremely important when welding heat sensitive parts such as battery cells or sensitive electronic devices.

UB-500A (5-500 amps), and UB-1500A (15- 1500 amps) are Linear DC controls with feedback modes designed to adapt to part and process variables. These power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB-500A’s precision low energy control.

Learn More
AMADA – MM-400A Desktop Resistance Weld Monitor
Measures Current, Force, Voltage, Time and displacement

MM-400A welding monitor enables operators to monitor and manage key welding variables that result in changes in weld heat such as current, voltage, time, force and dis…

Measures Current, Force, Voltage, Time and displacement

MM-400A welding monitor enables operators to monitor and manage key welding variables that result in changes in weld heat such as current, voltage, time, force and displacement. The compact unit supports a wide range of resistance welding technologies including AC, DC inverter, AC inverter, transistor and capacitive discharge. It features a simple and intuitive user interface and color touch panel display.

Learn More
AMADA – Pneumatic Active Welding System – OP-AWS3
Active Welding System 3 Pneumatic

Formerly known as AWS3.The OP-AWS3 Active Welding System combines pneumatic weld heads / weld pincers (F- and FP-series) with an inverter power supply (ISQ-series) all in…

Active Welding System 3 Pneumatic

Formerly known as AWS3.The OP-AWS3 Active Welding System combines pneumatic weld heads / weld pincers (F- and FP-series) with an inverter power supply (ISQ-series) all in one unique system. Its various interfaces make OP-AWS3 an easy to integrate system for automation. The complete system is an integrated solution providing process control, monitoring and quality analysis all in one.

OP-AWS3 is a fully integrated resistance spot welding solution providing process control, monitoring and quality analysis all in one. The system features an MFP motorized weld head or pincer head and an ISQ high frequency inverter power supply.

OP-AWS3 may be used alone as a benchtop system or easily integrates into an existing production line.

Learn More
AMADA – Transistor Welding Power Supplies
Fast rise time
AMADA Transistor-controlled welding power supplies have rise times 4.5 times faster than that of conventional* models. high quality welding can be accomplished in a short period of time on small work pieces.
Fast rise time
AMADA Transistor-controlled welding power supplies have rise times 4.5 times faster than that of conventional* models. high quality welding can be accomplished in a short period of time on small work pieces.
* Compared with conventional model MD-1500E

No welding transformer needed
The welding current is directly controlled with fast switching by transistor, so no welding transformer is required.

Built-in pre-check function
Applying current on the workpiece before the main current, it is possible to judge whether or not there is a workpiece set on the electrodes, and to evaluate the status of workpiece.

Polarity switchable type
This can eliminate the Peltier effect (polarity effect) and provide uniform nugget diameters on series welding.

Two-channel type
Two weld heads can be controlled by one power supply. It contributes to cost and space savings.

Learn More
AMADA – Welding Accessories
A successful resistance spot welding process generally requires a welding power supply, a spot welding head, and a weld monitor or weld checker. Selecting the right accessories for these critical components can enhance and improve your results, an…

A successful resistance spot welding process generally requires a welding power supply, a spot welding head, and a weld monitor or weld checker. Selecting the right accessories for these critical components can enhance and improve your results, and provide additional safety for your operators.

Learn More
AMADA – WR Series Resistance Welding Workstations
Combining a power supply, weld head, process monitor and workbench, the all-new WR Resistance Welding Workstations are designed to simplify welding tasks and maximize quality and reliability, while enhancing operator safety.
…
Combining a power supply, weld head, process monitor and workbench, the all-new WR Resistance Welding Workstations are designed to simplify welding tasks and maximize quality and reliability, while enhancing operator safety.

Key Features
- DC inverter technology with up to 60,000 A provided on the secondary
- “Cascade” feature to enable the use of one power supply with several workstations
- Integration with either an AMADA WELD TECH MH-1501 or KN-200A weld head
- Optional weld monitor
- Anti-tie-down buttons for safe operation
- Adjustable electrode speed
Learn More

AMADA – Advanced Data Analysis Monitor – WM-100A

AMADA – Capacitor Discharge – CD Series

AMADA – DC Inverter Welding Power Supply, IPB-5000B-MU

Key Features

AMADA – DC Inverter Welding Power Supply, IS-300A

AMADA – DC Inverter Welding Power Supply, IS-800A/1400A

AMADA – High Frequency Inverter – HF2

Key Features

AMADA – High Frequency Welding Control – HF-2500A/ HF-2700A

AMADA – Linear DC Welding Controls – UB Series

AMADA – MM-400A Desktop Resistance Weld Monitor

AMADA – Pneumatic Active Welding System – OP-AWS3

AMADA – Transistor Welding Power Supplies

AMADA – Welding Accessories

AMADA – WR Series Resistance Welding Workstations

Key Features

About DKSH

Business Lines

Order Online

All Products

Key Features

Key Features

Key Features

About DKSH

Business Lines

Order Online

Your download – just a few steps away