An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis), both versions are available in an acid-resistance configuration.

The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to four independent infrared cells for measuring carbon and sulfur concentrations, allowing for a great variety of applications.

Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in these materials.

The H-500 analyzer uses the heat extraction technique and is equipped with a resistance furnace with quartz tube. The temperature can be set up to 1000 °C in steps of 1 °C. The usual working range of the H-500 is about 900° to 1000° C. ELTRA’s H-500 can be customized to the requirements of the user. The analyzer carries up to two different sensitivities of the detectors to allow highest precision for a variety of applications.

CombiFoss™ 7 provides raw milk testing for 19 parameters in 6 seconds, including somatic cell count (SCC) and differential SCC. Seamless integration of MilkoScan™ 7 RM (FTIR) and Fossomatic™ 7 (flow cytometry) in one analysis unit.

Automated Dumas analysis for quality control in food and feed laboratories. Full control of your data with remote surveillance option.

The first fully automated fiber analysis solution following official reference methods. Lowest operator time of any fibre analysis solution. Official reference method results with unrivalled accuracy (ISO, AOAC). Safest fibre analysis solution available.

Fully automated acid hydrolysis system. Patented HydroCap™ – single use filter system. Reduced foot print and batch handling of 12 samples.

The FOSS Mill Collection consists of four models: the CM 290 Cemotec™, CT 293 Cyclotec™, KN 295 Knifetec™ and Hammertec™ for flexible and safe sample preparation.

The new ELEMENTRAC ONH-p 2 is a powerful and robust elemental analyzer for measurement of oxygen, nitrogen and hydrogen concentrations in inorganic materials like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal conductivity detectors reliably detect element concentrations from low ppm content to high percentages.