Idex – Low Pressure Multiport Connectors – Y Connectors
PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates less turbulence and thus can improve analytical results. All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings (to accommodate larger tubing).
Key Features
List of available Y Connectors
Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a “T” design. Unlike a “T” the geometry of the “Y” design reduces turbulence and improves analytical results.
List of available PEEK Y Connectors
| Material | Thread Port Configuration | Swept Volume | Thru hole | Pressure Rating Max | For tubing outer diameter |
| PEEK | 1/4-28 Flat-Bottom | 1.7 µL | 0.020 inches/0.50 mm | 1000 psi/69 bar | 1/16 inches |
| PEEK | 1/4-28 Flat-Bottom | 6 µL | 0.040 inches/1 mm | 500 psi/34 bar | 1/8 inches |
| PEEK | 1/4-28 Flat-Bottom | 13.6 µL | 0.060 inches/1.50 mm | 500 psi/34 bar | 1/8 inches |
| PEEK | 1/4-28 Flat-Bottom | 47.7 µL | 0.125 inches/3.20 mm | 500 psi/34 bar | 3/16 inches |
Key Industries
- Biopharmaceutical and Biotechnology
- Chemical
- Cosmetics & Personal Care
- Education & Academics
- Food & Beverage
- Medical
- Oil & Gas
- Pharmaceutical
- Powders & Pigments / Coating
IDEX Health & Science is the global authority in fluidics and optics, bringing life to advanced optofluidic technologies with our…
