Product Search - All Products

Showing 193–216 of 811 results

Ebro – Food Oil Monitor – FOM 330
The ebro® food oil monitoring set comes with a handy sensing device with which you can determine the quality of various oil types. The measurement is performed directly in hot oil – e.g in the deep fat fryer. This helps in determining the o…

The ebro® food oil monitoring set comes with a handy sensing device with which you can determine the quality of various oil types. The measurement is performed directly in hot oil – e.g in the deep fat fryer. This helps in determining the oil temperature in ̊C and the oil quality in percent TPC (Total Polar Compounds). The PC value is a measure for thermaloxidative utilization factor of a frying oil.

Learn More
Ebro – Infrared Thermometers – TFI 260
The TFI 260 is perfect for fast food inspection of food. The bright background lighting of the display makes it possible to read the measured values even in the dark. The antislip handle and trigger for the measurement are optim…

The TFI 260 is perfect for fast food inspection of food. The bright background lighting of the display makes it possible to read the measured values even in the dark. The antislip handle and trigger for the measurement are optimal for the application.

Portability and rapidity are the two most important features of the infrared thermometer TFI 260 by ebro^®. In less than one second, the device measures the surface temperature of objects or goods – for example food – within a measuring range of -60 °C to +550 °C. Direct contact is not necessary, so the hand-held device can obtain exact results even from a distance. The infrared thermometer is therefore ideal for fast and smooth checks of incoming and outgoing goods, and is suitable for other applications.

Learn More
Ebro – Precision Data Loggers – EBI 100
The precision data loggers are available in different versions including temperature or temperature / pressure loggers with and without external probes. They record the temperature and pressure variation over time during the washer-disinfector or …

The precision data loggers are available in different versions including temperature or temperature / pressure loggers with and without external probes. They record the temperature and pressure variation over time during the washer-disinfector or sterilizer process and can easily be read out on a computer using the Winlog.med software. This software will make the test evaluation easy, and automatically calculates the A0 value.

Learn More
Ebro – Thermometers – TTX Series
The ebro® product range includes a large number of thermometers for many different purposes. It includes core thermometers with fixed sensors or sensors connected by means of a cable, conformity-assessed laboratory thermometers for high-precision…

The ebro® product range includes a large number of thermometers for many different purposes. It includes core thermometers with fixed sensors or sensors connected by means of a cable, conformity-assessed laboratory thermometers for high-precision temperature monitoring, as required for food inspection purposes, contact thermometers and reference thermometers.

Learn More
ECD – Continuous Monitoring – OvenSENTINEL™
OvenSENTINEL™, the latest continuous monitoring solution from ECD, sets the new standard in reflow process monitoring and product traceability. OvenSENTINEL leapfrogs competitor product to deliver unmatched measurement and vis…

OvenSENTINEL™, the latest continuous monitoring solution from ECD, sets the new standard in reflow process monitoring and product traceability. OvenSENTINEL leapfrogs competitor product to deliver unmatched measurement and visibility – down to the board and profile specification level – isolating and analyzing potentially damaging process variations.

Learn More
ECD – Dry Storasge
SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-03…

SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-033 while preventing electrostatic discharge (ESD) using durable electrically conductive powder paint surfaces over steel construction.

Learn More
ECD – Machine Quality Management
Machine Quality Management (MQM) tools ensure soldering equipment – whether reflow, wave, or selective – is performing to specifications. Keeping a machine operating within its set tolerances sets a good foundation for product quality and high…

Machine Quality Management (MQM) tools ensure soldering equipment – whether reflow, wave, or selective – is performing to specifications. Keeping a machine operating within its set tolerances sets a good foundation for product quality and high-yield operations. ECD MQM pallets use the M.O.L.E. thermal profiler as the data collection device, enabling the use of one data acquisition system that can be used across soldering equipment platforms.

Learn More
ECD – Thermal Profiling
Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transfo…

Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transformation experience, which is then analyzed to optimize complex process settings and conditions to ensure quality results.

A pioneer in the design of the traveling thermal profiler, ECD has developed a suite of thermal data logging products that serve the electronics, baking, industrial and solar industries, among others.

Learn More
ECD – Thermal Profiling – MEGAM.O.L.E.™ 20
Do you demand the highest density of thermocouple placement possible on your Hi-Reliability, High-Value PCB? ECD’s got your Spec! Do you expect a software package that flexes with your workflow, providing customizable data ext…

Do you demand the highest density of thermocouple placement possible on your Hi-Reliability, High-Value PCB? ECD’s got your Spec! Do you expect a software package that flexes with your workflow, providing customizable data extractions, Imports of your .MDM M.O.L.E. libraries and compatibility with your intranet, Excel, and all ECD M.O.L.E.™ Profilers?

Learn More
ECD – Thermal Profiling – V-M.O.L.E.™ Series
The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration. Ideal for VERIFICATION of PCB profile performance, 3 channels give you Hot…

The V-M.O.L.E.™ is a full-featured compact thermal profiler that belies its sophistication in an easy-to-use 3-channel Mini-thermocouple configuration. Ideal for VERIFICATION of PCB profile performance, 3 channels give you Hot, Cold and Sensitive component data for verifying the correct oven settings.

Learn More
Ecoclean – Aqueous Cleaning Solutions
Today environmentally friendly aqueous cleaning has taken on the most important role for the intermediate and final cleaning of parts. They tend to be preferred if a large quantity has to be cleaned and/or fine and finest cleaning has to be carrie…

Today environmentally friendly aqueous cleaning has taken on the most important role for the intermediate and final cleaning of parts. They tend to be preferred if a large quantity has to be cleaned and/or fine and finest cleaning has to be carried out.

Learn More
Ecoclean – Solvent Cleaning Solutions
A common cleaning media for wet-chemical processes are solvents.

Depending on the targetted cleanliness, the material compatibility and the nature of the contamination that has to be cleaned off either …

A common cleaning media for wet-chemical processes are solvents.

Depending on the targetted cleanliness, the material compatibility and the nature of the contamination that has to be cleaned off either (non-halogenated) hydrocarbons, chlorinated solvents or polar solvents may be selected.

Learn More
EIT – LED Instruments
The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our paten…

The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our patented Total Measured Optic Response in which ALL optics in the instrument are included in the instrument response result in better performance and repeatability; unit-to-unit, run-to-run and source-to-source.

Learn More
EIT – Online Monitoring
Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access ea…

Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access each lamp (multi-lamp bank and/or elevated). The feedback is relative and looks at the relative output over time. Online Monitoring will identify both gradual (aging lamps) or sudden (equipment malfunction, user changed parameters) changes in the intensity.

Learn More
EIT – UV Broadband Instruments
Radiometers provided calibrated irradiance (W/cm²) and energy density values (J/cm²) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm² as a function of time) which is useful to …

Radiometers provided calibrated irradiance (W/cm²) and energy density values (J/cm²) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm² as a function of time) which is useful to further understand the UV conditions and compare UV systems.

Learn More
Escomatic – CNC – D2/D5 CNC
The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

Learn More
Escomatic – CNC – D2/D5 Flex Speed
Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end …

Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end working unit with two spindles for drilling operations.

Learn More
Escomatic – CNC – D5 Twin
The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (se…

The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (set of straightening dies and holders, feed rollers and turning tools) are compatible with these machines.

Learn More
Escomatic – CNC – D5 Ultra
The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of th…

The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of the part. On the front side drilling, tapping and threading is possible with three axially positioned spindles. After the cut-off of the part the back side can be machined simultaneously to the front side spindles and/or the turning operation by means of two axially and one laterally positioned spindles. With a tool head speed of 12‘000 min-1 and 18‘000 min-1 for the front and back working spindles this new machine offers the turning performance of a D2 CNC with ultra-performing secondary machining operations.

Learn More
Escomatic – CNC – NM6 Flexi
Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5…

Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5 TWIN) and the EC (escomatic EC 8). It will succeed the New Mach 64x range which has held a successful position for many years.

Learn More
Escomatic – CNC – NM8 Flexi
The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

Thanks to the new design and to the use of two completely independen…

The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

Thanks to the new design and to the use of two completely independent cross tables for the front and back machining units, the NM8 Flexi breaks the limits of flexibility and performance. Two parts can be manufactured at the same time: one part machined in the turning and front machining unit while the second part positioned in the counter spindle is undergoing back and side operations.

Learn More
Escomatic – D2/D5 CNC
The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

Learn More
Escomatic – EC8
The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four…

The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four-tool chuck, two of which can work simultaneously, with up to 12 pick-up tools, this new cutting machine allows the use of cutting tools in the form of standard commercial pads.

Learn More
Essemtec – Dispensing
Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no sta…

Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no standard application in dispensing.

Learn More