Escomatic – CNC – D2/D5 Flex Speed


    Kelvin Low, Senior Manager

    DKSH Singapore Pte Ltd
    625 Lorong 4 Toa Payoh, #03-00
    319519 Singapore

    +65 6274 1222

    +65 6273 1503


Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end working unit with two spindles for drilling operations.

The ESCO FLEX SPEED system allows machining to be optimised while guaranteeing an extremely high level of productivity. This increases the performance advantages of cam driven machines. Thanks to the electronic control system, the speed of the cam shaft can be programmed for specific areas. For example, the feed rate can be reduced for parting and increased for turning; this means that the slowest process no longer determines the overall cycle time. In addition the spindle speeds and the straightening speeds can be continuously adjusted (no more changing of pulleys). Due to FLEX SPEED the parameter of each operation can be optimised individually, resulting in a significant improvement in the quality of the parts produced.

Technical Specifications

Maximum toolhead capacity5 mm
Maximum stroke length80 mm
Amount of cutting tools2
Toolhead rotation speed, continuously variable4000/8000 min-1
Straightener rotation speed, continuously variable4000/8000 min-1
Cam shaft rotation speed programmable per section of degrees1/100 min-1
Weight1050 kg
Floor-space (W x L)1560 x 1000 mm

Key Features

  • Cam controlled machine with electronic Flex Speed system (Fanuc) for optimised cycles, higher precision and less tool wear
  • Machining of one part with additional  pre- or post operations
  • Front end machining (cantering, drilling) with 2 tools on the D5 Flex Speed
  • Lower material costs due to less waste of material ends
  • Reduction of labour costs due to fewer machine stops by using material from coil, real 24h operation
  • Economy of floor space due to compact design of the unit “machine & coil stand”
  • Efficient and economical production of simple serial parts with short cycle times

Key Industries

  • Aerospace
  • Automotive
  • Machinery & Manufacturing
  • Energy
  • Semiconductor, Solar & Electronics


ESCO (Escomatic)

For over 60 years, the ESCO company has been dedicated to and specialized in the development and manufacturing of automatic and numerically-controlled lathes used for the production of small diameter parts ranging from 0.30 to 8.00 mm. Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools are mounted onto the tool head which rotates around the material to produce the components. ESCO SA is represented by Agents or Distributors experienced on Escomatic products in more than 20 countries.

Similar Products

test block for Laos

Your download – just a few steps away

Please enter your details here: