Tested and certified independently by TÜV-SÜD: LABEX®-Laboratory Freezers with re-circulating air cooling are intrinsically safe according to the ATEX 95 directive. Each component in the interior compartment (ventilators, sensors) is particularly shielded to avoid sparks even when malfunction occur. Your advantage: Complete explosion-proofing and maximum temperature consistency.

Eluent Delivery

The UHPLC Pump P 6.1L with LPG configuration has a new LPG valve for precise mixing efficiency of up to four eluents at up to 1000 bar. The integrated degasser prevents air bubbles in the system. A mixing chamber is mounted on each Pump P 6.1L. This can be adapted to the respective application as required.

Sample Injection

The Autosampler 6.1L can inject 0.1 – 5000 µl to have a large flexibility. Using standard vials or two microtiter plates will give you a maximum sample capacity of up to 768 samples or 108 vials. The UHPLC version can be used up to 1240 bar system backpressure.

Column Thermostating

The Column thermostat CT 2.1 is suitable for column thermostatization above and below room temperature. The instrument operates with a microprocessor controlled Peltier element for exact temperature settings.

Chromatography Data System

KNAUER ClarityChrom^® is a powerful, yet easy-to-use chromatography software for instrument control, data acquisition and data processing. It is an economical solution compared to other more complex chromatography software while still offering FDA 21 CFR Part 11 compliance.

Detection

The diode array detector DAD 6.1L covers all conceivable applications with a spectral range of 190-1000 nm. With its novel light path and optimized flow cells, it is one of the most powerful devices on the market.

KNAUER freezing point osmometer K-7400S allows the easy and fast determination of the osmolality of various aqueous solutions. Also, the freezing point depression of the samples can be read. The proven technology of freezing point determination in combination with the robust and intelligent design of the device allows reproducible measurements. The instrument is equipped with a peltier cooler and an integrated microprocessor controlling the automated measurement. The freezing point osmometer is a standalone device that optionally can be equipped with a printer. Furthermore, the device can be controlled via the EuroOsmo 7400 software. The software automatically plots the temperature curve for each measurement and calibration and allows saving of the measured values. In addition, the data can optionally be exported into various file formats for archival storage.

The measurement specifications of the KNAUER Semi-Micro Osmometer K-7400S comply with the requirements of the European Pharmacopoeia for osmolality (Ph. Eur. 2.2.35, 10/2021) in the pharmaceutically relevant range of 0-400 mOsmol/kg.

The Diaphragm Vacuum Pump is a chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. 

Covers the Assessment of the wear aspects of the boundary lubrication properties of aviation turbine fuels on rubbing steel surfaces. The test ball is pressed with a force of 10 N against the test ring. The test ring is made to rotate at 240 RPM for a period of 30 minutes after which the test stops. 

The Grease Noise Tester evaluates the lubrication integrity of greases, providing a quantitative assessment of the noise characteristics of the grease. The use of clean lubricants is essential for obtaining long bearing life. A clean grease for initial lubrication as well as re-lubrication are essential to ensure machine longevity. In applications where bearing fatigue life is not critical such as low operating loads, a clean grease is essential to ensure low bearing noise required for many electric motor applications.

Evaluates the shear stability of polymer-containing fluids. The test method measures the percent viscosity loss (and mm2/s for test method D7109) at 100°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector test equipment.

KUBOTA Is a Leading Laboratory Centrifuge Manufacturing Company in Japan

Each centrifuge model meets specific requirements. KUBOTA offering a broad range of high-quality centrifuges since 1920, with an established reputation for reliable performance. All centrifuges are made in Japan and pass rigorous company testing.

KUBOTA manufactures its products at the factory in Fujioka, which has become ISO9001 certified since 1996, and distributes through ten sales branches covering the whole area of Japan. In addition, KUBOTA collaborate with more than twenty distributors in over fifteen countries. KUBOTA has been building a constructive and win-win relationship with these companies..