Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.
Filter
Showing 49–72 of 257 results
ColdBlock™ Sample Digestion System is the first sample digestion technology using focused short-wave infrared (IR) radiation and a ColdBlock, which delivers exceptional performance even in difficult matrices.
ColdBlock™ Sample Digestion System is the first sample digestion technology using focused short-wave infrared (IR) radiation and a ColdBlock, which delivers exceptional performance even in difficult matrices.
MobileClean™ brings precision cleaning exactly where it’s needed. CO2 integrated spray cleaning is powerful yet selective. Apply it only where needed to jet away oils, films and particulate matter.
MobileClean™ brings precision cleaning exactly where it’s needed. CO2 integrated spray cleaning is powerful yet selective. Apply it only where needed to jet away oils, films and particulate matter.
Our patented technology allows the operator to dial in the hardness and impact velocity of the CO2 spray particles for aggressive or mild cleaning action.
MobileClean™ is equipped with a convenient spray wand and optional on-board HEPA filtered vacuum. Simply roll up the MobileClean™, plug it in and clean.
A prodigy that’s taking flow cytometry to the next level of performance and flexibility
The Cytek Aurora leverages full spectrum technology to provide unprecedented flexibility to sci…
A prodigy that’s taking flow cytometry to the next level of performance and flexibility
The Cytek Aurora leverages full spectrum technology to provide unprecedented flexibility to scientists, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The Aurora system delivers high-resolution data at the single-cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity.
The Cytek Aurora CS was designed to leverage the paradigm-shifting technology onboard the Cytek Aurora system and deliver the sorting capabilities you have come to expect in a high-end sorter.
Like Auro…
The Cytek Aurora CS was designed to leverage the paradigm-shifting technology onboard the Cytek Aurora system and deliver the sorting capabilities you have come to expect in a high-end sorter.
Like Aurora, the CS provides the benefits of Full Spectrum Profiling (FSP™) technology. Its optical design and unmixing algorithm provide scientists remarkable flexibility, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The state-of-the-art optics and low-noise electronics provide high-resolution, high-content and high sensitivity.
The result is a system that delivers high resolution at the single cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity, and to isolate live cells for downstream studies.
The Cytek Northern Lights is a full spectrum flow cytometer that shifts the paradigm in what scientists expect to see in performance from an affordable one-to-three laser system.
The Cytek Northern Lights is a full spectrum flow cytometer that shifts the paradigm in what scientists expect to see in performance from an affordable one-to-three laser system.
SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-03…
SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-033 while preventing electrostatic discharge (ESD) using durable electrically conductive powder paint surfaces over steel construction.
The FL5 + RDC is a high productivity printing and converting machine for cartons, scratch cards and labels where there are infrequent job changes.
The fully servo driven system allows f…
The FL5 + RDC is a high productivity printing and converting machine for cartons, scratch cards and labels where there are infrequent job changes.
The fully servo driven system allows for easy and repeatable setups in both the printing and converting sections. The rotary die-cutting technology (RDC enables high speed production of both sheets and die-cut product whilst maintaining the versatility of a one pass production). It comes in 600mm web width as standard.
This flexibility means that the FL5 + RDC can be configured for a wide range of applications such as: single pass cartons, single pass scratch cards, paper cups, sleeves and much more. Single pass production significantly reduces work in progress, number of operators, space requirement, waste and delivery times whilst also increasing overall efficiency of traditional multi pass production methods.
The Digicon 3000 is a versatile 30″ | 762mm digital print finishing solution for labels and flexible packaging, designed to complement the HP Indigo 25000 Digital Press. It caters to the demand for shorter runs, faster tur…
The Digicon 3000 is a versatile 30″ | 762mm digital print finishing solution for labels and flexible packaging, designed to complement the HP Indigo 25000 Digital Press. It caters to the demand for shorter runs, faster turnarounds, and diverse SKU labeling and packaging.
Unlike typical packaging digital print finishing equipment, it offers multifunctionality, allowing various finishing and converting operations. Developed through a partnership between AB Graphic International and Edale, it leverages their expertise in digital print finishing, flexographic print, web transportation, and post-print converting.
The Edale FL1 PRIME single-pass label printer offers high productivity and quality label printing, driven by servo technology for efficiency. It’s designed for quick setup and minimal waste generation, with full modularity…
The Edale FL1 PRIME single-pass label printer offers high productivity and quality label printing, driven by servo technology for efficiency. It’s designed for quick setup and minimal waste generation, with full modularity to accommodate future growth.
This machine is an excellent replacement for older mechanical presses in the narrow web printing market and an ideal starting point for new ventures. Built upon the foundation of the FL3 and Edale’s 75 years of experience, it delivers reliable and high-quality results with servo-driven technology and the renowned Uniprint printhead design.
The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our paten…
The spectral output from an UV LED source is narrow or monochromatic when compared to broadband (mercury) source. Each of EIT 2.0 LLC’s L-Bands (L-365, L-385, L-395 and L-405) has an optic response and dynamic range optimized for LEDs. Our patented Total Measured Optic Response in which ALL optics in the instrument are included in the instrument response result in better performance and repeatability; unit-to-unit, run-to-run and source-to-source.
Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access ea…
Online Monitoring allows users to continuously monitor and track a UV source. This is useful in applications where a radiometer will not fit, where high value and/or high production speeds are used and when it is not practical or easy to access each lamp (multi-lamp bank and/or elevated). The feedback is relative and looks at the relative output over time. Online Monitoring will identify both gradual (aging lamps) or sudden (equipment malfunction, user changed parameters) changes in the intensity.
Radiometers provided calibrated irradiance (W/cm2) and energy density values (J/cm2) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm2 as a function of time) which is useful to …
Radiometers provided calibrated irradiance (W/cm2) and energy density values (J/cm2) in one to four bands. Profiling Radiometers also provide the irradiance profile (W/cm2 as a function of time) which is useful to further understand the UV conditions and compare UV systems.
An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis),…
An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis), both versions are available in an acid-resistance configuration.
The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to four independent infrared cells for measuring carbon and sulfur concentrations, allowing for a great variety of applications.
Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analy…
Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be equipped with up to four independent infrared cells according to the user‘s requirements, allowing for a great variety of applications.
The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and su…
The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and sulfur dioxide.
The high temperature of more than 2000 °C ensures complete decomposition of the sample and thus reliable and accurate elemental analysis over a wide concentration range.
The ELEMENTRAC CS-i meets and exceeds the requirements of all common standards for carbon and sulfur measurement, such as ASTM E1019, DIN EN ISO 15350.
Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in t…
Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in these materials.
The H-500 analyzer uses the heat extraction technique and is equipped with a resistance furnace with quartz tube. The temperature can be set up to 1000 °C in steps of 1 °C. The usual working range of the H-500 is about 900° to 1000° C. ELTRA’s H-500 can be customized to the requirements of the user. The analyzer carries up to two different sensitivities of the detectors to allow highest precision for a variety of applications.
ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simu…
ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simultaneously analyzes up to 19 samples with sample weights up to 5 g and can be operated at temperatures up to 1000 °C.
A special feature of the TGA Thermostep is the management of crucible covers. The thermogravimetric analyzer can place and remove the covers of the crucibles during analysis. This feature allows for example the precise determination of volatile content in coal and coke.
Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no sta…
Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no standard application in dispensing.
Designed for even more product changes per day, an even bigger range of components, increasing requirements for placement accuracy, speed and availability combined with high quality – naturally adaptive – engineering.
Designed for even more product changes per day, an even bigger range of components, increasing requirements for placement accuracy, speed and availability combined with high quality – naturally adaptive – engineering.
The A6000 is a hardware/software system designed to assist in-line SMT production and find missing components, component errors, polarity errors, and rotation and offset faults. It is intended to minimize machine errors and human errors before the…
The A6000 is a hardware/software system designed to assist in-line SMT production and find missing components, component errors, polarity errors, and rotation and offset faults. It is intended to minimize machine errors and human errors before they multiply in production. The hardware part includes a chassis carrying an XY axis system equipped with a camera producing high quality images and capable of inspecting all types of electronic components in top view, up to chip 01005 format. By automatically comparing a sample or the entire production, ExtraEye reduces operator fatigue and helps maintain stable and compliant production.
ExtraEye is a hardware/software system designed to assist operators of all levels in the FAI production head validation process.The hardware part includes a chassis with motorized X/Y axes carrying a camera producing high qualit…
ExtraEye is a hardware/software system designed to assist operators of all levels in the FAI production head validation process.The hardware part includes a chassis with motorized X/Y axes carrying a camera producing high quality images and capable of inspecting any type of component in top view up to chip 01005 format. By presenting an image of the assembled components in relation to BOM details as well as assembly drawings, ExtraEye significantly improves inspection speed, reduces operator fatigue and therefore provides accuracy of 100% inspection.
Access to energy, particularly cleaner energy, is fundamental to human progress. The majority of the world’s energy poor lives in Asia, Pacific and Africa. Many with access to power use diesel generators!
Access to energy, particularly cleaner energy, is fundamental to human progress. The majority of the world’s energy poor lives in Asia, Pacific and Africa. Many with access to power use diesel generators!
What is the solution? – cost-effective smart microgrid embracing wind, solar and battery.
The sets can be moved in standard containers to any location on the globe and set up for operation within short time to provide environmentally friendly produced energy at no grid cost wherever it is needed.
FoxSign fully understands that our success is attributable to our customers and the society to which we all belong. As a global citizen, FoxSign is determined to make significant contributions to society various accessible proce…
FoxSign fully understands that our success is attributable to our customers and the society to which we all belong. As a global citizen, FoxSign is determined to make significant contributions to society various accessible process equipments through the experiences and technical abilities we already have.
The GAR1200 is an in-line router machine specially designed to route (depanelize) large panels with PCB size up to 350mm x 310mm into individual units. It is a fast, space-saving, and accurate machine designed for high volume production with minim…
The GAR1200 is an in-line router machine specially designed to route (depanelize) large panels with PCB size up to 350mm x 310mm into individual units. It is a fast, space-saving, and accurate machine designed for high volume production with minimal operator participation.
It has two worktables. While one of the worktables is in high-speed routing operation, the other worktable works with the robotic P&P module to unload boards and load the new PCB panel.
© DKSH International Ltd. All Rights Reserved.
test block for Laos
Contact us
Please enter your details here:
test
