All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filters
Search
  • Select Business Lines first
  • Select Business Lines first

Showing 505–528 of 1864 results

  • Elma – Ultrasonic Cleaners – Elmasonic S

    Elmasonic S ultrasonic devices are available in 16 different sizes ranging from 0.8 to 90.0 litres maximum filling volume. They are equipped with an ultrasonic frequency of 37 kHz, functions like Sweep, Degas and Auto-Start and …

    Elmasonic S ultrasonic devices are available in 16 different sizes ranging from 0.8 to 90.0 litres maximum filling volume. They are equipped with an ultrasonic frequency of 37 kHz, functions like Sweep, Degas and Auto-Start and thus very versatile.

    The clearly arranged control panel is user friendly designed and splash-water protected. The cleaning process can be supported by an optional selectable, run-dry-proven heating. Furthermore Elmasonic S devices are very user-safe and shut down after 12 hrs. of operation.

  • Elma – Ultrasonic Cleaners – Elmasonic X-tra Basic

    Robust and powerful ultrasonic cleaning unit for industry and work shop. The Elmasonic X-tra basic series comprises 6 different unit sizes (300, 550, 800, 1200, 1600 and 2500). All units are equipped with multi-frequency (25/45 kHz, switchable), b…

    Robust and powerful ultrasonic cleaning unit for industry and work shop. The Elmasonic X-tra basic series comprises 6 different unit sizes (300, 550, 800, 1200, 1600 and 2500). All units are equipped with multi-frequency (25/45 kHz, switchable), bottom sound and heating.

  • Eltra – Carbon/Hydrogen/Sulfur Analyzer – CHS-580

    An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis),…

    An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis), both versions are available in an acid-resistance configuration.

    The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to four independent infrared cells for measuring carbon and sulfur concentrations, allowing for a great variety of applications.

  • Eltra – Carbon/Sulfur Analyzer – CS-580

    Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analy…

    Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be equipped with up to four independent infrared cells according to the user‘s requirements, allowing for a great variety of applications.

  • Eltra – Carbon/Sulfur Analyzer – ELEMENTRAC CS-i

    The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and su…

    The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and sulfur dioxide.

    The high temperature of more than 2000 °C ensures complete decomposition of the sample and thus reliable and accurate elemental analysis over a wide concentration range.

    The ELEMENTRAC CS-i meets and exceeds the requirements of all common standards for carbon and sulfur measurement, such as ASTM E1019, DIN EN ISO 15350.

  • Eltra – Hydrogen Analyzer – H-500

    Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in t…

    Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in these materials.

    The H-500 analyzer uses the heat extraction technique and is equipped with a resistance furnace with quartz tube. The temperature can be set up to 1000 °C in steps of 1 °C. The usual working range of the H-500 is about 900° to 1000° C. ELTRA’s H-500 can be customized to the requirements of the user. The analyzer carries up to two different sensitivities of the detectors to allow highest precision for a variety of applications.

  • Eltra – Thermogravimetric Analyzer – TGA Thermostep

    ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simu…

    ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simultaneously analyzes up to 19 samples with sample weights up to 5 g and can be operated at temperatures up to 1000 °C.

    A special feature of the TGA Thermostep is the management of crucible covers. The thermogravimetric analyzer can place and remove the covers of the crucibles during analysis. This feature allows for example the precise determination of volatile content in coal and coke.

  • Escomatic – CNC – D2/D5 CNC

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

  • Escomatic – CNC – D2/D5 Flex Speed

    Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end …

    Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end working unit with two spindles for drilling operations.

  • Escomatic – CNC – D5 Twin

    The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

    The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (se…

    The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

    The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (set of straightening dies and holders, feed rollers and turning tools) are compatible with these machines.

  • Escomatic – CNC – D5 Ultra

    The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of th…

    The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of the part. On the front side drilling, tapping and threading is possible with three axially positioned spindles. After the cut-off of the part the back side can be machined simultaneously to the front side spindles and/or the turning operation by means of two axially and one laterally positioned spindles. With a tool head speed of 12‘000 min-1 and 18‘000 min-1 for the front and back working spindles this new machine offers the turning performance of a D2 CNC with ultra-performing secondary machining operations.

  • Escomatic – CNC – NM6 Flexi

    Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5…

    Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5 TWIN) and the EC (escomatic EC 8). It will succeed the New Mach 64x range which has held a successful position for many years.

  • Escomatic – CNC – NM8 Flexi

    The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

    Thanks to the new design and to the use of two completely independen…

    The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

    Thanks to the new design and to the use of two completely independent cross tables for the front and back machining units, the NM8 Flexi breaks the limits of flexibility and performance. Two parts can be manufactured at the same time: one part machined in the turning and front machining unit while the second part positioned in the counter spindle is undergoing back and side operations.

  • Escomatic – D2/D5 CNC

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

  • Escomatic EC8

    The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four…

    The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four-tool chuck, two of which can work simultaneously, with up to 12 pick-up tools, this new cutting machine allows the use of cutting tools in the form of standard commercial pads.

  • Essemtec – Dispensing

    Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no sta…

    Equipped with the most modern, accurate systems that drive and steering technology offers today. Mediums rarely behave the same way, environmental conditions are significant for the behavior of liquid changes. This is why there is virtually no standard application in dispensing.

  • Essemtec – Pick-and-Place

    Designed for even more product changes per day, an even bigger range of components, increasing requirements for placement accuracy, speed and availability combined with high quality – naturally adaptive – engineering.

    Designed for even more product changes per day, an even bigger range of components, increasing requirements for placement accuracy, speed and availability combined with high quality – naturally adaptive – engineering.

  • EVALED® evaporators

    EVALED® evaporators are industrial systems accelerating the natural evaporation process.

    EVALED® evaporators are industrial systems accelerating the natural evaporation process.

  • Eversys – Coffee Machine – C’2 Cameo

    The Cameo produces coffee and steamed/foamed milk as good as any barista can produce. The latest in Eversys’s leading-edge line of espresso machines that are known for quality, consistency, productivity and connectivity.

    The Cameo produces coffee and steamed/foamed milk as good as any barista can produce. The latest in Eversys’s leading-edge line of espresso machines that are known for quality, consistency, productivity and connectivity.

  • Eversys – Coffee Machine – Shotmaster

    Shotmaster is designed to fit environment with high espresso volume demand.

    Shotmaster is designed to fit environment with high espresso volume demand.

  • Exeron – HSC Line Milling Machine

    HSC Line: Maximum Speed, High Acceleration and Rotation Speed

    With our high-speed milling machines, impressive results can be achieved in both hard and graphite machining. The removal rates are so high that high-precisi…

    HSC Line: Maximum Speed, High Acceleration and Rotation Speed

    With our high-speed milling machines, impressive results can be achieved in both hard and graphite machining. The removal rates are so high that high-precision surfaces can be realised with the exeron milling technology.

  • Exeron Vertical Eroding Machine EDM 313

    EDM line: the highest level of efficiency

    From micro erosion to large-scale spark erosion machining tasks: Exeron’s EDM line vertical eroding machines are up to any task. Our erosion technology is compact thanks to the …

    EDM line: the highest level of efficiency

    From micro erosion to large-scale spark erosion machining tasks: Exeron’s EDM line vertical eroding machines are up to any task. Our erosion technology is compact thanks to the high level of integration of all important systems and units as well as the highly rigid machine body made of cast iron and polymer concrete. The stable and robust design of all machine components ensures our systems are durable and reliable.

  • ExtraEye – First Article Inspection Systems – A-6000

    The A6000 is a hardware/software system designed to assist in-line SMT production and find missing components, component errors, polarity errors, and rotation and offset faults. It is intended to minimize machine errors and human errors before the…

    The A6000 is a hardware/software system designed to assist in-line SMT production and find missing components, component errors, polarity errors, and rotation and offset faults. It is intended to minimize machine errors and human errors before they multiply in production. The hardware part includes a chassis carrying an XY axis system equipped with a camera producing high quality images and capable of inspecting all types of electronic components in top view, up to chip 01005 format. By automatically comparing a sample or the entire production, ExtraEye reduces operator fatigue and helps maintain stable and compliant production.

  • ExtraEye – First Article Inspection Systems – X-3040T & X-4040T

    ExtraEye is a hardware/software system designed to assist operators of all levels in the FAI production head validation process.The hardware part includes a chassis with motorized X/Y axes carrying a camera producing high qualit…

    ExtraEye is a hardware/software system designed to assist operators of all levels in the FAI production head validation process.The hardware part includes a chassis with motorized X/Y axes carrying a camera producing high quality images and capable of inspecting any type of component in top view up to chip 01005 format. By presenting an image of the assembled components in relation to BOM details as well as assembly drawings, ExtraEye significantly improves inspection speed, reduces operator fatigue and therefore provides accuracy of 100% inspection.

Delivering Growth – in Asia and Beyond

Follow Us

© DKSH International Ltd.  All Rights Reserved.

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test