All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filters
Search
  • Select Business Lines first
  • Select Business Lines first

Showing 481–504 of 1791 results

  • ELGA LabWater – PURELAB® – Chorus 1

    When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consistently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure® deionization system, the P…

    When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consistently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure® deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow.

  • ELGA LabWater – PURELAB® – Chorus 1 Complete

    PURELAB Chorus 1 Complete provides a complete solution from tap to ultrapure water direct from a potable water supply and is ideal for laboratories needing up to 100 liters of 18.2 MΩ.cm ultrapure water. With its simple and erg…

    PURELAB Chorus 1 Complete provides a complete solution from tap to ultrapure water direct from a potable water supply and is ideal for laboratories needing up to 100 liters of 18.2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional Halo Dispensers.

  • ELGA LabWater – PURELAB® – Chorus 2

    When Type II water is all you need, then PURELAB Chorus 2 (RO/DI) is the reliable solution with the flexibility to suit your requirements. A range of storage reservoirs designed to maintain the optimum purity of stored purified water in a choice o…

    When Type II water is all you need, then PURELAB Chorus 2 (RO/DI) is the reliable solution with the flexibility to suit your requirements. A range of storage reservoirs designed to maintain the optimum purity of stored purified water in a choice of 15, 30, 60 and 100-liter capacities.

  • ELGA LabWater – PURELAB® – Chorus 2+

    The PURELAB Chorus 2+ provides additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed …

    The PURELAB Chorus 2+ provides additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed from the system or from a choice of additional Halo Dispensers.

  • ELGA LabWater – PURELAB® – Chorus 3

    When general laboratory grade water is all you need, then PURELAB Chorus 3 is the reliable solution with the flexibility to suit your requirements.

    With a range of storage reservoirs designed to maintai…

    When general laboratory grade water is all you need, then PURELAB Chorus 3 is the reliable solution with the flexibility to suit your requirements.

    With a range of storage reservoirs designed to maintain the optimum purity of stored purified water in a choice of 15, 30, 60 and 100-liter capacities.

  • ELGA LabWater – PURELAB® – Flex 1 Dispenser (RO)

    The PURELAB flex 1 is designed to dispense water when it is connected to a reservoir or distribution loop.

    This system works as a dispenser as well as a simple deionization system.

    The PURELAB flex 1 is designed to dispense water when it is connected to a reservoir or distribution loop.

    This system works as a dispenser as well as a simple deionization system.

  • ELGA LabWater – PURELAB® – Flex 2 Polisher

    The award-winning PURELAB flex 2 system provides perfect water purity for analytical and life science applications which require RO type III water up to ultrapure type I (18.2 MΩ.cm) water. It allows you to focus on routine tes…

    The award-winning PURELAB flex 2 system provides perfect water purity for analytical and life science applications which require RO type III water up to ultrapure type I (18.2 MΩ.cm) water. It allows you to focus on routine test work without concern about the water quality affecting test results.

  • Elma – Ultrasonic Cleaners – Elmasonic EASY

    The Elmasonic EASY series includes 9 units of different sizes and is characterized by simple, user-friendly operation. With 100% ultrasonic power at a frequency of 37 kHz, the Pulse-function and visual warning (when bath tempera…

    The Elmasonic EASY series includes 9 units of different sizes and is characterized by simple, user-friendly operation. With 100% ultrasonic power at a frequency of 37 kHz, the Pulse-function and visual warning (when bath temperature reaches the set limit), the Elmasonic EASY solves typical cleaning tasks quickly and efficiently.

    The activatable Pulse-function is suited to remove tenacious, mineral soiling and polishing pastes. The ultrasonic power is increased up to 20%, so that any soiling will be removed easily and quickly.

  • Elma – Ultrasonic Cleaners – Elmasonic P

    Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.

    The produc…

    Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.

    The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz.

    The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.

  • Elma – Ultrasonic Cleaners – Elmasonic S

    Elmasonic S ultrasonic devices are available in 16 different sizes ranging from 0.8 to 90.0 litres maximum filling volume. They are equipped with an ultrasonic frequency of 37 kHz, functions like Sweep, Degas and Auto-Start and …

    Elmasonic S ultrasonic devices are available in 16 different sizes ranging from 0.8 to 90.0 litres maximum filling volume. They are equipped with an ultrasonic frequency of 37 kHz, functions like Sweep, Degas and Auto-Start and thus very versatile.

    The clearly arranged control panel is user friendly designed and splash-water protected. The cleaning process can be supported by an optional selectable, run-dry-proven heating. Furthermore Elmasonic S devices are very user-safe and shut down after 12 hrs. of operation.

  • Elma – Ultrasonic Cleaners – Elmasonic X-tra Basic

    Robust and powerful ultrasonic cleaning unit for industry and work shop. The Elmasonic X-tra basic series comprises 6 different unit sizes (300, 550, 800, 1200, 1600 and 2500). All units are equipped with multi-frequency (25/45 kHz, switchable), b…

    Robust and powerful ultrasonic cleaning unit for industry and work shop. The Elmasonic X-tra basic series comprises 6 different unit sizes (300, 550, 800, 1200, 1600 and 2500). All units are equipped with multi-frequency (25/45 kHz, switchable), bottom sound and heating.

  • Eltra – Carbon/Hydrogen/Sulfur Analyzer – CHS-580

    An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis),…

    An automatic sample loader allows for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. For reliable analysis of acidified samples (TOC analysis), both versions are available in an acid-resistance configuration.

    The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to four independent infrared cells for measuring carbon and sulfur concentrations, allowing for a great variety of applications.

  • Eltra – Carbon/Sulfur Analyzer – CS-580

    Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analy…

    Thanks to sample weights of 500 mg and more, even inhomogeneous materials can be reliably analyzed. The temperature of the powerful horizontal resistance furnace with ceramic tube can be set in steps from 1 °C to a maximum of 1,550 °C. The analyzer can be equipped with up to four independent infrared cells according to the user‘s requirements, allowing for a great variety of applications.

  • Eltra – Carbon/Sulfur Analyzer – ELEMENTRAC CS-i

    The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and su…

    The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and sulfur dioxide.

    The high temperature of more than 2000 °C ensures complete decomposition of the sample and thus reliable and accurate elemental analysis over a wide concentration range.

    The ELEMENTRAC CS-i meets and exceeds the requirements of all common standards for carbon and sulfur measurement, such as ASTM E1019, DIN EN ISO 15350.

  • Eltra – Hydrogen Analyzer – H-500

    Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in t…

    Determination of hydrogen using the heat extraction method is a special requirement for the characterization of steel, steel alloys, copper and other metals. ELTRA’s H-500 is designed for the rapid and accurate determination of hydrogen in these materials.

    The H-500 analyzer uses the heat extraction technique and is equipped with a resistance furnace with quartz tube. The temperature can be set up to 1000 °C in steps of 1 °C. The usual working range of the H-500 is about 900° to 1000° C. ELTRA’s H-500 can be customized to the requirements of the user. The analyzer carries up to two different sensitivities of the detectors to allow highest precision for a variety of applications.

  • Eltra – Thermogravimetric Analyzer – TGA Thermostep

    ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simu…

    ELTRA’s TGA Thermostep is a thermogravimetric analyzer which determines various parameters such as moisture, volatiles and ash at user-defined temperatures and atmospheres in a single analysis. The thermogravimetrics analyzer TGA Thermostep simultaneously analyzes up to 19 samples with sample weights up to 5 g and can be operated at temperatures up to 1000 °C.

    A special feature of the TGA Thermostep is the management of crucible covers. The thermogravimetric analyzer can place and remove the covers of the crucibles during analysis. This feature allows for example the precise determination of volatile content in coal and coke.

  • Escomatic – CNC – D2/D5 CNC

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

  • Escomatic – CNC – D2/D5 Flex Speed

    Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end …

    Escomatic D2 Flex Speed, the fastest solution for precise and economic tuning up to 5.0 mm maximum diameter parts produced in large and medium lot sizes. Escomatic D5 Flex Speed, the D2 basic machine equipped in addition with a three stations end working unit with two spindles for drilling operations.

  • Escomatic – CNC – D5 Twin

    The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

    The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (se…

    The escomatic D5 TWIN is equipped with an Affolter CNC System LESTE 10 with 8 axis (optional 10 with 2 C-axis).

    The turning operations are identical with the ones of an escomatic D2 CNC or D5 ULTRA. All basic tooling (set of straightening dies and holders, feed rollers and turning tools) are compatible with these machines.

  • Escomatic – CNC – D5 Ultra

    The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of th…

    The escomatic D5 CNC ULTRA is a new development based on the escomatic D2 CNC. In addition to the turning operations and based on the same principle well known by the users of the NM 64X, it is possible to machine the front and the back side of the part. On the front side drilling, tapping and threading is possible with three axially positioned spindles. After the cut-off of the part the back side can be machined simultaneously to the front side spindles and/or the turning operation by means of two axially and one laterally positioned spindles. With a tool head speed of 12‘000 min-1 and 18‘000 min-1 for the front and back working spindles this new machine offers the turning performance of a D2 CNC with ultra-performing secondary machining operations.

  • Escomatic – CNC – NM6 Flexi

    Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5…

    Unveiled on the 5th of October 2015 at the EMO in Milan, a new machine comes to complete the renewal of the escomatic products. This machine takes its place in the center of the Esco SA range between the DX CNC (escomatic D2 / D5 CNC, D5 Ultra, D5 TWIN) and the EC (escomatic EC 8). It will succeed the New Mach 64x range which has held a successful position for many years.

  • Escomatic – CNC – NM8 Flexi

    The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

    Thanks to the new design and to the use of two completely independen…

    The NM8 Flexi machine incorporates all the concepts of the NM6 Flexi machine that have made this lathe one of the most efficient products on the market.

    Thanks to the new design and to the use of two completely independent cross tables for the front and back machining units, the NM8 Flexi breaks the limits of flexibility and performance. Two parts can be manufactured at the same time: one part machined in the turning and front machining unit while the second part positioned in the counter spindle is undergoing back and side operations.

  • Escomatic – D2/D5 CNC

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

    The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

  • Escomatic EC8

    The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four…

    The escomatic EC 08, the logical and innovative sequence of the famous D6 series with CNC technology. This center of machining allows the economic machining of complex parts in small and large series up to a diameter of 8.0mm. Equipped with a four-tool chuck, two of which can work simultaneously, with up to 12 pick-up tools, this new cutting machine allows the use of cutting tools in the form of standard commercial pads.

Delivering Growth – in Asia and Beyond

Follow Us

© DKSH International Ltd.  All Rights Reserved.

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test