All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filters
Search

Showing all 22 results

  • Ecoclean – Aqueous Cleaning Solutions

    Today environmentally friendly aqueous cleaning has taken on the most important role for the intermediate and final cleaning of parts. They tend to be preferred if a large quantity has to be cleaned and/or fine and finest cleaning has to be carrie…

    Today environmentally friendly aqueous cleaning has taken on the most important role for the intermediate and final cleaning of parts. They tend to be preferred if a large quantity has to be cleaned and/or fine and finest cleaning has to be carried out.

    Cleaning systems for aqueous cleaning are available as flow-through spray units, single-chamber and multi-chamber systems. To attain a sufficient level of cleaning we integrate mechanical applications into the system, such as ultrasonics or injection flood washing, for example.

  • Ecoclean – Solvent Cleaning Solutions

    A common cleaning media for wet-chemical processes are solvents.

    Depending on the targetted cleanliness, the material compatibility and the nature of the contamination that has to be cleaned off either …

    A common cleaning media for wet-chemical processes are solvents.

    Depending on the targetted cleanliness, the material compatibility and the nature of the contamination that has to be cleaned off either (non-halogenated) hydrocarbons, chlorinated solvents or polar solvents may be selected.

  • Gecam – Finishing Machines – Brushing Machines

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Brushing Machines: Gecam CUB Brushing Machine, 761 Brushing M…

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Brushing Machines: Gecam CUB Brushing Machine, 761 Brushing Machine, GT13 Brushing Deburring Machine and Easy T Edge Rounding Deburring Machine.

    Gecam’s range of machines allow for work pieces of various shapes, sizes and materials, from stainless steel to iron and copper. Their machines are suited to a wide array of industries.

  • Gecam – Finishing Machines – Chamfering Machines

    Gecam Fintec 844 Electric Chamfering and Deburring

    The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two …

    Gecam Fintec 844 Electric Chamfering and Deburring

    The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two chamfers on both sides of the piece in one pass, ensuring a significant reduction in processing times. It consists of a cabinet base, which can hold spare abrasive belts and any accessories and is equipped with four swivel wheels, two of which with brakes. Variable speed conveyor belt unit, which can be tilted up to 30 ° to facilitate the insertion and alignment of the pieces during automatic processing. The speed of the conveyor belt can be read on a display directly in meters / minute and can be varied by acting on the appropriate potentiometer.

    The 844 model is made up of a fixed chamfering head equipped with two crossed free belts for chamfering from 0.1 to 1 mm on any type of material with thicknesses from 0.2 to 30 mm. The adjustment to the thickness of the pieces takes place via a practical handwheel.

    The 845 model consists of the 844 head and a second head with a free vertical belt with respect to the sliding direction of the belt for the removal of micro joints or slag produced by cutting.

    The model 846 is composed of the head 844 and a second horizontal head with tape on contact wheel, oscillating in order to ensure greater length of the tape, which also allows processing of polishing and polishing of the edge.

  • Gecam – Finishing Machines – Deburring Machines

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Deburring Machines: GT06 Sanding Deburring Machine,  GCB Sa…

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Deburring Machines: GT06 Sanding Deburring Machine,  GCB Sanding Deburring Machine, GE30 Belt Deburring Machine, GE60 RX Finishing Deburring Machine and Stiffelio G11 Sanding Deburring Machine.

    Gecam’s range of machines allow for work pieces of various shapes, sizes and materials, from stainless steel to iron and copper. Their machines are suited to a wide array of industries.

  • Gecam – Grinding Machines

     

    For over 20 years Gecam has developed and manufactured ma…

     

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Grinding Machines: Gecam 533 Large Grinding Machine, 128 S/SL Large Grinding Machine, 522 Flat Grinding Machine, 288 Pipe End Grinding Machine, 134 Variable-Angle Notching Machine and 135 Automatic Grinding Machine.

    Gecam’s range of machines allow for work pieces of various shapes, sizes and materials, from stainless steel to iron and copper. Their machines are suited to a wide array of industries.

  • Gecam – Sheet Metal Treatment – Filtering Solutions – Dry And Wet

    Gecam GFW Dust Filtration System

    Wet dust filtering system equipped with soundproofed fan, tank with float, front panel with plexiglass cover for inspection of the starting spray. Simple and safe vacuum o…

    Gecam GFW Dust Filtration System

    Wet dust filtering system equipped with soundproofed fan, tank with float, front panel with plexiglass cover for inspection of the starting spray. Simple and safe vacuum operation that guarantees constant results over time. The sucked air passes through a vertical labyrinth to immerse itself several times in the water contained in the tank located below, generating some vortices and nebulizations that force the suspended particles to precipitate before reaching the fan impeller and then reaching the exhaust pipe. The water in the tank is kept at a constant level by a float in a tank connected directly to the water system. The electrical system is located inside a watertight metal box.

  • Gecam – Sheet Metal Treatment – Levelling Machine

    For 25 years GECAM has been developing and manufacturing machines for grinding, satin finishing, deburring and finishing of sheet metal. Pursuing as the founding value of its production the attention to the quality of the�…

    For 25 years GECAM has been developing and manufacturing machines for grinding, satin finishing, deburring and finishing of sheet metal. Pursuing as the founding value of its production the attention to the quality of the 100% Italian material, over the years it has been able to become a reference production reality for the sector.

    The highly qualified staff allows a constant development of the production for the primary objective of satisfying the customer’s needs. The high quality guaranteed by an entirely local production and an efficient and punctual service allows GECAM to establish itself on the world market boasting 75% of total export sales compared to 25% on the national territory.

  • Gecam – Sheet Metal Treatment – Metal Sheet Grinding Machine

    Gecam Metal Sheet Grinding Machine

    Machine designed for cleaning edges of sheet metal strips with width from 30 to 450 mm and thickness from 0.5 to 4 mm, with separate electrical system. Two front heads w…

    Gecam Metal Sheet Grinding Machine

    Machine designed for cleaning edges of sheet metal strips with width from 30 to 450 mm and thickness from 0.5 to 4 mm, with separate electrical system. Two front heads with crossed free belt that work simultaneously and break the corner both above and below, two horizontal rear heads with belt on contact wheel to ensure satin finishing. The piece slides on a series of rollers with adjustable springs which can be opened using a digital tool. Heads individually adjustable through a special handwheel to ensure adequate contact of the tape on the piece.

  • Han’s Laser – Fiber Laser Cutter Machine – HF & F series

    HF Series Fiber Laser Cutting Machine

    HF series fiber cutting machine takes full advantage of the optical fiber transmission. The laser is directly transmitted from the laser to the cutting head of the ma…

    HF Series Fiber Laser Cutting Machine

    HF series fiber cutting machine takes full advantage of the optical fiber transmission. The laser is directly transmitted from the laser to the cutting head of the machine tool through the optical fiber. The mechanical structure is simple, the optical path is constant, the maintenance is basically maintenance-free, and the cutting performance is stable.

    F Series Fiber Laser Cutting Machine

    Han’s Laser has been innovating the laser cutting technique for the past 10 years, now the ultra-fast laser cutting technique has widely used in carbon steel, stainless steel and aluminum alloy. The latest cutting technique can also apply to non-ferrous metals includes aluminium & aluminium alloys, copper, brass, and zinc. The powerful CNC system and nesting software solves 100% difficulties for specific cutting and upgrade ahead of the precision and piercing speed during the whole cutting process, and user-friendly.

  • Han’s Laser – Laser Cutting Systems – Middle Power Cutting Machine

    High SpeedHigh 

    High SpeedHigh Performance Laser Cutting

    Han’s Laser middle power laser cutter is widely use in carbon steel, stainless still, alloy steel, galvanized sheet, albumin sheet high speed cutting. Typically use in kitchen, Various cabinets industry. There are three models available to cater to different application needs.

    Han’s Laser middle power fiber laser cutters are a series of mature products up to international advanced level. This series of products have the incomparable advantages of powerful cutting ability, outstanding cutting speed, extremely low running cost, high-quality processing ability and strong adaptability.

  • Han’s Laser – 3D-5 Axis Laser Cutting Machine

    Precision Technology

    Model W4525D、W4020D,High cutting accuracy, fast cutting speed, small heat affected zone, good surface finish, moving speed up to 100m/min.

    Flexible Processing

    Precision Technology

    Model W4525D、W4020D,High cutting accuracy, fast cutting speed, small heat affected zone, good surface finish, moving speed up to 100m/min.

    Flexible Processing

    Three-dimensional processing head can achieve infinite rotation of n × 360 °, ± 135 ° swing, from cutting to welding, rapid replacement of the processing head, without adjustment, a dual-purpose machine.

    Advanced Technology

    The fiber laser has a high energy conversion rate, which is 60% lower than that of the same power CO2 laser and is free from optical path maintenance. The laser consumes no gas, and the equipment operation cost is low.

  • Klingelnberg – Bevel Gear Solutions

    The mechanical engineering company is the global market and technology leader in its areas. These include the development and manufacture of machines for the production of bevel and cylindrical gears, measuring centers for axially symmetrical obje…

    The mechanical engineering company is the global market and technology leader in its areas. These include the development and manufacture of machines for the production of bevel and cylindrical gears, measuring centers for axially symmetrical objects of all types, and the production of high-precision gear components made to customers’ orders.

    Today Klingelnberg operates engineering and manufacturing facilities in Zurich, Switzerland, Hueckeswagen and Ettlingen, Germany, and Gyoer, Hungary. The company maintains a global presence with Sales and Service offices in Italy, France, Spain, Russia, Japan, India, China, Brazil, the United States, and Mexico.

    The company’s declared aim is to continue to provide highly efficient, competitive products for customers and partners from a range of industries, including the automotive, commercial vehicle and aircraft industries, shipbuilding, the wind-power industry, and general gear manufacturing. In all its dealings, Klingelnberg is respectful of the environment – as evidenced by its ISO 14001 certification and participation in the Blue Competence Initiative by the German Engineering Federation (VDMA).

  • Remmert – Automation solutions

    Robotics and similar technology for more efficiency in storage. Whether large-scale or batch size – we develop individual and flexible automation solutions. The full automation of your storage machines mean more efficient manufacturing proce…

    Robotics and similar technology for more efficiency in storage. Whether large-scale or batch size – we develop individual and flexible automation solutions. The full automation of your storage machines mean more efficient manufacturing processes, reduced production costs and maximum investment security. Another advantage of Remmert automation solutions is the manufacturer-independence. If you choose to make a replacement investment, you only need to exchange the storage machines affected and not all of your material handling apparatus.

  • Remmert – Logistical software

    Our experts integrate the process-optimised Remmert logistical software easily and quickly into your existing system architecture. If desired, we connect your processing machines, as well as HOST systems, independent of the respective manufacturer…

    Our experts integrate the process-optimised Remmert logistical software easily and quickly into your existing system architecture. If desired, we connect your processing machines, as well as HOST systems, independent of the respective manufacturer, to the Warehouse Management System. Your employees can get straight to work. Finally, our software is inspired by the typical Windows look and feel and is intuitively operable.

  • Remmert – Long goods storage

    Maximum flexibility and efficiency for your long goods storage. At Remmert, you receive all the services you need for optimal storage processes from one source: the storage system, the logistics software and the handling systems. Together, we deve…

    Maximum flexibility and efficiency for your long goods storage. At Remmert, you receive all the services you need for optimal storage processes from one source: the storage system, the logistics software and the handling systems. Together, we develop the best solution for your individual requirements.

  • Remmert – RetroFit

    Perfect for anyone looking for a storage modernisation suiting their requirements. Uncomplicated, quick, client-specific. We make your storage system fit for use – quick and uncomplicated. Our expertise: the optimisation of production and in…

    Perfect for anyone looking for a storage modernisation suiting their requirements. Uncomplicated, quick, client-specific. We make your storage system fit for use – quick and uncomplicated. Our expertise: the optimisation of production and intralogistical processes. To allow you to focus on your key skills, we complete your RetroFit during operation. As Remmert develops RetroFit concepts in a task-based and manufacturer-independent way, the modernisation of storage systems from other manufacturers is also easy to achieve. Solutions for complex problems all in one place. Together with you, we make every RetroFit concept custom to meet your requirements.

  • Remmert – Sheet Metal Storage

    Maximum flexibility and efficiency for your sheet metal storage. At Remmert, you receive all the services you need for optimal storage processes from one source, these are the storage system, the logistics software and the handling systems. Togeth…

    Maximum flexibility and efficiency for your sheet metal storage. At Remmert, you receive all the services you need for optimal storage processes from one source, these are the storage system, the logistics software and the handling systems. Together, we develop the best solution for your individual requirements.

  • Studer – Conventional Cylindrical Grinding Machines – S20 & S30

    STUDER conventional cylindrical grinding machines are designed for the grinding of workpieces in individual as well as small and large series production operations.

    The S20 is designed…

    STUDER conventional cylindrical grinding machines are designed for the grinding of workpieces in individual as well as small and large series production operations.

    The S20 is designed for grinding medium-sized workpieces in individual and batch production. It is suitable for use in any industry where precise small components are manufactured. Operation is very simple and the machine can be reset very quickly.

    The S30 is designed for grinding workpieces in individual and small batch production. It is suitable for use in any industry where precise medium-sized workpieces are manufactured. Operation is very simple and the machine can be reset very quickly.

  • Studer – External Universal Cylindrical Grinding Machines

    From the entry level machine for the most important applications to the all-rounder for complex grinding tasks. Small to large workpieces for individual, small and large-scale production. You have the choice between five universal cylindrical grin…

    From the entry level machine for the most important applications to the all-rounder for complex grinding tasks. Small to large workpieces for individual, small and large-scale production. You have the choice between five universal cylindrical grinding machines with center distances of 400mm (15.7″), 650mm (25.6″), 1000mm (40″) and 1600mm (63″) and a center height of 175mm (6.9″).

  • Studer – Internal Cylindrical Grinding Machines

    The internal cylindrical grinding machines are designed to solve almost anything you need: Flange parts, spindle shafts, spindle housings, rotor shafts, bushes and much more for the areas of machine tools, drive elements, aerosp…

    The internal cylindrical grinding machines are designed to solve almost anything you need: Flange parts, spindle shafts, spindle housings, rotor shafts, bushes and much more for the areas of machine tools, drive elements, aerospace and toolmaking.

    Whether flange parts or spindles up to 1 300 mm (51.1″) in length, the universal internal cylindrical grinding machines can master any challenge.

  • Studer – Production Cylindrical Grinding Machines – S11 & S22

    The Studer S11 production cylindrical grinding machine is the youngest S11 and the smallest machine in the company’s portfolio and is tailor-made for workpieces up to 200 mm in length.

    If space-sa…

    The Studer S11 production cylindrical grinding machine is the youngest S11 and the smallest machine in the company’s portfolio and is tailor-made for workpieces up to 200 mm in length.

    If space-saving is your priority, then the S11 is the right machine for you. In a space of less than 1.8 m² the S11 produces extremely efficiently and reliably with a grinding wheel diameter 500 mm.

Business Lines

Commercial and Industrial Applications

Precision Machinery

Scientific Solutions

Semiconductor & Electronics

Order Online

LabShop

Delivering Growth – in Asia and Beyond

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test