Nutek – PCB Inverter – Standard Series
This unit is used to invert PCBs (180°) for “double-sided” process.
This unit is used to invert PCBs (180°) for “double-sided” process.
Showing 49–66 of 66 results
-
-
PBT Works – CompaClean
For customers with preference of traditional dishwasher style machine, CompaCLEAN provides the type of cleaning many are accustomed to while minimising the shadow effect thanks to unique linear tangent spray technology. PCBs are…
For customers with preference of traditional dishwasher style machine, CompaCLEAN provides the type of cleaning many are accustomed to while minimising the shadow effect thanks to unique linear tangent spray technology. PCBs are loaded just like plates into a typical kitchen dishwasher.
Key Features
- Small Footprint
- Single Basket or Double Basket
- Easy Loading
- Basket Oscillation
- Uniform Tangent Spray
- Shadow Mitigating System
- Adaptive Rinse
- Closed or Open Loop
- Low Running Cost
-
PBT Works – HyperSWASH III
Top-end solution for customers looking for both high quality cleaning result and high throughput with focus on data management and automation.
Top-end solution for customers looking for both high quality cleaning result and high throughput with focus on data management and automation.
-
PBT Works – MiniSWASH
This machine is a budget solution for anyone who does not expect to clean PCBAs on daily basis. Typically Research and Development centres, prototyping, start-ups and very low volume producers would find this machine sufficient …
This machine is a budget solution for anyone who does not expect to clean PCBAs on daily basis. Typically Research and Development centres, prototyping, start-ups and very low volume producers would find this machine sufficient to achieve great results.
Application: Standard SMD Assemblies. Capacity: Small Volume Contamination Solubility: Easy to Moderate
Key Features
- Uses self- rinsing cleaning agents – no waste water problems from rinse
- Motor-driven spray-arms rotate simultaneously. Cleaning without risk of damage even to very thin and fine stencil
- Safety clutch and rotation monitoring of spray manifolds assures safe process and protection of stencil against damage from incorrectly placed stencils
- Spray chamber equipped with special automatically controlled exhaust/inlet air flaps. Hermetically closed during spray
- Efficient drying with hot air circulation and controlled ventilation through exhaust/inlet air flaps
- Compact design with very small floor space requirement
- Easy transport even through 80 cm doors
-
PBT Works – SuperSWASH
Ideal machine for customers looking for the best cleaning results without the need for automation or very high throughput. Best solution for medium to low quantity of complex products that need to be cleaned perfectly. Application: High Density SM…
Ideal machine for customers looking for the best cleaning results without the need for automation or very high throughput. Best solution for medium to low quantity of complex products that need to be cleaned perfectly. Application: High Density SMD Assemblies Capacity: Low to Medium Volume Contamination Solubility: Easy to Hard Handling Handling with the parts to clean is simple and safe. SuperSWASH III Reloading Stand
PCBAs are reloaded on the dedicated reloading stand. Operators reloads frames directly into machine chamber. This minimizes downtime to zero and provides comfortable time for reload.
Key Features
- Ultimate cleaning performance
- Easy operation
- Zero drain concept
- Linear direct spray for equal washing
- Hot air knife direct dry
- Illuminated glass door chamber for visual process control
- Quick changover to Twingo – double capacity configuration
- Wide range of standard and customized PCBA fixtures
-
SMT – Full Convection Reflow Soldering Systems
The reflow soldering systems from SMT Wertheim stand for maximum efficiency and high product throughput with stable soldering quality.
The reflow soldering systems from SMT Wertheim stand for maximum efficiency and high product throughput with stable soldering quality.
-
VJ Electronix – Apogee 90
The APOGEE 90 was built to fulfill the need for an affordable and reliable inspection system with advanced features for defect detection, failure analysis, and NDT in production environments.
The APOGEE 90 was built to fulfill the need for an affordable and reliable inspection system with advanced features for defect detection, failure analysis, and NDT in production environments.
-
VJ Electronix – Summit 1800i
The most installed rework system in the world. The Summit 1800i is capable of handling boards up to 22″x30” and components as small as 01005. Built with easy-to-use 1-2-3-GO software, operation of this rework system is s…
The most installed rework system in the world. The Summit 1800i is capable of handling boards up to 22″x30” and components as small as 01005. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and intuitive. Efficient convection heating provides high thermal throughput, uniformity, and a repeatable rework process. Proprietary software provides product traceability, profile analysis, and sharing of profiles between VJE systems.
-
VJ Electronix – Summit 2200i
Our rework system boasts user-friendly 1-2-3-GO software and efficient convection heating, along with proprietary software for product traceability and profile sharing between VJE systems. Automated features enable the reworking…
Our rework system boasts user-friendly 1-2-3-GO software and efficient convection heating, along with proprietary software for product traceability and profile sharing between VJE systems. Automated features enable the reworking of large components, while non-contact site scavenging ensures the safe removal of residual solder. This system provides a reliable and efficient solution for rework processes.
Rework done on the Summit 2200i with Auto Align results in reliable, repeatable processes with greater system up-time, machine utilization, and a faster ROI.
-
VJ Electronix – Summit 750i
The cost-effective and high performance solution to your rework needs. The Summit 750i is capable of handling boards up to 18″x22” and components as small as 0201. Built with easy-to-use 1-2-3-GO software, operation of t…
The cost-effective and high performance solution to your rework needs. The Summit 750i is capable of handling boards up to 18″x22” and components as small as 0201. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and intuitive.
-
VJ Electronix – Summit Lxi
The go-to rework system for 5G, and large board applications. The Summit LXi is capable of handling boards up to 25″x47” and components as small as 01005. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and …
The go-to rework system for 5G, and large board applications. The Summit LXi is capable of handling boards up to 25″x47” and components as small as 01005. Built with easy-to-use 1-2-3-GO software, operation of this rework system is simple and intuitive.
-
VJ Electronix – XQuik II Plus
The XQuik II Plus is an improved version of the most installed component counter in the world today. With improved speed, higher count accuracy, and reduced cost, the XQuik II Plus is the go-to solution for your organization.
The XQuik II Plus is an improved version of the most installed component counter in the world today. With improved speed, higher count accuracy, and reduced cost, the XQuik II Plus is the go-to solution for your organization.
VJ Electronix – XQuik II Plus Autoload
The system’s advanced detection algorithms automatically recognize components without the need for cumbersome models, libraries, or cloud connection, making it quick and simple to use. Unique imaging technology provides the gr…
The system’s advanced detection algorithms automatically recognize components without the need for cumbersome models, libraries, or cloud connection, making it quick and simple to use. Unique imaging technology provides the greatest count accuracy and reliability.
VJ Electronix – XQuik III
XQuik III Highest count accuracy in the simplest, fastest x-ray component counter. XQuik III counts the most difficult reels at the 99.8% industry accuracy standard.
XQuik III Highest count accuracy in the simplest, fastest x-ray component counter. XQuik III counts the most difficult reels at the 99.8% industry accuracy standard.
Youibot – Lifting Series – L1000
With a payload of 1000 kg, the L1000 is one of the most powerful autonomous mobile robots (AMRs). Designed to handle the heaviest workload in various facilities, as well as optimize intralogistics efficiency and throughput in wa…
With a payload of 1000 kg, the L1000 is one of the most powerful autonomous mobile robots (AMRs). Designed to handle the heaviest workload in various facilities, as well as optimize intralogistics efficiency and throughput in warehouses, it automates the movement of goods, racks, and pallets.
The YOUIFLEET management system enables fleet collaboration across up to 1000 AMRs under one system, enabling a true ‘light-out’ operation.
Youibot – Lifting Series – L300
L300 is the agile, perfect option for warehouses or manufacturing facilities with narrow passageways. Carrying a maximum payload of 300 kg, the AMR is equipped with a top module that elevates at a maximum height of 60mm and rota…
L300 is the agile, perfect option for warehouses or manufacturing facilities with narrow passageways. Carrying a maximum payload of 300 kg, the AMR is equipped with a top module that elevates at a maximum height of 60mm and rotates at 360 degrees. The YOUIFLEET dispatching system allows a fleet collaboration of up to 1,000 AMRs under the same operation area, enabling a real light-out operation.
Youibot – Platform Series – B300
The B300 Mobile Robot is a cost-effective solution for industrial logistics, capable of integrating with various top modules (rollers, racks, etc.) for various material transport tasks in warehouses, cleanrooms, and production l…
The B300 Mobile Robot is a cost-effective solution for industrial logistics, capable of integrating with various top modules (rollers, racks, etc.) for various material transport tasks in warehouses, cleanrooms, and production lines.
Youibot – Platform Series – P200
Versatile solution with general-purpose interfaces support over 10 kinds of top modules and cobot to tackle any material transport tasks in warehouses, cleanrooms, and production lines.
Versatile solution with general-purpose interfaces support over 10 kinds of top modules and cobot to tackle any material transport tasks in warehouses, cleanrooms, and production lines.
Delivering Growth – in Asia and Beyond
Follow Us
© DKSH International Ltd. All Rights Reserved.
Contact us
test block for Laos
Contact us
Contact us
Your download – just a few steps away
Please enter your details here:
<iframe src=”https://contactmarketing.dksh.com/l/992242/2024-07-21/37w9k“>