Your Entry to the World of Automated XRF-Measurement

The FISCHERSCOPE® X-RAY XDL® and XDLM® X-ray fluorescence (XRF) spectrometers are closely related to the XUL series. All the main components – such as the detector, X-ray tubes and filter combinations – are identical. But there is a significant difference: The XDL and XDLM devices measure from top to bottom. And that means convenient XRF analysis of non-flat samples – complex shapes are no longer a problem!

pH Electrode Sensor

This pH sensor head is part of the AdvantEDGE probe system that allows a direct connection to a PLC for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. A LD500 local display can be used if desired. Sensor heads are pre-calibrated and can be replaced or exchanged with any other type of sensor without taking the system down. Save space, time and money.

The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed on screen in units of KOH/g and are also stored via internal data logger. Flexible data management options allow for export of readings to a PC or printer.

Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D975); biodiesel B6 to B20 (Specification D7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D396); aviation turbine fuel (Specification D1655).

Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor.

The Automatic Abel Flash Point Tester is used primarily to test flammable and combustible materials for shipping and safety regulations. The flash tester provides an increased temperature range of operation as compared with other testers, allowing greater flexibility in testing samples according to the Abel test method. The unit provides a test range to 110°C and can be extended to –30°C by any appropriate external chiller.

Rapid Tester® provides rapid determinations of flash point or sustained burning qualities by using a small sample. A flash/no flash test result is achieved in one minute for flash points below 212°F (100°C) with a 2mL sample.

Fully automatic bench top centrifuge designed expressly for petroleum testing applications. Features a 4-1/2” LCD touch screen control panel. This integrated touch screen can be used to turn the heat on and off, set the duration of the test, set the RCF/RPM values and choose the type of rotor assembly and corresponding glassware to be used during the test.