The Miniflash Flash Point Testers are uniquely designed for the determination of flash points of liquids and solids, using the Grabner flash point detection method of measuring the instantaneous pressure increase inside the continuously closed chamber.

The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.

The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel pressure vessel during testing.

Fully insulated, thermostatically controlled water bath with constant water level device. Use together with K25370 Bath Conversion Kit to immerse six 350mL test tubes for silver strip corrosion tests. Stainless steel inner wall and powder coated steel outer wall construction.

The Automated Tag Closed Cup flash point tester ensures the accuracy and precision required according to the ASTM D56 and related test methods. The test sample is heated at a prescribed rate of temperature increase throughout the standard temperature test range to 100°C. The flash point tests are simply conducted by mounting the flash cup filled with sample into the test position and selecting a pre-programmed test method or the search mode to determine an approximate flash point. The automation routines provide accurate test results. Ignition by gas flame or electrical ignitor is included, along with safety cut-off devices. The measurement range can be extended to –30°C by any appropriate external chiller. Supervision software is included.

This simple-to-use biodiesel GC system is ideal for the quantitative determination of free and total glycerin in B100 methyl esters by gas chromatography. The calibrated results are displayed directly, eliminating off-line calculations.

The Tackiness Tester, K95200, has been designed to provide an objective and qualitative test for tackiness. The tester quantifies the cohesive and adhesive tactile properties of greases by measuring the sample in Newton’s and replaces the old finger sticky test method with a numerical and graphical result.

Test the range of boiling points for petroleum and biofuel products with this vacuum distillation system. The sample is distilled at a reduced pressure and the initial and final boiling points are measured. A distillation curve can be generated relating volume percent distilled and the atmospheric equivalent boiling point temperature.