The new award winning Postnova TF2000 Thermal FFF Series was invented to become the first professional modular Thermal FFF system available. It is completely integrated by the NovaFFF single software platform which runs the entire system from autosampler to detectors.

AF2000 MF High Temperature Flow FFF Thermostat Module with integrated autosampler, channel and detector oven compartment and electronics unit, for advanced separation and characterization of polyolefin polymers, such as Polyethylene and Polypropylene. Temperature Range: Ambient to 220°C; Molar Mass Range: 10e3 to 10e12 Da; Particle Size Range 1 nm to 1000 nm. System comprising of one single integrated chassis inclunding moveable high temperature autosampler rack (25 sample vials, 5 mL volume) in lower system section, high temperature oven compartment for Flow FFF channels and detectors in the upper section, large top door for easy opening and access to channel and detectors as well as control electronics in the back part of the instrument and special Thermostat Control software connected to and running automated with NovaFFF. System can be equipped with various online high temperature detectors, which have to selected optional, such as High Temperature Infrared (HT-IR), Refractive Index (HT-RI), Multi-Angle Static Light Scattering (HT-MALS) and Viscometry (HT-VISCO). Additional Required Components: 1) High Temperature Flow FFF channel cartridge; 2) High Temp IR and/or additional detectors; 3) Control PC for NovaFFF and Thermostat Control software.

The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers. The manually operated test procedure is very simple to undertake. Molten Polymer is extruded through a closely controlled orifice (die) from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system. The extruded polymer is cut off manually and is then weighed. Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined, thus giving the Melt Flow Index (MFI) or Melt Mass Flow Rate (MFR) in g/10 min. By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate (MVR) can also be determined.

Bulk density apparatus is testing equipment used to measure the bulk density property of powder, granules and other “divided” solids, especially used in reference to mineral components (soil, gravel, sand), chemical substances, (pharmaceutical), plastics like polyethylene (hdpe or mdpe) pvc, polystyrene etc, or foodstuff and any other masses of granular or particulate matter. The Method A tester is primarily used to measure the apparent density of fine granules that can be poured readily through a “V” shaped funnel, the material under test is allowed to flow into a cylindrical cup with a known volume of 100cm³.

MagCore® Super is RBC Bioscience’s most advanced and efficient robotic workstation for nucleic acid extraction. It is the first platform combining EXTRACTOR and SPECTROPHOTOMETER.

Laboratory and industrial production process control requires a fast and accurate analysis of sample to allow optimum operating conditions to be set and maintained. This can apply equally to food and beverage production, pharmaceutical products or biopharmaceutical manufacturing systems for both cell culture and microbial applications.

Microprocessor control and operator-friendly software makes the 17-76 simple to operate. A new Servo motor design provides closed loop feedback for accurate and repeatable position control.  Ergonomic control layout maximizes the testing sequence while minimizing sample testing errors resulting in incorrect data.  The instrument meets or exceeds all international testing standards for accuracy, precision, and parallelism.

The Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569 and ISO 16260. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a “Z” type direction into two plies.