The Air Jet Erosion Test Rig has been developed to evaluate the erosion resistance of variety of materials and conforms to the specifications of ASTM G76 standard. The principle of operation consists of subjecting the test sample to a jet of air carrying the erodent, through a tungsten carbide nozzle of a known diameter. The impingement of the erodent particles on the test sample surface causes erosion and this is quantified by weight loss method. The particle velocity is controlled by varying the flow rate of air and the erodent feed rate is varied by changing the speed of the conveyor system which delivers the erodent to the jet of air. The particle velocity is measured with a well-established Double Disc arrangement method. The test sample temperature can be varied from ambient to 4000C and test sample inclination is infinitely variable 0-900 with respect to the jet of erodent particles.

Koehler’s Four Ball Tester determines the Wear Preventative (WP) and Extreme Pressure (EP) characteristics of lubricating oils and greases in sliding steel-on-steel applications. The test consists of rotating a steel ball under load against three stationary steel balls coated with lubricant.

Data Acquisition System incorporates sensor and signals with a combination of data acquisition hardware and software to create a complete measurement system. They measure Real Time Data of physical properties of test materials. 

KV5000 model Kinematic Viscosity Baths with optical flow detection system provide automatic viscosity measurements of petroleum and petrochemical products. Includes communication and power ports for each optical detection assembly, and can utilize up to five optical assemblies.