HPx High-Pressure Dispensing Tool easily apply precise amounts of thick assembly fluids like epoxies and medical-grade adhesives through dispense tips as small as 0.004” with Nordson EFD HPx™ dispensing tools. Featuring a unique design, HPx tools increase the pressure inside disposable syringe barrels up to seven times. Designed to work with Nordson EFD air-powered dispensers, they produce a maximum dispensing pressure of 700 psi. Increase yields and produce better quality parts in less time, while minimizing the risk of repetitive stress injuries.

Industry-Leading Throughput and Reliability

Built upon Nordson Electronics Solutions’ patented plasma technology, the FlexTRAK®-SHS is our latest fully automated plasma system incorporating a high-capacity F3-S chamber, to provide high uniformity and increased productivity. The chamber architecture remains the same as the smaller FlexTRAK platform, providing a seamless transition between chambers as production demands more capacity.

Key Applications

 

• Pre-wire bond plasma treatment on semiconductor package substrates and lead frames
• Pre-underfill plasma treatment on flip chip packages
• Pre-mold plasma treatment on semiconductor package substrates and lead frames
• Plasma treatment of semiconductor package substrates and lead frames for improved adhesion
• Removal/reduction of oxidation on lead frame

Nordson Electronics Solutions introduces its PD Series Plasma Deposition Systems family, which uses plasma polymerization to deposit thin films uniformly during precision manufacturing and assembly processes to change the surface characteristics of a substrate. Plasma deposition can be used for applications in a wide range of industries, including medical, life sciences, industrial, semiconductor, MEMS, plastics, and electronics.

The PD Series for plasma deposition uses a gas vapor or heated liquid monomer vapor delivery system to deposit coatings that can reduce, and in certain cases eliminate, tackiness, provide a tie layer, make surfaces more slippery or resistant to corrosion, act as a drug enhancement or inhibition agent in life sciences applications, and change desired surfaces from hydrophobic to hydrophilic or vice versa. Polymers can be directly attached to a desired surface while the chains are growing, which reduces the steps necessary for other coating processes such as grafting. This is very useful for pinhole-free coatings of 100 picometers to 1 micrometer thickness with solvent insoluble polymers.

Key Features

• Low-temperature processing because plasma energy is the catalyst for film growth.

• Plasma deposition is uniform and applies coatings evenly over curved or varied-level surfaces.
• Precise control of film thickness.
• Eliminates wet chemistry. Because polymers are deposited directly from the monomer, there are no waste streams due to wet chemical synthesis or solvents.
• Exhibits similar properties to those created via standard chemical polymerization techniques.
• Can be used in multiple steps during device manufacture: pre-treat the surface, deposit material, and apply functionalized polymer films.

SPHERE series systems support automated handling and processing of round or square wafer/substrate sizes ranging from 75mm to 300mm. In addition, thin wafer processing with or without carriers is possible, depending upon wafer thickness.

The patented plasma chamber design provides exceptional etch uniformity and process repeatability. Primary plasma applications include a variety of etching, ashing, and descum steps. Other plasma processes include contamination removal, surface roughening, increasing wettability, and enhancing bonding and adhesion strength, photoresist/polymer stripping, dielectric etch, wafer bumping, organic contamination removal, and wafer destress.

• Wafer Cleaning – The SPHERE series plasma systems remove contamination prior to wafer bumping, remove organic contamination, remove fluorine and other halogen contamination, and remove metal and metal oxides. Plasma also improves spun-on film adhesion and cleans metallic bond pads.
• Wafer Etching – Plasma systems descum wafer of residual photoresist and BCB, pattern dielectric layers for redistribution, strip/etch photoresist, enhance adhesion of wafer applied materials, remove excess wafer applied mold /epoxy, enhance adhesion of gold solder bumps, destress wafer to reduce breakage, improve spun-on film adhesion, and clean aluminum bond pads.

AP series plasma treatment machines are suitable for a wide variety of plasma cleaning, surface activation and adhesion improvement applications. These capabilities are used for semiconductor manufacturing, microelectronic packaging and assembly, and by manufacturers of medical and life science devices. The AP Series consists of four batch plasma treatment systems offering small, mid-size and large vacuum chamber options that deliver process correlation, controller continuity and reliable, reproducible vacuum gas plasma treatment to customers as they expand from an R&D environment to various levels of production.

Bare Board Loader With Pass Through Mode is used for loading of bare PCBs to the production line.

This unit is used for loading of substrates, leadframes or carriers.

Nutek – Laser Marking Cell Series 3 unit is used to mark text, barcode, 2D code & graphic onto PCBs.

Nutek – Laser Marking Cell Series 5 unit is used to mark text, barcode, 2D code & graphic onto PCBs.

The Multi Function Cage-type Buffer offers multiple functions, making it adaptable to diverse manufacturing environments. It efficiently manages product flow, optimizes space utilization, and minimizes the risk of damage during transit. The buffer system’s intelligent control system ensures smooth and synchronized operations, reducing bottlenecks and enhancing overall productivity.

The NTA In-line Workstation is used to link between SMD machines or board handling units. It also allows manual assembly work to be carried out.

This unit is used to invert PCBs (180°) for “double-sided” process.

Faulty boards can be lifted up for visual inspection without interrupting the PCBs flow.

This unit is used for restacking of PCBs from the production line.

This unit is used for loading of substrates, leadframes or carriers.

This unit is used when a passage way is required in a production line (fully automatic).

This unit is used to redirect flow of PCBs into different channels in a production line.

For customers with preference of traditional dishwasher style machine, CompaCLEAN provides the type of cleaning many are accustomed to while minimising the shadow effect thanks to unique linear tangent spray technology. PCBs are loaded just like plates into a typical kitchen dishwasher.

Key Features

• Small Footprint
• Single Basket or Double Basket
• Easy Loading
• Basket Oscillation
• Uniform Tangent Spray
• Shadow Mitigating System
• Adaptive Rinse
• Closed or Open Loop
• Low Running Cost

This machine is a budget solution for anyone who does not expect to clean PCBAs on daily basis. Typically Research and Development centres, prototyping, start-ups and very low volume producers would find this machine sufficient to achieve great results.

Application: Standard SMD Assemblies. Capacity: Small Volume Contamination Solubility: Easy to Moderate

Key Features

• Uses self- rinsing cleaning agents – no waste water problems from rinse
• Motor-driven spray-arms rotate simultaneously. Cleaning without risk of damage even to very thin and fine stencil
• Safety clutch and rotation monitoring of spray manifolds assures safe process and protection of stencil against damage from incorrectly placed stencils
• Spray chamber equipped with special automatically controlled exhaust/inlet air flaps. Hermetically closed during spray
• Efficient drying with hot air circulation and controlled ventilation through exhaust/inlet air flaps
• Compact design with very small floor space requirement
• Easy transport even through 80 cm doors

Ideal machine for customers looking for the best cleaning results without the need for automation or very high throughput. Best solution for medium to low quantity of complex products that need to be cleaned perfectly. Application: High Density SMD Assemblies Capacity: Low to Medium Volume Contamination Solubility: Easy to Hard Handling Handling with the parts to clean is simple and safe. SuperSWASH III Reloading Stand

PCBAs are reloaded on the dedicated reloading stand. Operators reloads frames directly into machine chamber. This minimizes downtime to zero and provides comfortable time for reload.

Key Features

• Ultimate cleaning performance
• Easy operation
• Zero drain concept
• Linear direct spray for equal washing
• Hot air knife direct dry
• Illuminated glass door chamber for visual process control
• Quick changover to Twingo – double capacity configuration
• Wide range of standard and customized PCBA fixtures

PEER Group® provides the largest portfolio of equipment connectivity and automation software products to equipment makers (OEMs) in the semiconductor and related industries. With over 100,000 licenses shipped, PEER Group is the leading supplier of factory automation software for Smart Manufacturing and Industry 4.0.

PEER Group® provides the largest portfolio of factory automation software products and services to high-volume manufacturers in the semiconductor and related industries. With over 100,000 licenses shipped, PEER Group is the leading supplier of factory automation software for Smart Manufacturing and Industry 4.0.

The Phoenix series is designed to offer the flexibility required for QA. R&D and engineering process development. The Phoenix is a quite simple and virtually any measure size without sample cutting sample cutting preparation. Light-weight means simple control device and simple handling. Phoenix adopted USB type camera. Easily connect to laptop and desktop computer with Surfaceware software.

Key Features

• Software working on Windows 7/8/10 32bit
• Preview function for rapidly capture image
• Contact angle measurement range: 3- 180°
• No required cutting sample
• Data export to Microsoft Excel
• Available to connect to notebook or desktop PC via USB port
• Analysis of plasma treatment to increase the wettability of polymers surfaces
• Adsorption / Wettability of powder and pharmaceutical products

The AOP platform is the most flexible and modular Solarius solution for all kinds of customized measurement tasks. Depending on the indivisual task, it can be equipped with different 3D measuring sensors out the entire available technology portfolio, many sizes of motion systems and customized software. Its flexibility supports a wide variety of applications and working environments and can be tailored to meet each customer’s requirements.

Sensor Types

• Chromatic confocal point sensors
• Chromatic confocal line sensors
• Confocal matrix sensors
• Interferometric matrix sensors
• Focus variation matrix sensors
• Point triangulation sensors
• Line triangulation sensors

The modular AOP platform can be equipped with all availabe non-destructive measurement technologies, including chromatic confocal point and line sensors, confocal area sensors, laser line triangulation sensors, interferometric sensors, and 2D camera systems. Height resolutions down to the single nm are supported same as high speed measurements of up to 80,000 points in 130 milliseconds. Vibration isolation and a lateral measurement range up to 500 mm or more make the AOP the best solution for all kinds of measurement tasks.