Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.
Filter
Showing 577–600 of 1104 results
Chemically resistant, oil-free diaphragm vacuum pump features PTFE heads, PTFE-coated diaphragms, and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads.
Chemically resistant, oil-free diaphragm vacuum pump features PTFE heads, PTFE-coated diaphragms, and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads.
The Diaphragm Vacuum Pump is a chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications.
The Diaphragm Vacuum Pump is a chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications.
The Mini Diaphragm Vacuum Pump is a chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. It features a PPS head, PTFE-coated diaphragm and FFPM valves.
The Mini Diaphragm Vacuum Pump is a chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. It features a PPS head, PTFE-coated diaphragm and FFPM valves.
Independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit.
Independent control unit for any vacuum source. Features a touchscreen control, pressure sensors, and a two-step controlled valve. Optimizes lab bench space by allowing hands-free operation of the central vacuum unit.
Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors.
Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors.
All-glass assemblies are ideal for biodiesel testing, aggressive solvents, and applications where you need to minimize the materials that contact sample or filtrate. Filter holder mounts on filtration flask using a ground glass joint; order standa…
All-glass assemblies are ideal for biodiesel testing, aggressive solvents, and applications where you need to minimize the materials that contact sample or filtrate. Filter holder mounts on filtration flask using a ground glass joint; order standard 47-mm filter paper separately below.
For determining the material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. It can be used in the laboratory to measure the solid particle erosion of different materials and has been used as a scree…
For determining the material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. It can be used in the laboratory to measure the solid particle erosion of different materials and has been used as a screening test for ranking solid particle erosion rates of materials in simulated service environments
The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed …
The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed on screen in units of KOH/g and are also stored via internal data logger. Flexible data management options allow for export of readings to a PC or printer.
The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.
The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.
Baths feature PID microprocessor controller to deliver precise temperature control, with ASTM specified tolerances throughout the operating temperature range. Dual digital displays show set point time and actual temperature.
…Baths feature PID microprocessor controller to deliver precise temperature control, with ASTM specified tolerances throughout the operating temperature range. Dual digital displays show set point time and actual temperature.
Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane)…
Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D975); biodiesel B6 to B20 (Specification D7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D396); aviation turbine fuel (Specification D1655).
The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other produ…
The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel pressure vessel during testing.
Consists of two heat-transfer corrosion cells with temperature and pressure controls for evaluating engine coolant samples in accordance with ASTM D4340. Maintains aluminum alloy specimens at constant temperature in the presence of 500 mL samples….
Consists of two heat-transfer corrosion cells with temperature and pressure controls for evaluating engine coolant samples in accordance with ASTM D4340. Maintains aluminum alloy specimens at constant temperature in the presence of 500 mL samples. Each corrosion cell includes a borosilicate glass test cell, heat transfer bar, aluminum test specimen with thermocouple port, Type J thermocouple, 950W band heater, pressure gauge, pressure relief valve, stainless steel end plates with support rods, fill plug and o-rings, and acrylic safety shields. Digital temperature controllers maintain specimens at temperatures of up to 210 ± 1°C throughout the test period. Test cells are mounted on a finished steel base. Controls are housed in a separate finished steel cabinet.
Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0…
Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor.
Fully insulated, thermostatically controlled water bath with constant water level device. Use together with K25370 Bath Conversion Kit to immerse six 350mL test tubes for silver strip corrosion tests. Stainless steel inner wall and powder coated s…
Fully insulated, thermostatically controlled water bath with constant water level device. Use together with K25370 Bath Conversion Kit to immerse six 350mL test tubes for silver strip corrosion tests. Stainless steel inner wall and powder coated steel outer wall construction.
The sample is evaporated and condensed under controlled conditions, and observations are made of the temperatures at which various percentages are recovered and/or the percentages recovered at specific temperatures.
The Automatic Abel Flash Point Tester is used primarily to test flammable and combustible materials for shipping and safety regulations. The flash tester provides an increased temperature range of operation as compared with other testers, allowing…
The Automatic Abel Flash Point Tester is used primarily to test flammable and combustible materials for shipping and safety regulations. The flash tester provides an increased temperature range of operation as compared with other testers, allowing greater flexibility in testing samples according to the Abel test method. The unit provides a test range to 110°C and can be extended to –30°C by any appropriate external chiller.
Koehler Automated Flash Point Analyzers represent a perfect union of next-generation technology with traditional robust quality. The system software runs on an integrated processor PC running the latest Windows operating system.
Koehler Automated Flash Point Analyzers represent a perfect union of next-generation technology with traditional robust quality. The system software runs on an integrated processor PC running the latest Windows operating system.
The Automated Tag Closed Cup flash point tester ensures the accuracy and precision required according to the ASTM D56 and related test methods. The test sample is heated at a prescribed rate of temperature increase throughout the standard temperat…
The Automated Tag Closed Cup flash point tester ensures the accuracy and precision required according to the ASTM D56 and related test methods. The test sample is heated at a prescribed rate of temperature increase throughout the standard temperature test range to 100°C. The flash point tests are simply conducted by mounting the flash cup filled with sample into the test position and selecting a pre-programmed test method or the search mode to determine an approximate flash point. The automation routines provide accurate test results. Ignition by gas flame or electrical ignitor is included, along with safety cut-off devices. The measurement range can be extended to –30°C by any appropriate external chiller. Supervision software is included.
Rapid Tester® provides rapid determinations of flash point or sustained burning qualities by using a small sample. A flash/no flash test result is achieved in one minute for flash points below 212°F (100°C) with a 2mL sample.
Rapid Tester® provides rapid determinations of flash point or sustained burning qualities by using a small sample. A flash/no flash test result is achieved in one minute for flash points below 212°F (100°C) with a 2mL sample.
A complete system for conducting FIA analyses of a single or up to six samples simultaneously. Each system is complete with an upper multi-position air pressure manifold with independently-operated gauges, pressure regulators and ball O-ring joint…
A complete system for conducting FIA analyses of a single or up to six samples simultaneously. Each system is complete with an upper multi-position air pressure manifold with independently-operated gauges, pressure regulators and ball O-ring joints allowing for individual pressure control at each column. Each pressure regulator may be set at any point from 0-15 psi and will maintain the set pressure regardless of changes in back pressure.
This simple-to-use biodiesel GC system is ideal for the quantitative determination of free and total glycerin in B100 methyl esters by gas chromatography. The calibrated results are displayed directly, eliminating off-line calculations.
This simple-to-use biodiesel GC system is ideal for the quantitative determination of free and total glycerin in B100 methyl esters by gas chromatography. The calibrated results are displayed directly, eliminating off-line calculations.
Fully automatic bench top centrifuge designed expressly for petroleum testing applications. Features a 4-1/2” LCD touch screen control panel. This integrated touch screen can be used to turn the heat on and off, set the duration of the test, set…
Fully automatic bench top centrifuge designed expressly for petroleum testing applications. Features a 4-1/2” LCD touch screen control panel. This integrated touch screen can be used to turn the heat on and off, set the duration of the test, set the RCF/RPM values and choose the type of rotor assembly and corresponding glassware to be used during the test.
The Low Temperature Flow Tester, K95300, has been developed for testing lubricating greases in low temperature environments. The test is performed in accordance with DIN 51805 and can also be customized.
The Low Temperature Flow Tester, K95300, has been developed for testing lubricating greases in low temperature environments. The test is performed in accordance with DIN 51805 and can also be customized.
© DKSH International Ltd. All Rights Reserved.
test block for Laos
Please enter your details here:
<iframe src=”https://contactmarketing.dksh.com/l/992242/2024-07-21/37w9k“>
