Global Product Catalog

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filtered (568)
Filters
Search
  • Select Business Lines first
  • Select Business Lines first
Show (568)
Cancel

Showing 337–360 of 568 results

  • Idex - VHP Fittings - Reusable VHP Fittings

    Idex – VHP Fittings – Reusable VHP Fittings

    Our reusable VHP Fittings are capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over. They are pressure rated up to 25000psi making them ideal for UHPLC applications. They are designed for the most com…

    Our reusable VHP Fittings are capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over. They are pressure rated up to 25000psi making them ideal for UHPLC applications. They are designed for the most commonly used ports in UHPLC that being 10-32 threads for 1/16 inches outer diameter tubing and M4 threads for 1/32 inches outer diameter. They are manufactured from stainless steel and proprietary PEEK polymer blend (PK) ensuring strength and chemical compatibility.

    Learn MoreDone
  • Idex - VHP Fittings - Stainless Steel VHP Fittings

    Idex – VHP Fittings – Stainless Steel VHP Fittings

    These fittings are ideal for UHPLC applications. Our all Stainless-Steel VHP Fittings include a unique ferrule system with two compression points to provide twice the grip of a standard ferrule allowing pressure up to 30000psi. This design also al…

    These fittings are ideal for UHPLC applications. Our all Stainless-Steel VHP Fittings include a unique ferrule system with two compression points to provide twice the grip of a standard ferrule allowing pressure up to 30000psi. This design also allows the bite on the tubing to be less concentrated and does not restrict the inner diameter. The ferrules for 1/16 inches outer diameter tubing and 10-32 coned ports are two pieces, while the grooved ferrule for 1/32 inches outer diameter tubing and M4 coned ports is a one-piece design for easier handling, but it will act as two pieces with double compression on the tubing as it is tightened down.

    Learn MoreDone
  • Idex - VHP Fittings - VHP PK Fittings

    Idex – VHP Fittings – VHP PK Fittings

    Our UHPLC fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures. The VHP PK One-Piece fittings are available for 10-32 coned, 6-32 coned, or M4 coned po…

    Our UHPLC fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures. The VHP PK One-Piece fittings are available for 10-32 coned, 6-32 coned, or M4 coned ports, and Two-Piece fittings are available to connect either 1/16 inches or 1/32 inches outer diameter tubing into 10-32 coned ports in multiple styles. VHP MicroFerrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments. The new high pressure MicroFerrules are available for use with 1/32 inches or 360 μm outer diameter tubing, and they are incorporated into several of our VHP products for capillary tubing.

    Learn MoreDone
  • Idex – Fluidic Tubing Sleeves – 1/16 Inches Outer Diameter PEEK Tubing Sleeves

    Idex – Fluidic Tubing Sleeves – 1/16 Inches Outer Diameter PEEK Tubing Sleeves

    Like the NanoTight™ FEP Sleeves, these PEEK Tubing Sleeves are designed to be used with 1/16 inches outer diameter, 10-32 threaded fittings to adapt capillary tubing to standard coned ports. They are designed to withstand higher pressure than th…

    Like the NanoTight™ FEP Sleeves, these PEEK Tubing Sleeves are designed to be used with 1/16 inches outer diameter, 10-32 threaded fittings to adapt capillary tubing to standard coned ports. They are designed to withstand higher pressure than the FEP sleeves. Made of PEEK polymer, these 1.3 inches long sleeves can be used up to 125 °C. These sleeves require a wrench tightened nut to achieve proper sealing. We recommend the F-140 Two-Piece Fingertight Fitting, which includes a PEEK ferrule or the hex-head SealTight™ fittings. Many researchers also use a stainless steel nut and ferrule with these sleeves, such as our U-400 and U-401.

    Learn MoreDone
  • Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter FEP Tubing Sleeves

    Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter FEP Tubing Sleeves

    Our FEP tubing sleeves are an excellent choice for lower pressure applications. These 1.6 inches long sleeves facilitate connecting capillary tubing into ports designed for 1/32 inches outer diameter tubing. We offer a wide selection of appropriat…

    Our FEP tubing sleeves are an excellent choice for lower pressure applications. These 1.6 inches long sleeves facilitate connecting capillary tubing into ports designed for 1/32 inches outer diameter tubing. We offer a wide selection of appropriate sleeve for your capillary outer diameter size. These sleeves can be used at up to 50 ºC and have a pressure rating of 1,750 psi (121 bar).

    Learn MoreDone
  • Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter PEEK Tubing Sleeves

    Idex – Fluidic Tubing Sleeves – 1/32 Inches Outer Diameter PEEK Tubing Sleeves

    Our 1/32 inches outer diameter PEEK Tubing Sleeves is designed to be used with any fitting made for 1/32 inches outer diameter tubing when smaller tubing must be connected. It is 1.6 inches in length. Select the appropriate sleeve from the product…

    Our 1/32 inches outer diameter PEEK Tubing Sleeves is designed to be used with any fitting made for 1/32 inches outer diameter tubing when smaller tubing must be connected. It is 1.6 inches in length. Select the appropriate sleeve from the product listing for your capillary tubing OD size. The 1/32 inches outer diameter PEEK Tubing Sleeves have a maximum recommended temperature of 125 ºC and have a pressure rating of 5,000 psi (345 bar).

    Learn MoreDone
  • JAI ( Japan Analytical Industry Co.,Ltd) – JFC 5000 Cryogenic sample crusher

    JAI ( Japan Analytical Industry Co.,Ltd) – JFC 5000 Cryogenic sample crusher

    JFC 5000 Cryogenic sample crusher

    JFC 5000 Cryogenic sample crusher

    Learn MoreDone
  • JAI ( Japan Analytical Industry Co.,Ltd) – JHI 08 Hybrid Pyrolyzer for GC/MS

    JAI ( Japan Analytical Industry Co.,Ltd) – JHI 08 Hybrid Pyrolyzer for GC/MS

    JAI JHI-08 Hybrid Pyrolyzer for GC/MS

    JAI JHI-08 Hybrid Pyrolyzer for GC/MS

    Learn MoreDone
  • JAI ( Japan Analytical Industry Co.,Ltd) – Outgas collector

    JAI ( Japan Analytical Industry Co.,Ltd) – Outgas collector

    JAI Outgas collectors

    JAI Outgas collectors

    Learn MoreDone
  • JAI ( Japan Analytical Industry Co.,Ltd) – Recycling Preparative HPLC

    JAI ( Japan Analytical Industry Co.,Ltd) – Recycling Preparative HPLC

    JAI Recycling Preparative HPLC

    JAI Recycling Preparative HPLC

    Learn MoreDone
  • Kirsch - Medical Cooling

    Kirsch – Medical Cooling

    KIRSCH is the market leader for pharmaceutical refrigerators in Germany. Each refrigerator is particularly made to meet the demanding DIN 58345 regulation. Our products are market leading in temperature stability and quality.

    KIRSCH is the market leader for pharmaceutical refrigerators in Germany. Each refrigerator is particularly made to meet the demanding DIN 58345 regulation. Our products are market leading in temperature stability and quality.

    Learn MoreDone
  • Kirsch – Blood Bank Refrigerators

    Kirsch – Blood Bank Refrigerators

    All KIRSCH Blood Bank Refrigerators offer you the best possible variant for the storage of your banked blood. All refrigerators are made of a robust housing, thick insulation, easy-to-maintain interior container, forced-air cooling, automatic defr…

    All KIRSCH Blood Bank Refrigerators offer you the best possible variant for the storage of your banked blood. All refrigerators are made of a robust housing, thick insulation, easy-to-maintain interior container, forced-air cooling, automatic defrosting, etc.

    Learn MoreDone
  • Kirsch – Blood Plasma Freezer

    Kirsch – Blood Plasma Freezer

    KIRSCH is the market leader for pharmaceutical refrigerators and freezers in Germany. Each freezer is particularly made to meet the demanding DIN 58345 regulation. Kirsch products are market leading in temperature stability and quality.

    KIRSCH is the market leader for pharmaceutical refrigerators and freezers in Germany. Each freezer is particularly made to meet the demanding DIN 58345 regulation. Kirsch products are market leading in temperature stability and quality.

    Learn MoreDone
  • Kirsch FROSTER-LABEX - Explosion Proof Laboratory Freezers

    Kirsch FROSTER-LABEX – Explosion Proof Laboratory Freezers

    Tested and certified independently by TÜV-SÜD: LABEX®-Laboratory Freezers with re-circulating air cooling are intrinsically safe according to the ATEX 95 directive. Each component in the interior compartment (ventilators, sensors) is particular…

    Tested and certified independently by TÜV-SÜD: LABEX®-Laboratory Freezers with re-circulating air cooling are intrinsically safe according to the ATEX 95 directive. Each component in the interior compartment (ventilators, sensors) is particularly shielded to avoid sparks even when malfunction occur. Your advantage: Complete explosion-proofing and maximum temperature consistency.

    Learn MoreDone
  • Koehler - Advantec All-Glass Filtration Assemblies

    Koehler – Advantec All-Glass Filtration Assemblies

    All-glass assemblies are ideal for biodiesel testing, aggressive solvents, and applications where you need to minimize the materials that contact sample or filtrate. Filter holder mounts on filtration flask using a ground glass joint; order standa…

    All-glass assemblies are ideal for biodiesel testing, aggressive solvents, and applications where you need to minimize the materials that contact sample or filtrate. Filter holder mounts on filtration flask using a ground glass joint; order standard 47-mm filter paper separately below.

    Learn MoreDone
  • Koehler - Air Jet Erosion Tester

    Koehler – Air Jet Erosion Tester

    For determining the material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. It can be used in the laboratory to measure the solid particle erosion of different materials and has been used as a scree…

    For determining the material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. It can be used in the laboratory to measure the solid particle erosion of different materials and has been used as a screening test for ranking solid particle erosion rates of materials in simulated service environments

    Learn MoreDone
  • Koehler - Aquamax Total Acid Number (TAN) Titrator

    Koehler – Aquamax Total Acid Number (TAN) Titrator

    The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed …

    The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed on screen in units of KOH/g and are also stored via internal data logger. Flexible data management options allow for export of readings to a PC or printer.

    Learn MoreDone
  • Koehler - Benchtop EDXRF Elemental Analyzer

    Koehler – Benchtop EDXRF Elemental Analyzer

    The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.

    The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.

    Learn MoreDone
  • Koehler - Constant-Temperature Viscosity Bath

    Koehler – Constant-Temperature Viscosity Bath

    Baths feature PID microprocessor controller to deliver precise temperature control, with ASTM specified tolerances throughout the operating temperature range. Dual digital displays show set point time and actual temperature.

    …

    Baths feature PID microprocessor controller to deliver precise temperature control, with ASTM specified tolerances throughout the operating temperature range. Dual digital displays show set point time and actual temperature.

    Learn MoreDone
  • Koehler - Corrosion Tester - Accelerated Iron Corrosion Tester

    Koehler – Corrosion Tester – Accelerated Iron Corrosion Tester

    Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane)…

    Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D975); biodiesel B6 to B20 (Specification D7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D396); aviation turbine fuel (Specification D1655).

    Learn MoreDone
  • Koehler - Corrosion Tester - Copper Strip Corrosion Tester

    Koehler – Corrosion Tester – Copper Strip Corrosion Tester

    The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other produ…

    The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel pressure vessel during testing.

    Learn MoreDone
  • Koehler - Corrosion Tester - Dual Corrosion Tester

    Koehler – Corrosion Tester – Dual Corrosion Tester

    Consists of two heat-transfer corrosion cells with temperature and pressure controls for evaluating engine coolant samples in accordance with ASTM D4340. Maintains aluminum alloy specimens at constant temperature in the presence of 500 mL samples….

    Consists of two heat-transfer corrosion cells with temperature and pressure controls for evaluating engine coolant samples in accordance with ASTM D4340. Maintains aluminum alloy specimens at constant temperature in the presence of 500 mL samples. Each corrosion cell includes a borosilicate glass test cell, heat transfer bar, aluminum test specimen with thermocouple port, Type J thermocouple, 950W band heater, pressure gauge, pressure relief valve, stainless steel end plates with support rods, fill plug and o-rings, and acrylic safety shields. Digital temperature controllers maintain specimens at temperatures of up to 210 ± 1°C throughout the test period. Test cells are mounted on a finished steel base. Controls are housed in a separate finished steel cabinet.

    Learn MoreDone
  • Koehler - Corrosion Tester - Lead Corrosion Apparatus

    Koehler – Corrosion Tester – Lead Corrosion Apparatus

    Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0…

    Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor.

    Learn MoreDone
  • Koehler - Corrosion Tester - Silver Corrosion Test Apparatus

    Koehler – Corrosion Tester – Silver Corrosion Test Apparatus

    Fully insulated, thermostatically controlled water bath with constant water level device. Use together with K25370 Bath Conversion Kit to immerse six 350mL test tubes for silver strip corrosion tests. Stainless steel inner wall and powder coated s…

    Fully insulated, thermostatically controlled water bath with constant water level device. Use together with K25370 Bath Conversion Kit to immerse six 350mL test tubes for silver strip corrosion tests. Stainless steel inner wall and powder coated steel outer wall construction.

    Learn MoreDone