The air can be a serious contamination source, it is therefore essential for your lab to regularly evaluate the quality of the environment. Validated by the Health Protection Agency (HPA, UK), SAMPL’AIR™ is a high efficiency microbial air sampler with a microorganism collection rate of 99, even with the smallest particles. It is the ideal solution if you wish to regularly perform thorough air quality control.

Mass spectrometry (MS) is an analytical technique for determining the elemental composition of a sample. The MS principle consists of ionizing chemical compounds to generate charged molecules and to measure their mass-to-charge ratio.

Fully automated microbial identification system increased productivity & safety, full traceability and rapid results. VITEK® 2 Compact includes an extended identification database, which enables you to detect a larger range of microorganisms. All identification stages from reading to the recording of results are automated, optimizing workflow. As the system operates with bar-coded cards, full traceability is ensured and the risk of transcription errors is minimized. The efficiency of the VITEK® 2 Compact system relies on the advanced colorimetry technology: the system reads the latest generation VITEK®test cards – containing 64 wells to ensure accuracy – every 15 minutes using three different wavelengths. With this technique, more data is analyzed, which increases results accuracy. With this system, both set-up and response time are reduced – time to result from 2 to 18 hours . VITEK® 2 Compact software is extremely intuitive and therefore requires less technician training, which results in higher productivity.

Upgradeable Plate Readers 

The Omega Plate Reader Series offers true flexibility to provide you with the perfect reader to fulfill your requirements: from an absorbance-only SPECTROstar or luminescence-only LUMIstar to a fully equipped FLUOstar Omega. Your chosen instrument can also be upgraded at any time if you need more features or additional detection modes.

The CLARIOstar Plus is a multi-mode microplate reader with advanced LVF Monochromators™, highly sensitive filters, and an ultra-fast UV/vis spectrometer. The Enhanced Dynamic Range and automatic focus technologies make manual settings superfluous and detection optimisation easier than ever.

Atmospheric Control Unit, temperature incubation, multiple shaking, well scan and reagent injectors make the CLARIOstar Plus the ideal platform for any live cell-based assay.

Key Features

• Innovative monochromators for increased sensitivity
• Fully-flexible wavelengths and bandwidths
• Spectral scanning in ABS, FI and LUM
• Largest dynamic range with no manual intervention
• Rapid full-plate autofocus
• Dedicated features for live cell-based assays
• Ultra-fast data sampling (100 measurements/second)
• Dedicated laser for Alpha Technology
• Easily integrated into automated systems

SPECTROstar Nano 

The SPECTROstar Nano is equipped with BMG LABTECH’s ultra-fast UV/vis spectrometer, which allows users to measure full-spectrum absorbance (220 – 1000 nm) in less than 1 second per well. It is the ideal instrument to read all absorbance assays in a microplate or cuvette – with many common assay protocols predefined and available at the click of the mouse.

VANTAstar 

The VANTAstar is an upgradable multi-mode microplate reader compatible with all plate formats up to 384 wells. The Enhanced Dynamic Range (EDR) technology, a fast full-plate auto-focus, and luminescence crosstalk reduction make assay detection easier than ever and manual optimization superfluous.

With its Atmospheric Control Unit for gas control, temperature incubation, multiple shaking options, well scan and reagent injectors with heater and stirrer, the VANTAstar supports all live cell-based assays. The VANTAstar is also available with only filter-based detection. Check here for more details about the VANTAstar F.

The most popular Brookfield viscometer now measures gel time using unique magnetic coupling that attaches the glass rod to instrument. When gel time is reached, display shows both gel time and equivalent viscosity value. Glass rod is quickly and easily detached from instrument.  Integrated temperature probe provides peak exotherm data if needed.

Gel Timer DV2T comes with glass measurement rod, compression-fit glass rod adapter, lab stand with adjustable stop for quickly positioning glass rod at proper immersion depth in test sample, and temperature probe. Test method can be run either manually or using program stored in instrument memory. Accuracy and reliability of Gel Timer DV2T make this instrument the preferred choice in QC for measuring gel coats, resins, and potting compounds. Viscosity data generated during the test may also prove helpful for complete characterization of material flow behavior.

Packs of 10 glass rods are available; use part number GT-1010. Spare magnetic couplings can be retrofit to existing viscometers; use part number GT-2000.

The DV2T Gel-Timer instrument can also be used as a standard rotational viscometer with the purchase of any standard viscometer spindle set or measurement accessory and carries all of the same viscometry functions as a standard DV2T.

Brookfield provides a variety of viscosity measurement and control systems used throughout the world for many different applications.

Ease of use, flexibility, reliable performance and quality of service have made Brookfield Laboratory Viscometers favorites all over the world.

Each of our standard Laboratory Viscometers/ Rheometers are supplied with an internal spring used to calculate the viscosity of a material. These springs have different measuring capabilities:

• LV is for low viscosity materials and can measure the thinnest materials. Typical examples include inks, oils, and solvents.
• RV is for medium viscosity materials than those measured with an LV torque. Typical examples include creams, food, and paints.
• HA is for higher viscosity materials than those measured with an RV torque. Typical examples include gels, chocolate and epoxies.
• HB is for even higher viscosity materials than those measured with an HA torque spring. Typical examples include asphalt, caulking compounds, and molasses.

The PFT Powder Flow Tester delivers quick and easy analysis of powder flow behavior in industrial processing equipment. It is ideal for manufacturers who process powders daily and want to minimize or eliminate downtime and expense that can occur when hoppers discharge erratically or fail to discharge altogether.

To measure viscosity at a controlled shear rate, at a controlled shear stress or to make a direct yield stress measurement, Brookfield has a Rheometer to meet your need.

The Brookfield CT3 Texture Analyzer is a powerful universal testing machine that offers both compression and tensile testing at a much lower price than other testers in its class.

Now available, our New CTX Texture Analyzer is an advanced model for compression and tension testing of materials.  It allows quick, efficient testing for busy labs that need to improve productivity while maintaining quality.

Raman imaging is an incredibly effective tool to create detailed chemical images based on a sample’s Raman spectra. In these images, every pixel is composed of a complete Raman spectrum. By interpretation of this spectral data, a false color image can be rendered to emphasize and characterize the sample’s properties like chemical structure or composition. The SENTERRA II features comprehensive Raman imaging as well as mapping capabilities, to analyze and generate chemical images. Meanwhile, the intelligent software supports you when needed and saves a time consuming and overcomplex interface for setting parameters. Our data acquisition was designed to be as efficient as possible and in combination with the precise sample stage Raman images are produced in a matter of seconds.

The LUMOS II takes FTIR microscopy to the next level by making it faster, easier, more accurate and reliable. We accomplished this by tailoring its software and user interface specifically to the user. Beginners get perfect results in no time, while experts are given almost unlimited possibilities. The LUMOS II offers exclusive FPA imaging technology, that naturally exceeds the speed and spatial resolution of line array and single-point measurements. Its applicability is enormous, the spectral data obtained always of the highest quality and the measurement times are very short.

The S2 POLAR masters all requirements for S analysis from diesel to crude oils. This also includes continuous process control of higher sulfur levels in refineries as well as norm-compliant Ultra-Low Sulfur (ULS) analysis of final products.

The S2 POLAR complies with the international S norms such as ASTM D7220, D4294, and ISO 13032.

With its capability to measure multiple elements simultaneously, including important elements in process control such as Ni, V, Fe and CI, the S2 POLAR is well suited for the analytical demands of refineries in one single instrument.

The S2 POLAR is also well suited for the norm-compliant analysis of additives in lubricating oils according to ASTM D6481 and ASTM D7751 that includes the elements Mg, P, S, Cl, Ca, Zn, and Mo. Furthermore this also includes the analysis of elements in edible oils or palm oils.

Fast – Next generation SDD and 50 Watt Power

A high-power (50 W), long-life-time X-ray tube combined with closely coupled optics and the new HighSense™ detectors is the basis for unrivalled EDXRF performance.

Intuitive – SPECTRA.ELEMENTS

Next generation software based on state-of-the-art programming combines functionality with ease-of-use for a smooth and worry-free operation.

Versatile – Optimal configuration for every need

Depending on sample type and desired throughput, the versions Single, XY Autochanger, Carousel, Automation, and Mapping-Stage cover all possible scenarios.

High-Capacity 3D X-ray Microscopy

The SKYSCAN 1273 is Bruker’s latest benchtop 3D X-ray microscope based on micro computed tomography (Micro-CT) technology. Samples with up to 500 mm length, 300 mm diameter, and a maximum weight of 20 kg can be accommodated, a new standard for non-destructive testing (NDT) with benchtop instruments. Best-in-class components turn the SKYSCAN 1273 into a real power pack. The combination of a high-energy X-ray source running at high power and a large format flat-panel detector with ultimate sensitivity and speed provides excellent image quality in just a few seconds.

The comprehensive software for straightforward data collection, advanced image analysis, and powerful visualization makes the SKYSCAN 1273 an easy to use 3D X-ray microscope.

The SKYSCAN 1273 benchtop 3D X-ray microscope requires minimum lab space, is easy to start running, and virtually maintenance-free. Consequently, the SKYSCAN 1273 offers high system uptime with low cost of ownership.