Germany Piller Entgrattechnik GmbH

Alternating operation of the loading and processing chamber, simple control system, heavy-duty machine for medium to large volumes of straightforward components.

Separate high-pressure generating units for water and cutting oil, capable of raising pressure to between 400 and 1100 bar and suitable for installation in tight spaces. Integral filter systems adapted to individual component requirements, allowing efficient recycling of the processing medium and the removal of dirt particles with a high degree of reliability even in the case of high contamination levels.

Processing centre based on the rotary transfer principle. Vertical or horizontal nozzle configuration. The machine is suitable for both manual and automatic loading. This guarantees fast cycle times for small parts.

All-in-one processing centre featuring an integral handling system and lightweight design. Large-scale cartesian gantry for integration of separate conveyor belts for clean and contaminated components, as well as auxiliary systems, such as component marking devices. Small, hermetically sealed blasting chamber with fixed nozzle configuration.

Processing centre featuring an integral handling system and lightweight design. Linear gantry allowing integration of separate conveyor belts for contaminated and clean components. Machine housing encloses the infeed and discharge belts. The component remains in the handling gripper during processing and is conveyed to the nozzles.

Vertical processing centre featuring rotary plate (B-axis) for workpiece, incl. clamping device, application-specific nozzle configuration, and automatic side-loading mechanism (where applicable). Straightforward clamp changing, excellent accessibility, optimum sound insulation.

Large horizontal processing centre with high-speed swivel table and bulkhead. The swivel table is fitted with two rotary plates (B-axes), separated by means of a dividing wall, thus creating separate loading and processing chambers. Processing can be performed along up to three horizontal axes using a variety of nozzle configurations. Suitable for medium serial production involving multiple clamping, as well as for very large or heavy parts, with the additional option of overhead loading via crane or gantry.

NC water jet centre based on a dual-chamber system for the alternating processing of camshafts. In this particular case, processing is carried out using cutting oil, but the machine can easily be adapted for use with water. The machine can be loaded manually and is suitable for fully automated, interlinked processes. The VectorJet IV consists of a high-pressure pump unit and processing centre housed within a single structure requiring minimal space.