Gecam

The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two chamfers on both sides of the piece in one pass, ensuring a significant reduction in processing times. It consists of a cabinet base, which can hold spare abrasive belts and any accessories and is equipped with four swivel wheels, two of which with brakes. Variable speed conveyor belt unit, which can be tilted up to 30 ° to facilitate the insertion and alignment of the pieces during automatic processing. The speed of the conveyor belt can be read on a display directly in meters / minute and can be varied by acting on the appropriate potentiometer.

For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Deburring Machines: GT06 Sanding Deburring Machine,  GCB Sanding Deburring Machine, GE30 Belt Deburring Machine, GE60 RX Finishing Deburring Machine and Stiffelio G11 Sanding Deburring Machine.

For 25 years GECAM has been developing and manufacturing machines for grinding, satin finishing, deburring and finishing of sheet metal. Pursuing as the founding value of its production the attention to the quality of the 100% Italian material, over the years it has been able to become a reference production reality for the sector.

The highly qualified staff allows a constant development of the production for the primary objective of satisfying the customer’s needs. The high quality guaranteed by an entirely local production and an efficient and punctual service allows GECAM to establish itself on the world market boasting 75% of total export sales compared to 25% on the national territory.

Machine designed for cleaning edges of sheet metal strips with width from 30 to 450 mm and thickness from 0.5 to 4 mm, with separate electrical system. Two front heads with crossed free belt that work simultaneously and break the corner both above and below, two horizontal rear heads with belt on contact wheel to ensure satin finishing. The piece slides on a series of rollers with adjustable springs which can be opened using a digital tool. Heads individually adjustable through a special handwheel to ensure adequate contact of the tape on the piece.