KOPEL – Cell Setter – KSJ-026
The KOPEL KSJ-026 cell setter employs a self-alignment mechanism that enables high accuracy of ±0.05 mm to ensure stable probing of PV cells to be measured, thus achieving high repeatability of the measured data.
Available in :
It is mounted with two dial gauges to precisely set and control the contact pressure of probe pins. In addition, the KSJ-026 cell setter is provided with a cell vacuum contact function and cell temperature control function to easily reproduce measurement conditions and stabilize the FF values.
Key Features
- Two dial gauges that allow precise setting and control of the contact pressure of the probe pins, thus enabling easy reproduction of the measurement conditions
- A cell alignment mechanism with high accuracy of ±0.05 mm that ensures stability of the parallelism for probing and stable reproduction of the measurement conditions
- A probe bar with a very thin but strong bar structure to minimize the shadow of the bar created by the simulated sunlight *1)
- Use of the four-wire, low-resistance measurement
- Highly durable probe pins capable of withstanding at least 1 million contacts
- A cell sample plate that can circulate water at temperatures ranging from 10 to 80˚C, thus allowing evaluation of the cell temperature characteristics *2)
- A top-opening design for easy loading/unloading of PV cells
- Probing of each cell can be completed with a single action
- A cell vacuum contact function is provided as a standard feature *3)
- A thermocouple for measuring cell temperature is provided as a standard feature
- A Pt100 sensor is provided to measure the temperature of cell sample plate as a standard feature
- Top/bottom probe available for 2, 3, and 4 bus bars
- Supported sizes of the cells to be measured: 50-mm square through 4-, 5-, and 6-inch square
- Sample plate height of 170 mm, adjustable within approx. 30 mm
For further information, we invite you to contact us and have a look on the catalog, here attached.
You will find details on the different existing models of cell setters:
- The thickness of the standard probe bar is 1.5 mm. The probe bar with a thickness of 0.5 mm is available as an option.
- The water circulation unit is available as an option.
- The vacuum pump is available as an option.
- Both Side contacts (BS type)
- Surface Plate contacts (SP type)
- Electrical Potential Distribution (EPD type)
- Back Contact (BC type)
Key Industries
- Semiconductor, Solar and Electronics
- Electronics
- Energy
Kyoshin Electric Co., Ltd., develops and manufactures a series of leading-edge optoelectronics products as KOPEL brand in a global scale….
