XSYS – rotecĀ® Sleeves
rotecĀ®Ā sleeves have been in use around the world since 1990. With outstanding innovations and a continuous improvement process of sleeve technology, cost efficiency, service and ecological responsibility, rotecĀ®Ā sleeves became the number one in terms of effectiveness, reliability and convenience in daily practice.
Available Models
Technical Specifications
| Field of application | Mid-web / Wide-web / Pre-Print |
| Wall thickness | 0.9 mm – 125 mm |
| Length | 250 mm – 2600 mm |
| Outer diameter tolerance | +/- 0.02 mm |
| Total indicated run-out (TIR) tolerance | +/- 0.02 mm (measured on carrier cylinder at TIR ā¤ 0.005 mm |
| Length tolerance | DIN ISO 2768 T1c |
The Benchmark in Plate Mounting Sleeves
Product Overview
- Available with rotecĀ® Ī© Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Superior service life and outstanding durability
- Consistent and long-lasting mounting and clamping characteristics
- Easy and reliable handling
Technical Specifications
| Field of application | Mid-web / Wide-web / Pre-Print |
| Wall thickness | 7.5 mm – 125 mm |
| Length | 250 mm – 2400 mm |
| Outer diameter tolerance | +/- 0.02 mm |
| Total indicated run-out (TIR) tolerance | +/- 0.02 mm (measured on carrier cylinder at TIR ā¤ 0.005 mm) |
| Length tolerance | DIN ISO 2768 T1c |
Bounce Reduction for Top Printing Speeds With Superior Dimensional Stability
Product Overview
- These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.
- These products are an advantage for the press operator by being easier to handle. This comes from reduced weightand easier mounting properties.
- New easy-mount technology was developed for these products using advanced materials and state-of-the-art sleeve construction to make mounting easier for the press operator
- These products are ideal for high-speed applications because the construction and materials of these sleeves provide bounce reduction properties.
- Available with rotecĀ® Ī© Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Weight optimized with up to 25% reduced weight compared to rotecĀ® Blue Light Sleeve
- Newly developed easy-mount technology
- Specialized sleeve construction for bounce reduction and faster press speeds
- Superior dimensional stability for long-lasting, consistent register accuracy
Technical Specifications
| Field of application | Mid-web / Wide-web / Pre-Print |
| Wall thickness | 30 mm – 125 mm |
| Length | 600 mm – 2400 mm |
| Outer diameter tolerance | +/- 0.02 mm |
| Total indicated run-out (TIR) tolerance | +/- 0.02 mm (measured on carrier cylinder at TIR ā¤ 0.005 mm) |
| Length tolerance | DIN ISO 2768 T1c |
Easier Handling With Superior Dimensional Stability
Product Overview
- These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.
- These products are an advantage for the press operator by being easier to handle. This comes from reduced weightand easier mounting properties.
- Available with rotecĀ® Ī© Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Weight optimized with up to 50% reduced weight compared to rotecĀ® Blue Light Sleeve
- New lightweight polyurethane intermediate layer
- Superior dimensional stability for long-lasting, consistent register accuracy
- End plate sleeve edge sealing for long lasting protection
Technical Specifications
| Field of application | Mid-web / Wide-web |
| Wall thickness | 2.9 mm – 125 mm |
| Length | 250 mm – 2500 mm |
| Outer diameter tolerance | #ERROR! |
| Total indicated run-out (TIR) tolerance | #ERROR! |
| Length tolerance | DIN ISO 2768 T1c |
Unique Compressibility
Product Overview
- These products have a compressible outer surface for optimized printability.
- Available with rotecĀ® Ī© Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Long-lasting compressibility, does not collapse with use
- Plate and tape savings, print consistency with long print runs
- Low dot gain, best solid ink density on irregular substrates
Technical Specifications
| Field of application | Offset |
| Repeats | 92.426 mm cylinder – all repeats from 381 mm – 762 mm / 152.905 mm cylinder – all repeats from 603 mm – 1143 mm / Special sizes upon request |
| Wall thickness (Offset Plate Sleeve) | 14.5 mm – 106 mm |
| Wall thickness (Offset Blanket Sleeve) | 12.4 mm – 106 mm |
| Length | 92.426 mm cylinder – 566 mm / 906 mm |
| 152.905 mm cylinder – 1166 mm / 1306 mm | |
| Further lengths available upon request | |
| Outer diameter tolerance | +/- 0.02 mm |
| Total indicated run-out (TIR) tolerance | +/- 0.02 mm (measured on carrier cylinder at TIR ā¤ 0.005 mm) |
| Length | DIN ISO 2768 T1c |
Unique Durable Construction
Product Overview
- These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.
Benefits
- Offset plate and blanket sleeve set specifically designed for web offset presses
- Allows extremely quick format changes for all repeat sizes
- Highest dimensional stability due to special inner construction
- Highest durability at high temperatures and torque forces
- Perfect resistance to UV inks and solvents
Technical Specifications
| Field of application | Offset |
| Repeats | 92.426 mm cylinder – all repeats from 381 mm – 762 mm / 152.905 mm cylinder – all repeats from 603 mm – 1143 mm / Special sizes upon request |
| Wall thickness (Offset Plate Sleeve) | 14.5 mm – 106 mm |
| Wall thickness (Offset Blanket Sleeve) | 12.4 mm – 106 mm |
| Length | 92.426 mm cylinder – 566 mm / 906 mm |
| 152.905 mm cylinder – 1166 mm / 1306 mm | |
| Further lengths available upon request | |
| Outer diameter tolerance | +/- 0.02 mm |
| Total indicated run-out (TIR) tolerance | +/- 0.02 mm (measured on carrier cylinder at TIR ā¤ 0.005 mm) |
| Length | DIN ISO 2768 T1c |
Extremely Durable
Product Overview
- These products are an advantage for the press operator by being easier to handle. This comes from reduced weightand easier mounting properties.
- Available with rotecĀ® Ī© Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Optimal stability with low weight
- Robust and durable over long time period
- Fibreglass for perfect bonding characteristics with different coating materials
Technical Specifications
| Wall thickness | 0.8 mm |
Sleeve To Protect Products With High-End Surfaces
Product Overview
- These products are an advantage for the press operator by being easier to handle.
Benefits
- Protection of anilox and other valuable products during storage and transport
- Rubber ring on the end to hold the cover sleeve in place
- Extra long life due to excellent durability
Brand
XSYS ā rotec is the specialist for the global flexographic printing industry. With plates, sleeves, adapters, know-how and our worldwide service network we support our customers in the printing and the packaging industry. All our commitment and developments have one goal: brilliant results. And that in more than one way. First we stand for brilliant products that provide our customers with high-quality printing results. At the same time, we ensure the efficient use of resources and thus successful business.
Similar Products
