Idex – Sensors – Pressure Sensors
Immediately detect blockages and mitigate risk before important samples are compromised with modular QuickStart™ Pressure Sensors from IDEX Health & Science. Meticulously engineered and broadly tested for precision sensing, our premium Pressure Sensors continually monitor system parameters to provide you the information you need to keep your instrument operating reliably. Pressure Sensors connect in-line to your system easily, with minimal solution carryover and bubble trapping.
Available Models
| Operating Voltage | 5.0V |
|---|---|
| Digital Communication Bus | 12C |
| Accuracy Below Full Scale | Less than 1% full scale |
| Recommended Max Pressure | 400 psi |
| Burst Pressure | 800 psi (56 bar abs) |
| Wetted Materials | PEEK Housing, Viton O-ring, 315L SS |
| Ambient Storage Temperature | -30 – +100°C |
| Operating Temperature | +5 – +50°C |
| Pressure Detection Response Time | 67 ms |
Our new QuickStart™ pressure sensor is an in-line, modular, compact sensor that you can easily implement into your fluidic pathway to mitigate risk of potential blockages to your instrument. Easily manage your flow rates and receive accurate, instantaneous data on system performance — saving critical analysis time.
- QuickStart™ Pressure Sensor Stand Alone Fitting, Full Scale Pressure 200 psi (14 bar) – 1 unit
| Operating Voltage | 5.0V |
|---|---|
| Digital Communication Bus | 12C |
| Accuracy Below Full Scale | Less than 1% full scale |
| Recommended Max Pressure | 400 psi |
| Burst Pressure | 800 psi (56 bar abs) |
| Wetted Materials | PEEK Housing, Viton O-ring, 315L SS |
| Ambient Storage Temperature | -30 – +100°C |
| Operating Temperature | +5 – +50°C |
| Pressure Detection Response Time | 67 ms |
The new QuickStart™ pressure sensor is an in-line, modular , compact sensor that you can easily implement into your manifold rather than used as a stand-alone on your instrument.
- QuickStart™ Pressure Sensor Manifold Option, Full Scale Pressure 200psi (14 bar) – 1 unit
- QuickStart™ Pressure Sensor Manifold Option, Full Scale Pressure 200psi (14 bar) – Pack of 10 units
| Operating Voltage | 5.0V |
|---|---|
| Digital Communication Bus | 12C |
| Accuracy Below Full Scale | Less than 1% full scale |
| Recommended Max Pressure | 400 psi |
| Burst Pressure | 800 psi (56 bar abs) |
| Wetted Materials | PEEK Housing, Viton O-ring, 315L SS |
| Ambient Storage Temperature | -30 – +100°C |
| Operating Temperature | +5 – +50°C |
| Pressure Detection Response Time | 67 ms |
The new QuickStart™ pressure sensor evaluation kit comes with everything you need to test a sensor in a short amount of time. Included in the kit is a sensor, cables, USB adapter and memory stick (includes software).
- QuickStart™ Pressure Sensor Evaluation Kit, Full Scale Pressure 200 psi (14 bar)
- QuickStart™ M6 Pressure Sensor Evaluation Kit, Full Scale Pressure 200 psi (14 bar)
Key Industries
- Biopharmaceutical and Biotechnology
- Chemical
- Cosmetics & Personal Care
- Education & Academics
- Food & Beverage
- Medical
- Oil & Gas
- Pharmaceutical
- Powders & Pigments / Coating
IDEX Health & Science is the global authority in fluidics and optics, bringing life to advanced optofluidic technologies with our…
