AccuLiFT™ is an automatic reel storage system using the traditional Vertical Lift Module (VLM) design concept to achieve high storage capacity while minimize machine foot print. A person is no longer required to manually feed the reel storage system one at a time or manually load reel pallet one reel at a time. All the users need to do is to stack 30-100 reels onto multiple stacking units and the robotic arm will pick up the reels from the stackers and place them into the storage system. The storage system is designed with a double pallets in/out buffer for loading and unloading so while the robot is working on one pallet, the extractor will store and retrieve parts for the next pallet.

Maximum storage capacity of 8,300 reels of SMT component reels represents the highest density in component storage system today. Automatic barcode reader identifies each reel before it is put away into the system to maintain accurate inventory. Also included are Barcode label applicator on output side and Flexible software for MES integration. Users can drastically reduce component kitting time and still maintain inventory accuracy.

Key Features

• Fully Automatic
• Very High Storage Density with Very Small Foot Print
• Easy Reel Size and Thickness Re-configuration by user
• Reel output sorting built into the system
• Modular Design for easy transportation
• No Calibration Direct Drive System design(patent pending)

Achilles offers a full range of wafer carriers models depending on the wafer types, all using antistatic and high-purity material, and compatible with packing machines:

– Protos Carrier MA series Improve the shipping efficiency, 25 wafers of capacity. Can be used with spacers or rings. For 4“, 5“, 6“, 8“ and 12“ wafers.

– Protos Carrier ND series Carrier for diced wafers, can contain between 13 and 25 wafers depending on the model. Compatible with 6“, 8“ and 12“ framed wafers.

Our ADT dicing saw is a state-of-the-art saw that is fully programmable and controlled by a microprocessor. It is designed for cutting wafer-thin materials into smaller component pieces, with a specific focus on silicon wafers. However, by using the appropriate configuration and blade type, it is capable of cutting any thin material.

Key Features 

• New User Interface (NUI) Upgrade Kit
• Dicing Floor Management (DFM)
• Height Measurement Tool (HMT)
• Dressing Procedure

AIM Solder provides high quality alloys and complimentary materials to the electronics industry. AIM’s variety of solder alloys provide solutions for issues commonly found within the SMT assembly industry. AIM products are produced using AIM’s proprietary ElectropureTM process that produce a low drossing and low oxide alloy. AIM’s solder alloys are engineered to be compatible with a variety of PCB assembly products including solder paste, solder wire, and flux.

Key Features

• Tin-silver-copper alloy in line with JEIDA recommendation
• Gold die-attach alloy
• Standard electronic assembly alloy prior to RoHS

With an ever-increasing emphasis on accountability, AMADA WELD TECH’s WM-100A is the most advanced resistance welding monitoring system available from any manufacturer. Built in the USA, the WM-100A offers more of the information you need for resistance welding process development, production monitoring and data to support your ISO, and GMP and TQM requirements. Not only will it monitor what happens during the weld, but also before it is triggered, giving you a true 360-degree view of your welding process.

The IPB-5000B-MU inverter spot welder delivers superior welding control for a wide range of microjoining applications. When paired with the ITB-780A6 transformer this unit is capable of a maximum output of 6000 Amps, making it ideal for most resistive and conductive welding applications. It operates in constant current, voltage or power feedback modes and is also capable of welding in a combo mode (current and voltage) to address even the most challenging application or process conditions.

Key Features

• Control Modes – Optimum control modes for obtaining ideal weld quality and consistency can be chosen from; constant current control, constant voltage control, combination of constant current and constant voltage control, and constant power control.

• GOOD/NO GOOD determination – The comparator feature allows to set upper and lower limits around the measured value of up to four parameters; which are current, voltage, power and resistance. When those values reach out of the limits, an error signal or a caution signal alarms.

• Diplacement Measurement – Measures how much an electrode moves down because of material collapse during weld. Weld to displacement – stops welding when displacement value reaches the set value. Requires displacement sensor sold separately.

• Envelope – The envelope feature allows dynamic limits to be set around a monitored waveform to ensure the same resistance change occurs at the same rate for every weld.

The LF Series fiber lasers offer the precise control needed for small component welding and fine precision cutting of metals. A large touchscreen pendant enables clear visibility of process schedule parameters, and an intuitive interface enables quick and easy programming.

• Spot sizes down to 10 microns
• Penetration depth beyond 0.06 in (1.5 mm) in metals
• Fine, high quality cutting of metals
• Excellent power stability
• Simple, intuitive user interface
• Touchscreen

The HF-2500A high frequency inverter spot welder addresses the challenges of micro welding for a wide range of applications. Precise control of weld energy with high speed closed loop feedback and weld quality tools ensure high yields for the most demanding welding applications. Built in the USA, the HF-2500A high frequency inverter spot welder may be used in conjunction with one of our many weld heads as a single operator benchtop resistance welder and is also well-suited for integration into semi or fully automated resistance welding systems.

• Constant current, voltage, and power modes
• Monitors energy and resistance
• 2400 A maximum
• 25 kHz feedback
• Active Part Conditioning (APC)
• Pre-Weld Check
• Weld to Limits