AccuLiFT™ is an automatic reel storage system using the traditional Vertical Lift Module (VLM) design concept to achieve high storage capacity while minimize machine foot print. A person is no longer required to manually feed the reel storage system one at a time or manually load reel pallet one reel at a time. All the users need to do is to stack 30-100 reels onto multiple stacking units and the robotic arm will pick up the reels from the stackers and place them into the storage system.

Zero defect wave soldering requires consistent solder quality. Contaminants and high oxide levels in bar solder can result in a variety of wave soldering defects such as bridging, projections, and poor wetting. To avoid these issues, AIM’s low drossing solder bar alloys provide a high purity product exceeding IPC, JEDEC and IEC requirements.

AIM Electropure™ bar solder is processed from high-quality, virgin metals in a proprietary method that removes contaminants and reduces dissolved oxides. AIM’s Electropure™ technique results in an extremely pure, low-drossing solder bar that increases throughput and decreases defects.

Key Features

• Low Oxide Content
• Reduces Defects Such as Bridging and Icicling
•  Lower Surface Tension than Competitive Brands
• Available in Extruded, Cast, and Margash Bars
• Produced from High Purity Virgin Metals

The unit offers consistent welding output for repeatable process results, with ultrafast rise time for conductive material welding. Built in the USA, featuring fully controllable dual pulse output, the CD-A1000A provides pulse shaping with 4 discrete pulse lengths, programmable squeeze and hold times and adjustable pulse separation.

The IS-800A/1400A is a DC inverter-controlled welding power supply designed for high-precision spot welding with customizable settings for various welding applications. It features enhanced safety measures and control options, ensuring stable, quality fusing.

HF2 is a 2kHz, state-of-the-art high frequency inverter welding power supply used to join small parts at high speed. Built in the USA, the HF2 High Frequency Inverter Spot Welder, is a high speed digital adaptive feedback controls weld current, voltage, or power, providing better weld consistency as compared to traditional AC or CD technologies.

The UF Series provides targeted heating and precision temperature control for hot bar soldering applications such as the connection of flexible circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding of gold ribbon.

Lasers welders produce a beam of high intensity light which, when focused into a single spot, provide a concentrated heat source, allowing narrow deep welds and fast welding speeds. The process is frequently used in high volume applications such as in the automotive and medical industries. Laser welding is a non-contact process which requires access to the weld zone from only one side of the parts being welded. There are many joint geometries that can be welded, but there must be a close fit-up at the joint interfaces, which makes tooling a key aspect for laser welding success.

MM-400A welding monitor enables operators to monitor and manage key welding variables that result in changes in weld heat such as current, voltage, time, force and displacement. The compact unit supports a wide range of resistance welding technologies including AC, DC inverter, AC inverter, transistor and capacitive discharge. It features a simple and intuitive user interface and color touch panel display.