All Products

Explore our site to discover the innovative solutions you need, including cutting-edge scientific equipment, advanced semiconductors and electronics products, and more.

Filter

Filtered (24)
Filters
Search
Show (24)
Cancel

Showing all 24 results

  • Buhler – Die Casting Machines, Peripheries

    Carat is a two-platen die casting machine made by Buhler that is available in 13 sizes with a locking force from 10,500 to 44,000 kN. Special casting units can be adapted to their intended application which makes the Carat the best solution for cu…

    Carat is a two-platen die casting machine made by Buhler that is available in 13 sizes with a locking force from 10,500 to 44,000 kN. Special casting units can be adapted to their intended application which makes the Carat the best solution for customers that manufacture large and complex parts that have to meet the highest requirements for quality.

    Learn MoreDone

  • Buhler – Die-Casting Machines – Carat

    Carat is a two-platen machine with die locking forces of 10500 to 92000 kN, designed for die casting your large and complex parts, such as structural components, while increasing productivity by up to 30%.

    Carat is a two-platen machine with die locking forces of 10500 to 92000 kN, designed for die casting your large and complex parts, such as structural components, while increasing productivity by up to 30%.

    Learn MoreDone

  • Buhler – Die-Casting Machines – Ecoline S

    The Ecoline S and Ecoline S Pro die-casting machines offer locking forces from 3400 to 8400 kN for the production of aluminum and magnesium parts.

    The Ecoline S and Ecoline S Pro die-casting machines offer locking forces from 3400 to 8400 kN for the production of aluminum and magnesium parts.

    Learn MoreDone

  • Buhler – Die-Casting Machines – Evolution

    With die locking forces of 2600 to 9000 kN, our Evolution machine is the proven die-casting solution for your aluminum and magnesium parts, offering you the potential to increase productivity by up to 30%.

    With die locking forces of 2600 to 9000 kN, our Evolution machine is the proven die-casting solution for your aluminum and magnesium parts, offering you the potential to increase productivity by up to 30%.

    Learn MoreDone

  • Buhler – Die-Casting Machines – Fusion

    Fusion is the flexible solution for die casting aluminum and magnesium with 5500 to 14000 kN die locking force.

    Fusion is the flexible solution for die casting aluminum and magnesium with 5500 to 14000 kN die locking force.

    Learn MoreDone

  • Buhler – Die-Casting Machines Series

    We manufacture advanced die-casting machines from 3,400 up to 92,000 kN locking force. From a single machine to a fully integrated die-casting cell, we build customized solutions for your foundry. Every die-casting system is engineered to meet you…

    We manufacture advanced die-casting machines from 3,400 up to 92,000 kN locking force. From a single machine to a fully integrated die-casting cell, we build customized solutions for your foundry. Every die-casting system is engineered to meet your precise production needs.

    Learn MoreDone

  • Drake – Dual Spindle Thread Grinder

    Drake Manufacturing is committed to producing precision CNC machine solutions and providing legendary service for global customers in the thread grinding industry.

    Drake Manufacturing is committed to producing precision CNC machine solutions and providing legendary service for global customers in the thread grinding industry.

    Learn MoreDone

  • Ecoclean – Solvent-based Cleaning – EcoCcore

    The system design of the EcoCcore combines all the benefits of a solventbased cleaning system with extremely simple operation.

    The system design of the EcoCcore combines all the benefits of a solventbased cleaning system with extremely simple operation.

    Learn MoreDone

  • Gecam – Finishing Machines – Brushing Machines

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Brushing Machines: Gecam CUB Brushing Machine, 761 Brushing M…

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Brushing Machines: Gecam CUB Brushing Machine, 761 Brushing Machine, GT13 Brushing Deburring Machine and Easy T Edge Rounding Deburring Machine.

    Learn MoreDone

  • Gecam – Finishing Machines – Chamfering Machines

    The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two chamfers on both sides of the piece in one pass, ensuring a significant red…

    The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two chamfers on both sides of the piece in one pass, ensuring a significant reduction in processing times. It consists of a cabinet base, which can hold spare abrasive belts and any accessories and is equipped with four swivel wheels, two of which with brakes. Variable speed conveyor belt unit, which can be tilted up to 30 ° to facilitate the insertion and alignment of the pieces during automatic processing. The speed of the conveyor belt can be read on a display directly in meters / minute and can be varied by acting on the appropriate potentiometer.

    Learn MoreDone

  • Gecam – Finishing Machines – Deburring Machines

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Deburring Machines: GT06 Sanding Deburring Machine,  GCB Sa…

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Deburring Machines: GT06 Sanding Deburring Machine,  GCB Sanding Deburring Machine, GE30 Belt Deburring Machine, GE60 RX Finishing Deburring Machine and Stiffelio G11 Sanding Deburring Machine.

    Learn MoreDone

  • Gecam – Grinding Machines

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Grinding Machines: Gecam 533 Large Grinding Machine, 128 S/SL Large Grinding Machi…

    For over 20 years Gecam has developed and manufactured machines for grinding, polishing, deburring and finishing of sheet metal. DKSH offers complete range of Gecam Grinding Machines: Gecam 533 Large Grinding Machine, 128 S/SL Large Grinding Machine, 522 Flat Grinding Machine, 288 Pipe End Grinding Machine, 134 Variable-Angle Notching Machine and 135 Automatic Grinding Machine.

    Learn MoreDone

  • Gecam – Sheet Metal Treatment – Filtering Solutions – Dry and Wet

    Wet dust filtering system equipped with soundproofed fan, tank with float, front panel with plexiglass cover for inspection of the starting spray. Simple and safe vacuum operation that guarantees constant results over time. The …

    Wet dust filtering system equipped with soundproofed fan, tank with float, front panel with plexiglass cover for inspection of the starting spray. Simple and safe vacuum operation that guarantees constant results over time. The sucked air passes through a vertical labyrinth to immerse itself several times in the water contained in the tank located below, generating some vortices and nebulizations that force the suspended particles to precipitate before reaching the fan impeller and then reaching the exhaust pipe. 

    Learn MoreDone

  • Gecam – Sheet Metal Treatment – Levelling Machine

    For 25 years GECAM has been developing and manufacturing machines for grinding, satin finishing, deburring and finishing of sheet metal. Pursuing as the founding value of its production the attention to the quality of the 100% Italian material, ov…

    For 25 years GECAM has been developing and manufacturing machines for grinding, satin finishing, deburring and finishing of sheet metal. Pursuing as the founding value of its production the attention to the quality of the 100% Italian material, over the years it has been able to become a reference production reality for the sector.

    The highly qualified staff allows a constant development of the production for the primary objective of satisfying the customer’s needs. The high quality guaranteed by an entirely local production and an efficient and punctual service allows GECAM to establish itself on the world market boasting 75% of total export sales compared to 25% on the national territory.

    Learn MoreDone

  • Gecam – Sheet Metal Treatment – Metal Sheet Grinding Machine

    Machine designed for cleaning edges of sheet metal strips with width from 30 to 450 mm and thickness from 0.5 to 4 mm, with separate electrical system. Two front heads with crossed free belt that work simultaneously and break th…

    Machine designed for cleaning edges of sheet metal strips with width from 30 to 450 mm and thickness from 0.5 to 4 mm, with separate electrical system. Two front heads with crossed free belt that work simultaneously and break the corner both above and below, two horizontal rear heads with belt on contact wheel to ensure satin finishing. The piece slides on a series of rollers with adjustable springs which can be opened using a digital tool. Heads individually adjustable through a special handwheel to ensure adequate contact of the tape on the piece.

    Learn MoreDone

  • Maegerle – Flat and Profile Grinding Machine

    Mägerle MFP series – The long-distance machine With the MFP series, Mägerle comprehensively covers the requirements for flat and profile grinding machines. These machines specialise in creep feed grinding as well as profile and flat grinding o…

    Mägerle MFP series – The long-distance machine With the MFP series, Mägerle comprehensively covers the requirements for flat and profile grinding machines. These machines specialise in creep feed grinding as well as profile and flat grinding operations using the pendulum method.

    Learn MoreDone

  • Maegerle – Grinding Centres

    Processes such as grinding, cutting and drilling can be achieved to absolute perfection in a single clamping. High productive benefit with simple operation are the result.

    Processes such as grinding, cutting and drilling can be achieved to absolute perfection in a single clamping. High productive benefit with simple operation are the result.

    Learn MoreDone

  • Maegerle – MGC Workpiece Carrier

    The MGC grinding centre with stationary table is designed for the high-precision processing of large and heavy workpieces. With a broad range of different table sizes and vertical strokes, this machine meets the highest requirements in respect of …

    The MGC grinding centre with stationary table is designed for the high-precision processing of large and heavy workpieces. With a broad range of different table sizes and vertical strokes, this machine meets the highest requirements in respect of load bearing capacity.

    Learn MoreDone

  • Maegerle – Special Grinding Centres

    The standardised Mägerle modular concept can be freely configured to provide individual solutions. Grinding centres which are completely tailored to specific customer requirements are developed within the scope of a proven product range.

    The standardised Mägerle modular concept can be freely configured to provide individual solutions. Grinding centres which are completely tailored to specific customer requirements are developed within the scope of a proven product range.

    Learn MoreDone

  • Nanotech – Grinding machine – 100UPGv1

    Ultra-Precision Aspheric Grinding System.

    The Nanotech 100UPGv1 is an aspheric ultra-precision grinding system specifically engineered for grinding of Tungsten Carbide and Silicon Carbide aspheric optical mold inserts used …

    Ultra-Precision Aspheric Grinding System.

    The Nanotech 100UPGv1 is an aspheric ultra-precision grinding system specifically engineered for grinding of Tungsten Carbide and Silicon Carbide aspheric optical mold inserts used in glass press molding as well as grinding of aspheric glass lenses. It is also suitable for single point diamond turning of symmetric optical components. The system is available in either a XZ or XZB configuration. It provides a 100mm diameter swing capacity for grinding applications and a 250mm diameter capacity for diamond turning.

    Learn MoreDone

  • Studer – Conventional Cylindrical Grinding Machines – S20 & S30

    STUDER conventional cylindrical grinding machines are designed for the grinding of workpieces in individual as well as small and large series production operations.

    The S20 is designed…

    STUDER conventional cylindrical grinding machines are designed for the grinding of workpieces in individual as well as small and large series production operations.

    The S20 is designed for grinding medium-sized workpieces in individual and batch production. It is suitable for use in any industry where precise small components are manufactured. Operation is very simple and the machine can be reset very quickly.

    The S30 is designed for grinding workpieces in individual and small batch production. It is suitable for use in any industry where precise medium-sized workpieces are manufactured. Operation is very simple and the machine can be reset very quickly.

    Learn MoreDone

  • Studer – External Universal Cylindrical Grinding Machines

    From the entry level machine for the most important applications to the all-rounder for complex grinding tasks. Small to large workpieces for individual, small and large-scale production. You have the choice between five universal cylindrical grin…

    From the entry level machine for the most important applications to the all-rounder for complex grinding tasks. Small to large workpieces for individual, small and large-scale production. You have the choice between five universal cylindrical grinding machines with center distances of 400mm (15.7″), 650mm (25.6″), 1000mm (40″) and 1600mm (63″) and a center height of 175mm (6.9″).

    Learn MoreDone

  • Studer – Internal Cylindrical Grinding Machines

    The internal cylindrical grinding machines are designed to solve almost anything you need: Flange parts, spindle shafts, spindle housings, rotor shafts, bushes and much more for the areas of machine tools, drive elements, aerosp…

    The internal cylindrical grinding machines are designed to solve almost anything you need: Flange parts, spindle shafts, spindle housings, rotor shafts, bushes and much more for the areas of machine tools, drive elements, aerospace and toolmaking.

    Whether flange parts or spindles up to 1 300 mm (51.1″) in length, the universal internal cylindrical grinding machines can master any challenge.

    Learn MoreDone

  • Studer – Production Cylindrical Grinding Machines – S11 & S22

    The Studer S11 production cylindrical grinding machine is the youngest S11 and the smallest machine in the company’s portfolio and is tailor-made for workpieces up to 200 mm in length.

    If space-sa…

    The Studer S11 production cylindrical grinding machine is the youngest S11 and the smallest machine in the company’s portfolio and is tailor-made for workpieces up to 200 mm in length.

    If space-saving is your priority, then the S11 is the right machine for you. In a space of less than 1.8 m² the S11 produces extremely efficiently and reliably with a grinding wheel diameter 500 mm.

    Learn MoreDone
About DKSH

Who We Are

Lab Solutions

Services

Business Lines

Commercial and Industrial Applications

Precision Machinery

Scientific Solutions

Semiconductor & Electronics

Order Online

LabShop

Delivering Growth – in Asia and Beyond

Follow Us

© DKSH International Ltd.  All Rights Reserved.

test block for Laos

Contact us

Your download – just a few steps away

Please enter your details here:

test